LED flashlight is a new type of flashlight with LED as the light source. LED is ideal for portable lighting because of its high brightness, low power consumption, long life, small size and other advantages.
Although the popularity of cell phones is now increasing, want to light up, you can directly open it, but the lighting function of the phone consumes electricity quickly, in some special occasions to use the environment is not convenient. Therefore, the flashlight is still one of the necessities of outdoor activities. But how to choose a flashlight? The following LED Flashlight Suppliers to introduce you to the LED flashlight purchase tips and the advantages of LED flashlights.
LED flashlight shopping tips:
1. Pay attention to the bulb
Pay attention to the number of bulbs: the number should be moderate. The number of LED flashlights for home use is best not to exceed 12. The batteries used are best divided into 2 or 3 sections. Any larger would be a bit of a waste. For other special needs can be determined as needed. Of course, the number of high-power LED flashlights generally cannot reach 12.
Pay attention to the brightness: a good LED flashlight brightness, slow decay rate.
Pay attention to the aperture of the aperture: a good LED flashlight aperture is uniformly round. Poor quality LED flashlight aperture is divided into yellow and blue unevenly distributed. The bead spotting surface should be spotted as much as possible. Unlike ordinary flashlights, this flashlight can adjust the focal length, so we should pay attention not to have diffuse light when shopping.
2. Pay attention to the internal structure
Pay attention to the welding: welding is very good . Each bipolar is connected to the circuit board by soldering. If the false solder contact is not good, it may cause the solder bead not bright or affect the overall use. Each bipolar is connected to the circuit board by soldering. If the dummy solder contact is not good, it may cause the solder bead not to light up or affect the overall use.
Pay attention to the battery: LED Flashlight has two kinds of ordinary batteries and lithium batteries. Although the lithium battery is a rechargeable battery, but the life is low, about 2 years, led is about 10 years, you can choose according to the actual situation.
3. Pay attention to the external structure
Pay attention to the waterproof: good LED flashlight with waterproof function, good shock resistance, that is, the ability to resist falling. Because it is an electronic product, there is a circuit board in front of the LED flashlight. Once in the water, it is easy to short circuit and cause damage.
Pay attention to the appearance: you can choose the LED flashlight with aluminum alloy casing.
Pay attention to the shape: you can choose the right size and shape of LED flashlight according to the specific use occasion and purpose.
What are the advantages of LED flashlight?
1. The service life of LED flashlight is more than 50-100,000 hours, which is 5-10 times longer than traditional tungsten lamp life.
2, LED flashlight heat low, do not hurt the lamp head, high safety.
3. LED flashlight has fast response, impact resistance, good weather resistance, small size and light weight.
4, LED flashlight power saving, low power consumption, green environmental protection materials.
5, LED flashlight response speed of only 1us, no need to preheat the lamp to improve safety.
6, LED flashlight low voltage drive safety.
I hope the above sharing will be helpful to you, in addition the company also provides Led Headlamp Rechargeable, if you need, please feel free to contact us!
In daily life, we need to use LED flashlights whether in work or life. First of all, it should be clear that the flashlight we choose is mainly used for what? Because different types of flashlights have different uses. Choose the right flashlight will play a maximum role in different application scenarios. So how to choose a suitable led flashlight for you? Today in the article, we will briefly introduce what you need to pay attention to when choosing a LED flashlight.
1. LED flashlight brightness
Flat avenue walking on the brightness requirements are not high, a power of more than 1W AA flashlight will be sufficient. If you use a rechargeable 14500 battery, then use the power of a larger.
2. LED flashlight price
According to personal economic strength, the general choice of low-cost led flashlight will be enough.
3. LED flashlight battery life
The pursuit of high brightness, with 18650 lithium batteries. Power 3W, the current 750MA flashlight is enough to use. Endurance time in three hours
Rechargeable 14500 batteries, discharge current of about 2A, the endurance time of about 1 hour
The high-quality capacity of 2200MAH alkaline AA batteries, discharge current of about 1A, the battery life of about 2 hours. If you use 2A current discharge is very uneconomical, often only high light for more than half an hour; best with 500MA current discharge, the endurance time can reach about 2 hours.
4. Outdoor led flashlight type
18650 straight tube: high power, high brightness, about 3 hours of battery life.
Larger power AA tube: batteries can be bought everywhere, easy to carry, about 1 hour of endurance.
5. Requirements to achieve the appearance of the treatment
Depending on personal preference.
6. LED flashlight with what circuit
18650 cartridge is best to use the 7135 constant current circuits, not recommended to use the boost circuit. The reason is that the 7135 circuit is the most stable and efficient. 7135 constant-current circuit is the disadvantage that when the voltage is low to a certain level, the more you use the lower the brightness. This disadvantage does not affect much when walking. For AA flashlight, that can only use the boost circuit. It is best to use good quality and high efficiency to save power to achieve the purpose of extending the endurance.
7. require waterproof performance
Can prevent heavy rain can be.
8. LED flashlight light color
In the case of dry roads with white LED on the line. If it is a mountainous area or in a slippery situation, it is best to use warm white or natural white LED to increase the color rendering. At the same time, there can be more powerful flashlights on the high-power flashlight, after all, safety is most important.
9. Flashlight circuit to what gears
High, medium, flashing three gears are more practical. Burst flash is mainly used to remind people and cross the road.
Like outdoor sports friends will often use LED flashlights, it can not only help us light but also protect our safety in the outdoors. We are a LED flashlight supplier , please feel free to contact us if you need them.
Streamlight Stinger Flashlight
Tap Tap to Zoom
- Flashlights 101Light OptionsFeaturesApplications
About the Author
Steve has never not known guns. Before motorcycles, money, or girls, they have always been part of his life. He was tenured as General Manager of one of the country’s largest gun stores and ranges, a buyer in a big box outdoor sporting goods store, and is currently OpticsPlanet’s Director of Product Intelligence. He was a US Navy nuclear gunners mate, a private investigator, and is an NRA certified instructor in ten categories, as well as an Illinois CCW instructor. He shoots competitively and has hunted from Alaska to Africa. He thoroughly loves life with his beloved wife, Shirley, and together they live with their three wildish dogs Tinker, TranRek, and Crash Almighty. He is a stubborn stage 4 cancer survivor and isn’t ready to cash in his chips yet.
Continue following Steve’s gun-laden lifestyle with never-ending firearm excursions and experiments with related products! Visit his blog page at Riflescopeblog.com.
SureFire HellFighter Heavy Gun Spotlight
Choosing a flashlight can be a daunting task. There are so many questions you need to ask before making your flashlight selection! What is a lumen? What’s the difference between xenon bulbs and LEDs? Are rechargeable batteries appropriate for you or not? How big should the flashlight I select be? What should I spend? The list goes on. In this article I will try to explain some flashlight basics so that you can make a more informed decision to better fulfill your needs.
The first thing you need to do is identify your flashlight needs. Do you want a light that is cute as a bug for an automobile glovebox? For around the house when the power goes out? Head mounted for tracking a wounded deer? Secured under a weapon? Like many other tools, some flashlights are suited to very specific tasks. You probably don’t need a $5,000.00 Surefire Hellfighter Spotlight to check circuit breakers; likewise, most compact pocket flashlights won’t blind a home invader.
Key Flashlight Terms
Pelican 7060 LED Rechargeable Flashlight
Bezel – front part of light that often includes flashlight lens, reflector, and bulb
Candlepower, or Peak Beam Candlepower – The measurement of the brightest spot in a focused beam
CR123 – The most common size of 3v lithium disposable battery because of their tremendous weight to power ratio
Fast Charger – A transformer used for quick charging lights that sometimes has capabilities of being used with different overseas currents
Halogen Bulb – A clean burning bright bulb that maximizes light output with halogen gas that helps keep the interior of the bulb clean
HID – High Intensity Discharge lamps replace the filament with a capsule of gas. Very bright and efficient and uses less power. Requires a ballast
Incandescent – A bulb which uses a thin filament with electrical current passing through it
LED – Light Emitting Diodes. Durable and long-lived lightbulbs. Up to 100,000 hours run time. Soft focus, short range. Less power than incandescent but can give 100’s of hours of run time at low illumination levels
Lumen – A measurement of the entire output of the bulb. Focus is not considered
NiCd – Nickel-Cadmium rechargeable battery. Rugged with high performance
NiMH – Nickel-metal hydride rechargeable battery
Reflector – Surrounds the bulb and focuses and directs the beam
Run Time – How long the batteries will last
Xenon Bulb – A clean burning bright bulb that maximizes light output with Xenon gas that helps keep the interior of the bulb clean
Flashlights empowered by LED technology are a bright solution for every dark problem you might encounter while you are camping, hunting or hiking. Understandable, you have reached the right article. Together, we will go through the most popular Led Flashlights Brands that will suit your needs.
Olight manufactures military and tactical LED flashlights. Their products are high rated because of their durability, functionality and flexibility. The Olight M23, in particular, is one special flashlight! It has all the functions as its famous predecessor the M20, with 1050 lumens and distance more than 500 meters. Olight has paid extra attention to the functionality level, you can choose from 20 till 1050 lumens. If you decide to choose the lowest setting, it can work for 600 hours! Olights always uses the most durable materials such as aircraft-grade aluminium with special anodised finish. If you choose Olight, you won’t go wrong, because they are one of the top brands in the world.
Nitecore was established back in 2004 and started in a noble and simple way by creating DIY flash lights, yet today has become the world leading manufacturer of LED flashlights. Their most famous flashlight is the TM16GT that has lumen power of 3600 and a stretch distance of 1003m, which is truly amazing! Nitecore has invested all of their hard work and dedication to create this perfect flashlight. The aero grade aluminium built makes one the most durable flashlight on the market. And not just that, the four CREE LEDs give smooth throw distance that can last up to 610 hours depending on which lumen count is used. The lens is made with tough clear glass that has an anti-reflective coating. The integrated polarity compressor prevents unnecessary damage whenever you decide to change the batteries. One thing that Nitecore brings, is the freshness of their designs and of course the extra accessories that they sell their products such as Lanyard, tripod for hands-free option and much more.
Founded in 2004, Fenix is a company that is specialized in light manufacturing and creating high-quality illumination tools. One of their most prestigious brands is the RC40 with 3500 lumen power. Weighing around 1300g, this light can throw light up to 710 meters on 90-degree wide beam angle and up to 160 hours of constant usage. Fenix paid special attention to the durability of their devices like they did with the RC40. The extra durable aluminium offers great longevity and the anti-roll and slips resistant design will protect it from any type of unfortunate damage. The integrated protection can withstand overcharge, overheating and over-discharge. When it comes to the recharging abilities, Fenix has outdone themselves and crowned themselves as the kings of all LED flashlights brands.
If you need a tactical flashlight with high entertainment and help with outdoor survival, you need to carefully make a choice. The flashlight needs to be strong enough, and its lifespan and battery are long and durable also.
This article will introduce you how to choose the tactical flashlight. The reason to chose a tactical flashlight instead of an ordinary flashlight, because a tactical flashlight features better performances. A good tactical flashlight is equipped with a qualified and long-lifespan lamp, and also a safe and durable power supply, so it won’t drop the ball at the last minute. But how to identify whether a tactical flashlight is good or not?
Lamp and Power Supply
Most of the flashlight is equipped with a LED lamp, featuring great energy efficiency and with much a longer lifespan. The disadvantage of a LED is it burns out easily, so you’d better confirm with the supplier about LED brand information. Generally, Luminus, Cree and Osram LEDs are well-known brands and qualified enough for you.
There are two types of power supplies, or batteries, one is disposable and the other is rechargeable. If you want to choose a tactical flashlight that uses disposable batteries, make sure that the battery model is available around you or in the market. Do not choose flashlights with rare battery models, because batteries are difficult to buy.
Needless to say, the advantages of a rechargeable battery are money-saving and worry-free. It can be used all the time as long as they are not broken. But tactical flashlights that use rechargeable batteries also have disadvantages.
First of all, the battery cannot be used immediately and cannot be used while charging. Secondly, after the rechargeable battery is used for a long time, charging problems may occur. Therefore, it is recommended to prepare an additional battery charger and battery to ensure the normal use of the flashlight.
Lumens and Lighting Condition
Lumen is a physical unit that describes luminous flux and is used to measure the amount of light passing through an object per second. The higher the lumen value, the brighter the flashlight and the more power it consumes.
Some tactical flashlights even have a stroboscopic function, which produces super bright light to confuse or frighten the opponent and prevent the opponent from moving forward. In an emergency, a tactical flashlight can save your life.
If you want to choose a flashlight based on the lumens and lighting conditions of the flashlight, you need to consider the following points:
* Whether the flashlight has multiple modes to choose from, and a strobe mode to blinding the opponent’s eyes is a great plus.
* The beam distance of the flashlight.
* The runtime of the flashlight at the settings with great performance.
* An extra hitting part to break windows, doors or combat the opponent is a plus, like Cyansky K3 long range tactical flashlight.
For tactical flashlights, tactical capabilities are also key issues that need to be considered, including:
* Weight: Generally speaking, the lighter the weight of the tactical lights, the better, and it is easy to carry.
* Finish Processing: The black flashlight is more tactical, and more concealed when operated at night.
* Weather Resistance: You’d better to choose a flashlight that is resistant to high and low temperatures, and is waterproof.
* Lens material: Generally speaking, a plastic lense is lighter and more versatile. Please choose a scratch-resistant lense.
Creative Writing – The first blog that follows all the guidelines of a clean internet blog and informs the visitors and his subscribers with useful information only
How to choose the best LED flashlight?
The Science and technology have advanced to such an extent that it has forced many other sectors to bring innovative solutions. In the past 20 years, nobody knew that traditional electric lamps would advance to LED flashlight to catch up with the trend.
The development of the Light Emitting Diode, LED has managed to replace the standard "bulbs".
Nowadays, picking the best LED spotlight, is complicated, and here’s what you need to know to learn how to choose the best LED spotlight.
Size of the flashlight is the key
Gone are those days when you required something looking like a small-sized light to focus on an object. Most lights today are purchased as Everday use lights which means they are 6" long or less, and around 1" thick. There are a lot of smaller than normal size lights going from around 1 ½ " to 4" long. These are a defined as everyday use lights. Battery choices for these sizes will be covered in a matter of seconds.
Most turn on/off from a back "click switch". Be that as it may, of late, there's been a push in prominence to reevaluate the antiquated side switch. A few lights will have the two switches working to turn on and off the light. It depends on you to decide which light is good for you. The advantage of a tail switch is that it has tactical capacities. A few lights even work as a dimmer-switch. It'll simply have a ring beneath the head. Turn the ring, and you go from off and truly faint to truly splendid! It's truly cool!
Area of application
If you want to buy a flashlight for camping, hiking, outdoor use, you should check if it can withstand normal wear and tear. While river rafting or doing any activity that involve water, it is important to carry a flashlight that is water-proof. Also, you can look for a light that comes loaded with shock-proof features. The best LED lights are one that are durable and designed using materials that can offer maximum comfort to the buyer.
Range of Lumens
This is a significant term to be acquainted with since each light will promote its top lumen level. Barely short of 10 years prior, 1000 lumen flashlight were considered useful. Today, 100 lumens fails to measure up to those donning somewhere in the range of 300, as far as possible up to 800 lumens!! A meager few uncompromising model even game 1000 lumens! In all actuality, if utilizing a light ONLY for inside, (and particularly in pitch obscurity – [indoors]) a simple 10 lumens or LESS will be all the light you'll require! But at the same time, it's acceptable to have choices accessible for outside use, or if an electrical power outage happens. Numerous lights will stand upstanding and can be utilized like a candle. For outdoors, climbing, and general outside exercises after dull, you'll find even 100 lumens is not good enough. A few lights will have a lumen range from as low as 1, as far as possible up to 400 (for instance) with increases between the two.
Lights will likewise contrast as far as focusing capacity – the distance wherein the light can sparkle a valuable visibility. This is generally dictated by how far down the LED is situated inside its reflector. This distance will be estimated in meters.
This one is a big deal! Since the best LED flashlight, may just sudden spike in demand for ONE battery. In what way? Peruse on.
Why You Should Use a Flashlight for Self-Defense
Summary: Identify the threat Temporarily blind the attacker Use the non-lethal weapon against your aggressor Why Should I Use a Flashlight for Self-Defense? Flashlights today are up to 100 times brighter than they were in the year 2000! Flashlights are so bright now they can force someone to:
Emergency Situation Flashlights
Key Takeaways: During a power outage, a lantern will provide the best light. A super bright flashlight increases chances of survival if you are lost in the woods. The unexpected happens, a waterproof flashlight is a great way to stay prepared. EDC flashlights just make everyday life much easier. We’ve All Been There Recently here […]
Flashlight Safety 101
Last modified on May, 2021 by Chinhua
Key Takeaways: Keeping the flashlight beam pointed away from the eyes is great flashlight safety. Use the lockout setting on your flashlight when you carry it in your pocket to prevent accidental turn on or battery leak. Using your flashlight on lower brightness settings will help prevent it from overheating. Storing batteries in dry places […]
The Anatomy of a Flashlight Beam
Last modified on April, 2021 by Chinhua
Flashlight Beam Key Takeaways The hotspot is the center of the beam and the spill is the surrounding of the hotspot. A floody beam refers to a wide-angle beam while the thrower refers to a beam that projects a long distance. The shape of the reflector affects the beam. There are two main textures of […]
Flashlights: 4 Things To Consider When Buying A Flashlight
Last modified on April, 2021 by Chinhua
In this guide: Flashlight Outputs | Flashlight Sizes & Shapes | Flashlight Materials | Flashlight Batteries | Rechargeable Flashlights | NITECORE Flashlights by Series Flashlight Basics: How to Choose a Flashlight With so many LED flashlights available, it’s easy to feel overwhelmed when trying to find the best flashlight for your needs. To cut out […]
How Bright is My Phone Flashlight?
Last modified on March, 2021 by Chinhua
Key Takeaways: The flashlight on your phone is about 40 – 50 lumens. A phone flashlight has a diffused beam, good for illuminating small areas close by. A dedicated flashlight is recommended for most outdoor activities for the brightness, distance, and runtime.
How Many Lumens do I Need for a Flashlight?
Last modified on March, 2021 by Chinhua
Key Takeaways For everyday tasks, a 1-300 lumen flashlight For common outdoor tasks, a 300-980 lumen flashlight For worklight, then a 1000-1500 lumen flashlight For Hunting, Law & Military, a 1250-2500 lumen flashlight For Search & Rescue, a 3000+ lumen flashlight
What Makes A Good Police Flashlight?
Last modified on March, 2021 by Chinhua
Key Takeaways: A good police flashlight is bright, 1000 lumen minimum. Long battery life is important, at least 30 minutes on the highest setting and 15 hours on its lowest. You want a flashlight that is made from strong and durable material, like metal or titanium. You want a decent-sized flashlight that is also large […]
High Lumen Flashlights: The 10 Brightest Flashlights NITECORE Makes
Last modified on December, 2020 by Chinhua
High Lumen Flashlights You’ve probably noticed that many flashlight manufacturers will boast about the “high lumen” output a flashlight can reach. Lumens, if you didn’t know already, are the unit of measure for brightness and an easy way for you as a consumer to judge if a flashlight will meet your needs. Less than a […]
Finding Your Preferred Flashlight User Interface
Last modified on December, 2020 by Chinhua
Picking The Best Flashlight Switch Tail switch flashlights are great for overhand grip or cigar grip. Twist switches allow you to cycle through the brightness modes by tightening or loosening the bezel. Side switches allow for your thumb to easily control the flashlight in a regular grip. For more versatility, a flashlight with both a […]
LEDs, or Light Emitting Diodes (a diode is a device that only allows electricity to flow through it in one direction, which is why LEDs have a positive (+) side and a negative (-) side) are silicon wafers that emit photons (light) when an electrical current passes through it.
What is a Discrete LED?
LED Light Module
Discrete LEDs provide only a light source and leave the details of configuration, mounting, polarity, and alignment to the end user.
What is a LED Light Module?
A LED light module is a single or multiple discrete LED(s) configured and mounted to a printed circuit board with polarity connections. LEDdynamics designs and manufacturers LED light modules to help companies get access and easily use the latest LED technology.
What is a LED Light Engine?
LED Light Engine
A LED light engine is the same as a LED light module with the addition of LED driver electronics. This allows the LED to connect directly to power.
How do LEDs compare to traditional lighting?
The most significant distinction between traditional lighting devices (an incandescent light bulb, fluorescent tube, neon fixture, etc.) and LEDs is that LEDs do not use heat or a gas to generate light. An LED is a ‘Solid State’ device that contains no fragile filament or glass tube, making it an extremely durable and reliable light source that can be used in ways never before possible.
Where are LEDs being used?
The most common uses of LEDs are in consumer electronics and other equipment as indicator lights (the green or red ‘power on’ lights on a VCR or computer monitor).
Only with the introduction of HB (High-Brightness) LEDs and HF (High-Flux) LEDs, have LEDs been considered a “useable light source” for flashlights, accent lighting, signage, general-illumination and other applications.
LEDs are used in applications where long life and reliability is required. Many have been illuminated for 25 years and continue to function. Because LED use much less current than other light sources and run on low voltage DC, they are naturally suited for many battery powered applications. In very cold temperatures, LEDs turn on instantly while some fluorescents would fail to light. LEDs also generate smaller amounts of heat than their incandescent (filament) counter parts.
How do I choose the right LED?
To choose the right LED for your product or application, you should have a general understanding and knowledge of the different types of LEDs, their typical applications, and their differences in electrical, physical, optical and thermal characteristics. There are many different types and brands of LEDs on the market today and finding the LED that best suits your particular project requirements is essential for achieving the maximum performance, longevity and overall success of your LED product or application.
The first consideration when choosing an LED is to determine if a particular wavelength or color is desired for the application. Determining a specific color range (wavelength) or temperature range (degrees kelvin) of light to be used will significantly narrow the range of available LEDs that are suitable, and that can be considered for the application.
Next, the type of available power and drivability of the LED needs to be determined. LEDs of different wavelength (color) and type have different power requirements, electrical characteristics and thermal management requirements. The type of available power is a major factor in determining the best LED or LED circuit configuration for the application. In higher voltage applications, it may be more suitable to use many smaller LEDs, in place of one or two larger LEDs, to reduce the amount of power and heat that needs to be regulated.
Refer to the LED manufacturers’ specification documentation for information on electrical, physical, optical and thermal characteristics in order to become familiar with the LEDs that are being considered for the application, or contact LEDdynamics support for more information on how to choose the right LED and driver for the job.