By Bo Moore published 31 October 18
Your monitor is filthy. Here’s how to (safely) clean it.
Dirt, dust, and fingerprint smudges aren’t going to do any long-term damage to your monitor, but they certainly might distract you while trying to headshot Tracer in Overwatch. Let’s face it, your monitor is filthy—it’s time to clean it.
You might think that cleaning your monitor is easy, and you’re right. But the process is slightly more complicated than just wiping it with the corner of your t-shirt—or even worse, a paper towel. Here are a few do’s and don’ts:
How not to damage your monitor
PC Gamer is going back to the basics with a series of guides, how-tos, and deep dives into PC gaming’s core concepts that we’re calling The Complete Guide to PC Gaming. There’s much more to come, and it’s all being made possible by Razer, which stepped up to support this months-long project. Thanks, Razer!
Before we start, let’s go over a few big no-no’s, as accidentally damaging your monitor is a pricey mistake we want to avoid.
First off, avoid corrosive substances! That means no alcohol- or ammonia-based cleaners (like diluted rubbing alcohol or Windex). These cleaners can damage your screen by stripping anti-reflective coatings, cause clouding, or worse. Monitors have come a long way from the giant glass bulbs of old-school CRT screens, but that means they’re a lot more sensitive too.
Next, be careful what you use to wipe the screen. Paper towels might seem like a good option, but at a microscopic level, they’re actually quite abrasive. Ditto to t-shirts or other household rags, which might be harboring a stowaway spec of sand, metal, or something else that could scratch up your display in a single wipe.
Finally, you never want to spray your cleaning agent directly onto your monitor. Excess liquid runs the risk of pooling in the corner of your screen, seeping in through tiny weak spots and wreaking havoc on the sensitive materials inside.
How to clean your PC monitor
With those words of warning aside, let’s get down to the business of cleaning that monitor. For simple dustings, a blast of compressed air (the same stuff you use to knock dust out of your case fans) should do the trick, possibly followed up by a quick dry wipe-down.
As for what you wipe with, microfiber cloth is your best friend. Microfiber is extremely soft (at a microscopic level) and known for attracting dust and absorbing oils. Most importantly, it won’t damage your screen. We like these, or these if you want to step up to a more plush option.
Of course, make sure the cloth is clean before you use it, and be particularly careful of any grit getting on the fibers. A single speck of dirt or sand could do more harm than all your careful preparation. Depending on your environment, you might be able to use the same cloth for weeks, or it might need to be swapped out after just a few uses.
For a little bit of extra cleaning power, slightly dampen your cloth with distilled water (no impurities to cause accidental damage), but not so much that water can be wrung out of it. Remember, we don’t want liquid to run down the screen and collect in the edges and corners. If water alone isn’t doing the trick, mix a cleaning solution of 50 percent distilled water, 50 percent white household vinegar. Same deal as before—apply liquid to the cloth, not the screen.
When wiping your screen, try to avoid circular motions or buffing a single particular spot. Instead, use light pressure and wide, sweeping motions from side to side or top to bottom. It might seem trivial, but again these are sensitive electronics we’re cleaning, and better to be mindful of your technique than buff in a costly repair.
As the former head of PC Gamer’s hardware coverage, Bo was in charge of helping readers better understand and use PC hardware. He also headed up the buying guides, picking the best peripherals and components to spend your hard-earned money on. He can usually be found playing Overwatch, Apex Legends, or more likely, with his cats. He is now IGN’s resident tech editor and PC hardware expert.
Even the best computer monitors can get dirty or scuffed up just like any piece of technology. Modern displays are sensitive pieces of equipment, so we have assembled some tips on how to safely sanitize and clean your LCD, OLED, or LED screen.
How to Clean a Monitor Screen
Cleaning a computer monitor is on the simpler side, but there are still some definitive steps to take to ensure the overall longevity of the display.
Tips to Safely Sanitize Your Display
Here are a number of useful tips and things to avoid while cleaning and sanitizing your computer monitor. This way, you won’t violate your computer’s insurance or damage the device.
Turn Off Your Monitor Before Cleaning
The very first thing to remember is to make sure your computer display is turned off before beginning the cleaning process. Cleaning the monitor while it is powered on could accidentally cause damage, including dead pixels . Additionally, cleaning the monitor while it is powered down makes it easier to complete the cleaning process, as you’ll have an easier time seeing dirt, grime, and dust.
Warning: Cleaning the monitor while it is powered on could accidentally cause damage, including dead pixels. Plus, if you damage the device yourself, there’s a good chance your monitor’s extended warranty may not cover it.
Use a Microfiber Cloth
Generally speaking, one should use a high-quality microfiber cloth to safely clean a computer monitor. These microfiber cloths are incredibly gentle and will not cause damage to the screen. We suggest taking the cloth and cleaning the surface of the monitor in smooth, long motions. This alone should be enough to get rid of any dust buildup. It may not, however, be enough to handle caked-in grime and dirt. There’s also a way to clean a monitor screen without streaks if marks bother you.
Tip: Generally speaking, one should use a high-quality microfiber cloth to safely clean a computer monitor
Avoid Harsh Cleaning Chemicals
Take great care to avoid harsh cleaning chemicals when it comes to making sure your computer monitor is thoroughly sanitized. You can use a gentle cleaning agent that is advertised for use with computer displays, but water should suffice in most instances. We do recommend using distilled or filtered water for this procedure, as tap water could contain minerals or other substances that could be harmful to the monitor . If the grime does not respond to water alone, add a bit of distilled white vinegar to the cleaning agent.
Warning: We do recommend using distilled or filtered water for this procedure, as tap water could contain minerals or other substances that could be harmful to the monitor
Tip: If the grime does not respond to water alone, add a bit of distilled white vinegar to the cleaning agent
Allow it to Dry
If you have used water to thoroughly clean the surface of the monitor, be sure to let it fully dry before powering it on. We would suggest at least an hour. If one does not wait long enough for a proper drying process to occur, the electrical components of the monitor could become damaged due to moisture.
Warning: If one does not wait long enough for a proper drying process to occur, the electrical components of the monitor could become damaged due to moisture
For 99% of your everyday dust and fingerprints, a damp microfiber cloth should adequately service most computer monitors.
If there is a touch stain (such as food) on the monitor, you can also try using a mixture of 50 percent distilled water and 50 percent white vinegar.
The best tips to remove smudges and stains from a PC monitor or an HDTV.
Matt Elliott, a technology writer for more than a decade, is a PC tester and Mac user based in New Hampshire.
Even if you don’t have snot-nosed kids or wet-nosed pets, your computer monitor or HDTV panel will eventually accumulate a collection of annoying smudges and stains. My household happens to contain both of the aforementioned creatures and, thus, I’ve developed a method for wiping down the HDTV in the living room and the LCD monitor in my office, as well as the screen of my laptop and iPad.
If you take a quick survey of LCD or HDTV manufacturers about the recommended method for cleaning the surface of your monitor or TV screen, you’ll discover more don’ts than dos, often in conflict with one another.
In the don’t column:
- Don’t use aerosol sprays, solvents, or abrasives. (This means don’t reach for the Windex under the kitchen sink, as tempting as it may be.)
- Don’t use anything other than warm water.
- Don’t use any liquid at all.
- Don’t spray a liquid directly on the screen.
- Don’t use a hard cloth.
- Don’t use your fingernail or a sharp object to remove stubborn stains.
In the do column:
- Use a dry, soft, lint-free cloth, preferably the micro-fiber cleaning cloth that may have come with your TV or monitor.
- Use a solution of mild soap and water, if needed.
Taking all of the above advice into consideration and speaking from my own experience, the following is my recommendation:
First, attempt to clean your screen with a dry, lint-free cloth. If you can’t find the cleaning cloth that came with your screen in question, then it’s likely you have one laying around from a laptop, iPad, or iPhone purchase.
If a dry cloth doesn’t remove the smudges and stains on your screen, then get yourself two cloths and a solution of diluted dish soap and warm water. (I use Dawn dish soap, and just a drop.)
After removing any dust from your screen with a dry cloth, dip the other cloth in your dish soap solution, wring it out, and gently wipe your display. Next, rinse out your soapy cloth, wring it out again, and wipe your display to remove any soap residue. Finally, take your dry cloth and wipe the display to remove any streaking.
Do you have any tips or cautionary tales about cleaning monitors or HDTV displays? If so, please share in the comments below.
Editors’ note: It’s time for spring cleaning! Week’s two’s theme: physical cleaning. Check back every day this week to see how best to keep dirt, grime, crumbs, and other annoying bits off your devices. And be sure to return next week for more spring cleaning tips and tricks.
- You should purchase a microfiber cloth and a cleaning spray that has been purposely designed for computer monitors.
- Power down the monitor before attempting the cleaning process, making sure it is not plugged in.
- Apply cleaning agent to the cloth and start in the center of the display, working outwards in a circular motion.
Time Required: 5 minutes
Total Steps: 4
Tools Needed: Microfiber cloth and approved cleaning agent
It is important to keep your best computer monitors and related displays clean and smudge-free, though many consumers may be wondering exactly how to do this without causing unsightly streaks.
Cleaning LCD Screens
Cleaning LCD screens, or any type of display, is a rather simple process that requires only a couple of tools and a few minutes of your time. In other words, it is a worthy undertaking to pursue.
How to Clean a Monitor Without Streaks
Cleaning a computer monitor or a display of any kind without leaving streaks will require a bit of preparation. Follow the steps below to successfully complete the cleaning task.
Step 1 – Gather Your Tools
The most difficult part of the cleaning process is acquiring and laying out the necessary tools. We strongly recommend that you invest in a number of microfiber cloths, which are purpose-built for cleaning computer monitors and other sensitive pieces of equipment. You should avoid paper towels, dirty shirts, and other course types of fabric, as they could damage the monitor . Next, you may want to buy a cleaning agent that has been approved for use on computer monitors. There are a number of cleaning sprays available that are primarily intended for use on displays.
Tip: We strongly recommend that you invest in a number of microfiber cloths, which are purpose-built for cleaning computer monitors and other sensitive pieces of equipment
Warning: We strongly recommend that you invest in a number of microfiber cloths, which are purpose-built for cleaning computer monitors and other sensitive pieces of equipment.
Step 2 – Power Down the Monitor
Whenever you clean a piece of electrical equipment, you should always power it down first. Make sure your computer is turned off and not plugged into an outlet before you begin the cleaning process.
Tip: Whenever you clean a piece of electrical equipment, you should always power it down first
Step 3 – Clean the Monitor
If you are using a cleaning spray or liquid of any kind, be sure to gently apply it to the microfiber cloth. Take care to leave one side of the microfiber cloth dry. Then, approach the monitor and start at the center. Clean the monitor using circular motions as you work your way out to the edges of the display. Be careful around the edges and make sure that no liquids come in contact with these corners, as that can damage the internal components. Repeat this process until the monitor has been cleaned.
Warning: Be careful around the edges and make sure that no liquids come in contact with these corners, as that can damage the internal components
Step 4 – Dry the Monitor
Once the monitor is cleaned, use the dry opposite side of the microfiber cloth to gently wipe the display until any liquid has been absorbed. Then you should wait for around a half-hour or so until the monitor is fully dry.
Tip: Once the monitor is cleaned, use the dry opposite side of the microfiber cloth to gently wipe the display until any liquid has been absorbed
Avoid corrosive substances when cleaning a monitor. That means no alcohol or ammonia-based cleaners (like diluted rubbing alcohol or Windex). These cleaners can damage your screen by stripping anti-reflective coatings, causing clouding, or worse. (Source)
You don’t want to damage it just in case your homeowner’s insurance won’t cover your computer monitor. Otherwise, you’ll have to replace it with your own funds.
How to clean monitor screen? It’s inevitable that over time, your computer monitor will get dirty. The good news is that it’s easy to clean, and you don’t need any special equipment. Simply a soft cloth and some water are all you need.
Clean Monitor Screen Steps
Here are the basic steps:
- Turn off your computer and unplug the monitor from the electrical outlet.
- Mix a small amount of multipurpose or all-purpose cleaning solution with water in a spray bottle according to the manufacturer’s directions. To avoid damaging plastic and other monitors, don’t use window cleaners, ammonia, alcohol, acetone, or any strong cleaner.
- Spray the screen with the cleaning solution and allow it to air dry for 30 seconds. Do not spray on your computer’s electronic components, including motherboards and video cards.
- Wipe the monitor clean with a soft cloth and some gentle pressure and go in one direction only.
- Turn your computer and monitor back on and test the screen to make sure it’s clean.
- Reconnect the computer and monitor, if necessary. You can also reconnect peripheral devices such as a printer or scanner, too.
Clean Monitor Screen Tips & Warnings
- To avoid damaging plastic and other monitors, don’t use window cleaners, ammonia, alcohol, acetone, or any strong cleaner.
- Do not spray on your computer’s electronic components, including motherboards and video cards.
- Go in one direction only (usually up or down).
- You can also reconnect peripheral devices such as a printer or scanner, too.
- Don’t spray cleaning solution directly on the screen. Spray it on your cloth first and then use the wet cloth to wipe the screen clean.
- Never use paper towels or other such materials which may scratch the screen. Instead, use soft cloths made of cotton or microfiber.
How to Clean a Computer Screen with an LCD or LED Display
If your computer screen has an LCD or LED display, then you should clean the monitor using a special microfiber cloth. These types of screens are usually more sensitive than CRT-based monitors, so be sure to follow the manufacturer’s instructions carefully.
How to Clean Computer Screens Using Regular Clothes
If you do not have access to a microfiber cloth, then use a cotton cloth instead. Ensure the cloth is soft and free of lint. Do not spray water or any other liquid directly onto the computer monitor or keyboard as this may cause damage. Instead, just dampen your cloth with clean tap water to remove dust and dirt from the screen.
Clean Computer Monitor with a Microfiber Cloth
Using a microfiber cloth is safe for most types of computer screens and monitors, but be sure to check your machine’s manual before attempting to clean it with a special cloth or any liquids.
Use a soft microfiber cloth, a cotton swab, or a cotton ball to clean the screen. You can purchase microfiber cloths or make your own at home by cutting up an old pair of soft cotton jeans. If necessary, use a very small amount of water mixed with some multipurpose cleaning solution on the cloth.
Be sure not to let any excess liquid drip onto the keyboard as it may damage the computer’s electrical components.
Take care not to use too much liquid or press too hard on the screen with your fingers, as this can cause damage. Don’t spray cleaning solution directly onto the monitor, but rather dampen the cloth first and then wipe down the monitor.
Clean Mac Screens vs. PC Screens
Most computer monitors and LCD screens are compatible with common glass cleaners. However, you should always check your owner’s manual to make sure that these types of products will not damage the monitor. Some manufacturers recommend that you use a solution made of equal parts water and distilled white vinegar for cleaning monitors.
If necessary, use an old toothbrush or cotton swab dipped in the solution to clean inside the small grooves on an LCD monitor.
Don’t spray any solutions directly onto your computer screen or keyboard as this may damage some types of monitors and keyboards.
How to Clean a Laptop Screen with Vinegar Solution
To use a simple vinegar solution for cleaning laptop screens, first, dampen a soft cloth with the mixture and wipe down the screen. Then, use another clean, dry cloth to remove any remaining streaks or moisture from the monitor.
Note: Because laptop screens are usually very sensitive, never spray water or any other liquid directly onto them as this may cause damage.
Using vinegar solution is considered safe for most computer monitors and LCD screens, but do check your owner’s manual first to be sure this type of solution will not damage your monitor.
Is It Possible to Use Alcohol Wipes to Clean My Display?
Although alcohol wipes are available in stores, avoid using them to clean computer monitors. This may be okay for LCD screens, but never use this type of product on an old-fashioned CRT monitor as the liquid may damage it.
The adhesive on tape designed to remove dust from your screen can also cause problems if you choose to use it for cleaning. Likewise, avoid using pressurized air on your monitor as it can create static electricity that attracts dust and dirt.
Instead, use a soft cloth lightly dampened with water or a very small amount of mild dishwashing liquid to remove fingerprints and smudges from the screen of your computer monitor.
How Do I Clean My Laptop Screen?
Clean your laptop screen with a soft, clean cloth dampened with water and mild dishwashing liquid. Wipe the screen in straight lines from top to bottom; use another clean part of the dampened cloth if necessary.
How Do I Clean Dust from My Pc Screen?
It is usually best to use a special commercial cleaning solution made just for computer monitors and keyboards. If necessary, you can also clean your monitor with a mixture of equal parts distilled water and white vinegar.
How Do I Clean My Mac Laptop Screen?
Most LCD screens are compatible with regular glass cleaners, but always check the owner’s manual first to be sure these types of products won’t damage your monitor. Some manufacturers recommend that you use a solution made of equal parts water and distilled white vinegar for cleaning computer screens.
Can I Use Windex on My Laptop Screen?
Windex should not be used to clean laptop screens because it may damage the sensitive monitor. Use a soft, slightly damp cloth to remove smudges and other marks from your laptop screen.
Can I Use Lens Wipes on My Monitor?
You should never use lens wipes to clean any monitor. While these products are intended for computer screens, they can potentially damage CRT monitors when the alcohol content is too strong.
Can I Clean My Computer Monitor with Alcohol?
Although it’s fine to use alcohol-based cleaners on LCD monitors, you should stay away from this type of product if you have an old-fashioned CRT monitor.
Can I Use Clorox Wipes on My Monitor?
Clorox wipes are not recommended for cleaning computer monitors. These types of products may be okay for LCD screens, but avoid using them on CRT screens as the liquid could damage them.
Tim Brookes is a technology writer with more than a decade of experience. He’s invested in the Apple ecosystem, with experience covering Macs, iPhones, and iPads for publications like Zapier and MakeUseOf. Read more.
There’s definitely a wrong way to clean your TV or monitor screen. Mess it up and you’ll be looking at scratches, smears, or worse for a long time. Get it right and your display will gleam like the day you bought it.
Before you reach for a duster or cleaning solution, make sure you read this.
First: Consult The Manufacturer’s Instructions
Your TV or monitor manufacturer likely has its own set of cleaning instructions for your specific display type. This goes for LG OLEDs, Samsung QLEDs, and Dell touchscreen monitors.
While these manufacturer guides often err on the side of caution and recommend very little in the way of cleaning products, you may also find some specific advice to your particular display and the types of coatings used on it.
Some manufacturers, like Dell, recommend 70-90% isopropyl alcohol on some products. Others like LG recommend never even moistening the display. If your display is still under warranty, you might want to carefully follow these instructions to avoid any problems if you have to make a claim later on.
Avoid Harsh Cleaning Chemicals
By far the most important thing to remember is to avoid any harsh cleaning chemicals, including glass cleaners like Windex, polishes, and even isopropyl alcohol unless you have specific clearance from the manufacturer that this will not damage the screen.
Such cleaning products are usually made with ammonia, alcohol, and contain other products and fragrances that could damage the display. These screens often have protective coatings on them to combat glare and reflections, or oleophobic coatings to repel fingerprint oil in the case of touchscreens.
If you’ve already used something like this will no ill-effect, consider yourself lucky and avoid using it again in the future. Many displays will be utterly ruined by the application of these household cleaners, leaving streaks and clouding that could render the display worthless.
Air and Microfiber Cloths Are Your Friends
Canned air is a great way of removing dust from a display surface without causing any damage. Dust particles, though small, may scratch sensitive surfaces when pressure is applied. By not touching the display, you’re minimizing your risk of scratching the delicate surface. This is especially true of glass TV and monitors, like those that use OLED technology.
Falcon Dust, Off Compressed Gas, 3.5 oz Can
This can of compressed air is perfect for safely cleaning your electronics, and the can is compact enough to fit in your computer desk.
Second to canned air is a high-quality microfiber cloth, ideally one with deep grooves to catch all of the dust without moving it over the screen. Use the lightest of touches when cleaning to avoid undue pressure on the display. You may need to turn to a microfibre cloth when canned air simply won’t cut it.
Avoid any paper-based cleaning products like tissues or kitchen towels since this contains lots of small fibers that can scratch the display. This is good advice in general when cleaning anything reflective, whether it’s a shiny plastic gadget or a pair of reading glasses.
You should take care when cleaning the microfibre cloths too. Avoid putting them in the wash with any fabric softeners or in the dryer with a dryer sheet since these products contain oils and waxes that may transfer to any surfaces you wish to clean. This will leave unwanted streaks on your display.
Lastly, if your microfibre cloth has a tag then be aware that the tag probably isn’t made of the same microfibre material and may cause damage to your display. For peace of mind, snip off any tags with a pair of scissors before using the cloth.
Use Distilled Water Where Necessary
When air and dry microfibre cloth don’t cut it, you may need to turn to distilled water instead. While tap water often contains particles and minerals that may scratch your screen, distilled or “pure” water does not.
Use a pump spray bottle to mist a microfibre cloth until just damp, then spot-fix any stubborn grime that has adhered itself to your screen. This will likely only work for dry matter. Oil and other streaky marks will likely need a different approach.
Be aware that some manufacturers will never recommend using any moisture near your display. LG is one such display manufacturer that dissuades customers from doing so, though the company does not acknowledge that a dry microfibre cloth is often not enough to remove stubborn dirt.
You’ll have to use your intuition at this point. We’ve used distilled water and a microfibre cloth to remove dried-on grime from a glass-panel LG OLED with no ill effect since the alternative was a distractingly dirty screen.
Screen Cleaning Products Exist if You Need Them
Some experts recommend using a small amount of dishwashing liquid dissolved into distilled water to remove oily stains with a microfibre cloth. Once you’ve attacked the effective area, a clean microfibre cloth that’s been moistened with distilled water should remove any remaining residue.
AudioQuest CleanScreen Kit with Cleaning Fluid, Microfiber Cloth and Retractable Brush
A purpose-built cleaning solution for screens of all types, complete with a microfibre cloth and cleaning brush.
What You Need
- Computer monitor
- Microfiber fabric
- distill water
Cleaning your admonisher is besides a moment more involve than a bare wipe-down, and there are certain products you shouldn ’ metric ton use. In this article, we ’ rhenium going to talk about the right way to clean your computer monitor .
Some words of warning
While it may be tempting to reach for a bottle of Windex or some other general cleaning product, don ’ triiodothyronine ! harsh chemicals may be finely for windows or countertops, but they can wreak havoc on computer monitors, wearing away coatings. There are many cleaning fluids on the market specifically geared toward calculator monitors. While these products indeed work, you don ’ t need to spend money on them if you don ’ deoxythymidine monophosphate want to ; condense water should work for most monitor-cleaning, and you can mix in some white vinegar for refractory dirt .
additionally, avoid newspaper towels, rags, old T-shirts, or any of the common materials you use to wipe down surfaces in your home. Monitors are more finespun than they look, and these fabrics — even paper towels — are abrasive enough to scratch your screen, particularly if you have used them for other jobs where they might have accumulated backbone. A microfiber fabric — the kind you might use to clean your glasses or vinyl records — is the safe option. Just make sure it ’ mho detached of any dirt or dirt before swiping across your display.
How to clean your monitor
Step 1: Turn off your monitor. It ’ second easier to see smudges and stuff on a black screen, so turning off your proctor makes it easier to see what you are doing. It ’ sulfur besides safer for you and your computer. Cleaning your monitor while it ’ sulfur on and the pixels are all fired up could damage your screen or potentially give you an unpleasant electrical jolt. Please turn it off !
Step 2: Wipe your monitor with a microfiber fabric. If dust is the only thing on your screen, a agile wipe should be enough to clean it. Take the microfiber fabric and gently brush the blind in long motions. We can not stress adequate that you should be easy : Pressing excessively hard on the screen could damage the pixels within .
Step 3: If the midst layer of dust on your monitor has been lento replaced with more questionable sludge — possibly some dried mucus from a sneeze that caught you off guard or mysterious spectacles of who-knows-what — then you ’ ll want to use cleaning fluent .
There are pacify clean fluids designed for monitors, but condense water system works well, as mentioned earlier. It ’ randomness important you alone use filtered or distill urine, however, since pat water contains minerals and early substances that can harm the screen or leave annoying streaks. For particularly refractory dirty, add a bite of white vinegar to the water. good be careful not to spill any on your laptop .
Step 4: It ’ s important that you never spray water or other cleaning fluids directly onto your monitor, or it might trickle down to the edge of the screen and seep into the monitor itself and damage the electronic components within .
Step 5: Spray or dab the liquid onto a fabric, wring out any excess fluid, and then cautiously wipe the sieve using across-the-board strokes .
Let your monitor dry
Step 1: Gently dry your monitor with a clean, piano microfiber fabric or let it air dry .
Step 2: To avoid moisture-caused electrical damage, ensure your riddle is completely dry before turning your computer back on .
By Tina | Follow | Last Updated April 20, 2020
The computer screen may get dirty after using it for a while, and it may lead to an unhappy using experience. Hence, do you know how to clean computer screen? This post from MiniTool will show you how to clean a monitor.
If a computer has been put for a long time, a lot of dust will be on it. If the computer has been used for a long time, the computer screen or monitor will become dirty. So, some users wonder how to clean computer screen and would not bring any damage to the monitor.
If you are also looking for solutions to clean computer screen, this post is what you are required because it shows the ways to clean computer screen.
How to lock Windows 10 screen? Use the 5 ways to lock your Windows 10 computer when you walk away from it. Guide for how to set password in Windows 10 is here.
How to Clean Computer Screen?
To clean computer screen is a bit more involved than a simple wiping and there are certain products that you cannot use. Otherwise, the computer monitor may get damaged. So, in the following section, we will show you the right way to clean monitor screen.
Some users may want to use a bottle of Windex or some other general cleaning product to clean computer monitor. Please do not. Harsh chemicals may be fine for windows or countertops, but they may bring damage to the computer monitor, wearing away coatings.
Although there are many cleaning products on the market, it is not necessary to use them. As a matter of fact, the distilled water should work for most monitor cleaning and you can mix in some white vinegar for stubborn grime.
Apart from that, you need to know that paper towels, rags, old t-shirts, or any of the usual materials can’t be used to clean computer screen. Monitors are more delicate than they look, and those materials would scratch your screen, especially if you have used them for other jobs.
So, in order to clean computer screen, the microfiber cloth would be a good choice.
After knowing the material for cleaning computer screen, we will show you how to clean a computer screen.
- The first thing you need do is to turn off the computer screen. It is easier for users to see the stuff on a black screen.
- Wipe the monitor with the microfiber clothe. In addition, please wipe it gently. Press too hard on the screen could damage the pixel within.
- After wiping the monitor screen, you need to let the computer screen dry. To avoid any moisture or electrical damage, make sure your screen is completely dry before turning your computer back on.
From above information, you have known how to clean monitor screen. If you want to clean the monitor screen, try the above steps. When all steps are finished, the computer screen will be cleaned. And when cleaning the monitor screen, please wipe the screen gently so as to avoid giving rise to damage to the screen.
Do you know how to clean laptop keyboard? This post shows you three ways to clean your laptop keyboard.
To sum up, this post has shown how to clean computer screen with three steps. If you want to clean computer screen, try the above ways. If you have any better idea of cleaning computer monitor, please share it in the comment zone.
ABOUT THE AUTHOR
Tina is a technology enthusiast and joined MiniTool in 2018. As an editor of MiniTool, she is keeping on sharing computer tips and providing reliable solutions, especially specializing in Windows and files backup and restore. Besides, she is expanding her knowledge and skills in data recovery, disk space optimizations, etc.
On her spare time, Tina likes to watch movies, go shopping or chat with friends and enjoy her life.
Join the Community
Many laptop and notebook computers now feature a type of screen called a Thin Film Transistor (TFT) monitor. It is not unusual to find the terms “LCD monitor” and “TFT monitor” used interchangeably by computer experts, but the same basic advice applies to either type of screen. To clean one properly, you should use a lint-free cloth and very gentle pressure. If the screen is very dirty, plain water or water with a small amount of vinegar can be used to clean it, but the liquid should never be sprayed directly on the monitor.
Add a small amount of vinegar to water to scrub away excessive dirt.
Putting pressure on a TFT monitor can cause permanent damage to the electronically sensitive crystals pressed between two thin sheets of plastic, which makes cleaning it a trickier process than cleaning its glass-encased CRT cousin. It can also draw moisture into itself through capillary action, so spraying a liquid cleaner directly on the screen can also be problematic. Any moisture absorbed through the screen surface will not come out voluntarily, and could ruin the entire display.
To clean a TFT screen properly, it is important to remember you are dealing with plastic, not glass. Traditional glass cleaners usually contain alcohol or ammonia, which is harmless on glass but bad for plastic. Never use household glass cleaners, since the ammonia or alcohol will eventually cause the plastic to turn yellow and degrade.
A desktop computer with a TFT monitor.
Instead, many experts suggest using clean water and a lint-free microfiber cloth designed for cleaning optics. A small amount of a weak acid, such as vinegar, could be added to the water if the monitor is heavily contaminated with surface dirt or other substances. The cloth should only be slightly damp, and wiping should be in a vertical/horizontal direction. A dry cloth should be used to remove any trace of moisture. Use a very light touch, and only clean a TFT monitor when the power has been turned off.
Some manufacturers of computer peripherals market cleaners intended specifically for LCD, plasma, or TFT monitors. These cleaners usually contain no ammonia or alcohol, although it pays to read the labels before purchasing any commercial cleaning product. Some cleaning kits contain a spray bottle of solution and optical-grade wiping and drying cloths. One or two sprays of the cleaning solution should be sufficient for routine maintenance, although many experts recommend spraying the cloth, not the monitor. It is still important to use a very light touch when wiping the screen with a commercial cleaner.
Some computer users purchase a glare reduction screen or a Lexan® screen protector to prevent the monitor from getting too dirty. When a laptop or notebook computer is folded for storage, the screen may come into contact with the keyboard and pick up traces of skin oils, dirt, or other contaminants. It might be useful, therefore, to wipe down a portable computer’s keyboard before closing the lid. Keeping the monitor out of the reach of young children or inconsiderate co-workers may also help keep it clean as well. Curious people are often tempted to poke at a flat screen monitor, so you may want to take steps to discourage this behavior.
Some computer monitor cleaning kits contain a spray bottle of cleaning solution.
A regular EasyTechJunkie contributor, Michael enjoys doing research in order to satisfy his wide-ranging curiosity about a variety of arcane topics. Before becoming a professional writer, Michael worked as an English tutor, poet, voice-over artist, and DJ.
We all spend a lot of time on our monitors, whether for our jobs or recreational. Because of this, we should choose a monitor that won’t damage our eyes too much.
Matte monitors can help with that. Yet, few people get attracted to it. This is because it looks dull and lifeless compared to the shiny and fancy glossy monitors.
If you do get a matte monitor, then it might be new to you. If it is, then you’ll have so many questions about it.
One important question to ask is, “how do I clean it the right way?”. This is important because it determines how long your matte monitor will last. Here, we’re going to answer that question for you.
What Is A Matte Monitor?
But before we answer that, it’s good to know first what a matte monitor really is.
A monitor becomes matte in two ways. Either it’s matted with an anti-shine paint or an outer polarizer layer. This outer polarizer layer makes the screen coarse through mechanical processing.
The matte coating is the reason why it looks dull and lifeless. It’s also the reason why it makes it preferable for long monitor uses.
Matte’s special property is diffusing ambient light. Your eyes no longer strain from the brightness of emitted or reflected light. You can use it for hours without experiencing headaches, eye strains, or even eye damage.
It doesn’t end there. The diffusing of ambient light makes matte screens clear even in bright surroundings.
Have you ever tried using your monitor with the sun reflecting right at it? How about with a bright fluorescent light right on top? That’ll make it hard to see the screen images – not to mention, annoying.
You won’t have to worry about that anymore. Matte monitors are not reflective, allowing you to see clear images no matter how bright it is around.
Check out this video to see the reflection comparison between matte and glossy:
Of course, there are some downsides to matte monitors. The main one being its image quality.
The diffused ambient light and its own emitted light conflict with one another. The results are hazy images and a decline in color contrast and vibrancy.
How to Clean A Matte Monitor
You can get your hands on many different matte cleaning products. But you don’t really need those. There’s a matte monitor cleaning method that is cheaper and just as effective.
All you’ll need is a microfiber cloth and distilled water. Add alcohol too for the monitor’s base.
Before you start, make sure you turn off the monitor and unplug the power adapter! This prevents it from getting destroyed.
So first, blow or wipe away as much dust as you can. You don’t want these particles scratching the screen when you run the cloth across it.
Next, spray or pour the distilled water onto the microfiber cloth to dampen it. Don’t use too much water that it drips to the monitor’s base. Gently cover every area of the screen with the damp cloth.
Finally, use the dry side of the microfiber cloth, or another microfiber cloth, to wipe it dry. If there are still some water streaks, don’t worry. It will soon dissolve.
Another word of caution. Don’t turn on your monitor until all the water dissolves. This is to keep the insides safe.
Cleaning the base is the same as the screen. But instead of using plain distilled water, use a half-alcohol, half-distilled water solution. The solution should never touch the screen because the alcohol can damage it.
Repeat this process until you’re satisfied with the results.
It’s as simple as that!
Here’s a video that’ll help you visualize the whole process:
Remember when your computer LCD display had that brand-new, fresh out-of-the-box shine? If it’s looking a bit dull lately, we’ll show you how to safely give it a good cleaning.
Ed Rhee, a freelance writer based in the San Francisco Bay Area, is an IT veteran turned stay-at-home-dad of two girls. He focuses on Android devices and applications while maintaining a review blog at techdadreview.com.
Remember when your computer LCD display had that brand-new, fresh out-of-the-box shine? If it’s looking a little dull lately, it might be time to give it a good cleaning. Here’s how:
Step 1: Disconnect the power cord from desktop monitors. For laptop displays, turn the laptop off, unplug the power cord, and remove the battery.
Step 2: Gently wipe the dust from the surface of the display using a dry, lint-free cloth, like a microfiber cloth. Remove any tags that may be on the cloth to avoid scratching the display with the tags.
Step 3: For tough spots, lightly dampen a microfiber cloth with water and gently wipe the display with as little pressure as possible.
If you prefer, you can use a cleanser made specifically for cleaning LCD displays, but do not spray it directly onto the display. Spray a small amount of the cleaner onto a microfiber cloth first, to avoid getting any cleaning solution inside the display.
Do not use any products with the following agents:
- ethyl alcohol
- ethyl acid
- methyl chloride
Those cleaning agents will damage the finish and any special coatings that may be on the display.
Barbie asked how to clean an oily “serum” off her laptop’s touchscreen.
Do you always wash your hands before using your laptop, tablet, or smartphone? Neither do I. And the result isn’t pretty. A chemist could probably take samples from my iPad’s screen right now and tell you what I had for breakfast.
Touchscreens need to be cleaned often. They get dirty quicker than non-touch screens, and the dirt interferes with both the visual experience and touch sensitivity.
[Have a tech question? Ask PCWorld Contributing Editor Lincoln Spector. Send your query to [email protected].]
You don’t have to buy anything expensive and special. Touch screens may be high-tech, but the job of cleaning them requires only simple tools and elbow grease.
You will need a microfiber cloth. You may already have one. Perhaps it came with some device. Or your eyeglasses. If not, you can buy them for a few dollars at computer stores, camera stores, and various places online.
Display as white an image on your screen as possible. For instance, you can create a new word processing document and not type anything in it. The white background will make it easier to see the dirt.
Now wipe the screen, applying slight, and only slight, pressure. Try straight wipes horizontally across the screen. If that doesn’t work, try wiping vertically, or using circular motions.
If the screen is still dirty, you’ll need to prepare my secret screen-cleaning potion. Fill a spray bottle to approximately the halfway point with distilled water. Then fill it the rest of the way with white vinegar. Close the bottle, and shake.
Shut down your computer or device. You don’t want electricity going through it right now.
Spray a bit of the potion onto a microfiber cloth—preferably a clean one. Do not spray directly at the screen. Then wipe as described above.
When you’re done, wipe it again with a clean, dry microfiber cloth—or at least with a clean, dry corner of the cloth you’ve been using. Don’t turn on the device until the screen is dry.
Eventually, you’ll have to clean the cloths. Microfiber Wholesale offers detailed instructions.
So fresh, so clean.
At some point, your computer monitor will get dirty, dusty, or even get some smudges. Since these are expensive screens, you want to be careful when cleaning them and not cause any damage. Here is a guide on how to clean your computer screen properly.
To clean your computer screen, you will need the right cleaner for the type of computer screen you have, as well as a microfiber towel. Using a microfiber towel will help keep the monitor free of any damage or scratches.
Select the right cleaner
Many electronic stores or online sellers will sell a specific screen cleaner for monitors, laptops, and TVs. This is the preferred solution for cleaning screens.
Keep in mind that LCD monitors are different and require a cleaner designed specifically for LCD screens. If you have an LCD monitor, double-check you have the right cleaning materials.
Make sure to avoid household cleaning supplies such as a glass cleaner, like Windex. Using home cleaning supplies can damage the monitor screen. If you are unable to find a screen cleaning solution, you can also use a spray bottle of water with a little bit of vinegar in it. The vinegar helps clean some deeper discolorations or marks on the monitor.
Cleaning the monitor
Be sure not to spray the monitor itself to keep the cleaning supplies out of the corners or other exposed areas on the monitor. This could potentially damage the monitor.
- Lightly spray a microfiber cloth with your chosen cleaning solution.
- A microfiber cloth is ideal for cleaning a monitor because it will help get stains and streaks off of the screen, and it won’t scratch or damage the screen when wiping it down.
- With your screen cleaner or water and vinegar solution on your microfiber cloth, carefully wipe the cloth across the screen until fully clean.
With the right supplies, your monitor will look like it just came out of the box, and you can get back to gaming.
I use soap and water. Monitor wipes suck, and leave streaks. But maybe I have poor quality wipes?
I just cleaned my screen with the old soap and water method. and it didn’t work. I have streaks across the screen and they are bugging me as I type this. Multiple passes haven’t helped.
Should I resort to alcohol?
What are your favorite/effective ways for a streak free clean?
Yeah, that’s a bad idea, on any kind of transparent surface. Try cleaning your windows with soap and water (without a squeegee) and see how long it takes before you don’t see streaks.
Omigod, no. That’s the quickest way to permanently damage your screen – the alcohol is likely to dissolve the surface of most monitors if they have a plastic surface.
Just use distilled water and a microfiber cloth. Now that you’ve got soap scum on your monitor, though, it’s going to be tricky to get it streak-free.
For as expensive and funky-smelling as iKlear is, it generally does a very good job at streak free LCD cleaning.
I use eyeglass cleaner, sprayed on the cloth, not the monitor (to avoid drips), and a microfiber cloth.
I knew that something like acetone would be a bad idea, wasn’t entirely sure about isopropanol (which I use on plenty of other computer parts as a good non aqueous solvent).
What’s in the eyeglass cleaner? Isn’t that alcohol based too? Or is it an ammonia based glass cleaner? (Popular glass cleaners are basically ammonia + vinegar + alcohol + small amount of detergent).
Most eyeglasses are no longer made of glass, so anyone selling eyeglass cleaner with ammonia or alcohol in it isn’t looking for repeat customers.
Use warm water and a lens cleaning cloth. Nothing else. Get a cloth damp. Leaving little droplets of water on the screen is fine, having water run down into the bezel is not. Wipe the screen in straight lines side-to-side or up-and-down. Wipe in the same direction with a dry cloth. If it’s not clean enough, rinse out the first cloth, and wipe it in a direction perpendicular to the first pass. Don’t be afraid to gently scrub if necessary, to remove spots. Rinse and repeat.
I use Promaster cloths, because they’re a lot more absorbent and textured than the cheap microfiber ones you find for 99c at Ritz.
This 1000 times this.
That spray stuff in the blue can/lid. It is the best stuff.
I used it on everything from my Panasonic plasma, Dell 3008 LCD, iPhone, iPad, latitude laptop screens, to all computer screens in my office.
I’ve been using promaster lens cloths and promaster opticlean lens cleaner fluid (same setup I use for camera lenses). This was all based on the theory that a setup that worked well with the fragile coating on a lens would work well with a monitor screen. So far, so good.
I can’t argue with starting with warm distilled water, though.
I use what was recommended in the manual, a 50/50 solution of water and isopropyl alcohol. Contrary to what others have said, it doesn’t appear to have dissolved anything. Also, it only costs cents to make. Been using it for years.
Packaging describes it as: “AR Kleen multipurpose lens cleaner. This product can be used on glass, plastic and anti-reflective coated lenses. None of these ingredients are known carcinogens or hazardous substances.”
Ingredients: Deionized Water (Pharmaceutical Grade), Alkyl Sulfates, Dehypound HSC 5515, [Surfactant COncentrate (Proprietary Blend)], EDTA, Tetrasodium Salt, Triethanolamine)
Plus if you buy a bottle of Costco eyeglass cleaner, refills are free.
Looking at my old school bottle of Kingston screen cleaner, which says it’s safe for notebooks (aka LCDs), that had ethanol in it.
Recently someone asked me if it was okay to spray Windex on her monitor. I think my shriek of horror startled her. It is NOT okay to spray Windex on a monitor, nor anything else. In fact, when it comes to cleaning an LCD screen, there’s a right way and a wrong way. Let’s focus on the right way (natch).
For starters, turn your monitor off. In fact, if you want to eliminate any risk of shock or other electrical damage, unplug it altogether. (I really don’t think this is necessary, but better safe than sorry.) There will be some moisture involved in this cleaning, and the last thing you want is for liquid to come into contact with anything powered.
Next, find a clean, soft cloth (paper towel will do, but it’s far from the best choice), then dampen it with water. Don’t soak it–there should be no dripping to speak of–just get it moist. And don’t use anything other than water. Ammonia- and alcohol-based cleaners can ruin an LCD. If your screen is seriously gunked up, and plain water doesn’t get the job done, here’s a homebrow option: create a 50/50 solution of distilled water and white vinegar.
If you decide to use a spray bottle, make sure you don’t spray it directly on the screen. That’s because drops can seep in around the bezel (and/or land in the keyboard), and, again, moisture and electronics don’t mix. What you can do is spray your water or solution onto the cloth, then wipe the screen. Use a circular motion, which is best for eliminating streaks, and apply only light pressure.
Finally, let the screen air-dry for a few minutes, or gently wipe it dry with a fresh cloth. Only when you’re absolutely certain it’s 100 percent dry, plug it back in and turn it on. And there you go: good as new!
Now keep those smudgy fingers of yours off that precious LCD!
1. Choose the product in need of dust protection
Clean CD Drive
As always, before cleaning up your computer please review the computer cleaning safety tips.
Why clean computer screen and monitor?
Dirt, dust, fingerprints, wood chips—you name it, there is a lot of debris that can collect on your screen and on top of your monitor. On the screen these foreign particles and smears distort the image, making it difficult to read. They may even cause permanent damage to sensitive LCD and CRT screens. Collecting on top of the monitor, a layer of debris can clog the ventilation cooling ports and cause monitor overheating. In an extreme case an overheated monitor may start a fire.
The following instructions apply for cleaning regular (SVGA) monitor screens as well as LCD screens and CRT screens.
Before you begin, collect the following cleaning supplies:
- Soft, lint-free cloth
- Screen cleaner spray (read caution before cleaning monitor)
- Compressed air and/or anti-static computer vacuum
- Mild detergent solution or spray
How to clean your monitor and screen in six simple steps
STEP 1: Unplug the power supply cord and cable from the back of the monitor and allow it to cool for at least 20 minutes.
STEP 2: Vacuum the outside of the monitor, particularly the cooling grooves, holes or slots in the top surface where heavy dust or other debris may have collected. If you don’t have a vacuum, blow canned, or compressed air in short puffs at an angle to the monitor surface. The goal is to remove dust and dirt without letting anything fall into the ventilation holes.
STEP 3: Lightly dampen a cloth with a mild soap solution and wipe down the outside plastic portions of the computer monitor.
STEP 4: Clean the monitor cables and power cord while they are disconnected. Lightly dampen a cloth with mild soap solution and gently pull the cables and cords through the cloth. Too tight a grip may damage the cables. Dry the cables and power cords with a dry cloth.
STEP 5: Check the documentation or call the manufacturer to find out if your monitor screen has anti-glare, or other delicate coatings. If so, ask the manufacturer for cleaning instructions. If it does not have these special coatings you may spray a window cleaner unto a lint-free cloth and wipe it clean. Do not spray directly unto the screen. Chemicals may drip inside the monitor and damage it.
Absent manufacturer instructions, you can safely clean and protect all LCD, plasma, HDTV, flat screen, and CRT displays and monitors with a Klear Screen cleaning kit. Klear Screen is the only formula used, sold, or recommended by leading manufacturers such as Apple, Dell, Sony Vaio, HP/Compaq, Fujitsu, IBM, Panasonic, Samsung, Sharp, Toshiba, and ViewSonic.
STEP 6: For dusty or dirty manufacturing environments using a ShopShield™ computer monitor dust cover is recommended. The innovative ShopShield covers are breathable membranes that totally encase your computer or monitor to filter out dust and dirt, but at the same time allow clean, cool air to pass through. It is an economical way to allow you to keep your computer protected even while it is running.
Cleaning your computer is essential to keep your data safe and extend the life of your equipment:
NEW SPECIAL REPORT
Computer Dust Solutions is pleased to present the Special Report:
“Effects of Dust on Computer Electronics and Mitigating Approaches”
Download your copy immediately!
- Isopropyl alcohol to clean a monitor screen, good or bad?
I’ve heard that it’s safe to use a mix of isopropyl alcohol and distilled water to clean a screen. I’ve also heard that it can damage the coating on an antiglare surface and should be avoided at all costs (like windex, ammonia,etc).
Seen many threads on many tech forums for and against it.
Dell recommends using 70% IPA and 30% water solution.
Virtually all the big tech youtubers say to only use water and microfiber.
So which one is it?
I’ve used isopropyl alcohol a few times and never had any issue.
I rarely do it. I’ve used isopropyl alcohol to clean really dirty monitors (like one monitor that had puke stains that I got from a client). Just to be safe, I prefer to use water and a microfiber cloth, and only use alcohol (and water) whenever I have to remove some stubborn gunk.
Like I said, it never happened to me, but I’m afraid to damage the coating anyway. My mother-in-law had a Sony Bravia TV that ended up with a damaged coating and believe-me: eventually it was almost impossible to see anything on the TV. As far as I know, she used 96% alcohol to clean this TV once (she had no idea it could damage the TV, her previous TV was a CRT with a glass screen), and eventually the coating started to become white. And then it started to get lose in the corners. And then, started to “peel off” by itself everywhere.
Computer screens are prone to dust and fingerprints!
This tutorial will show you how to clean your LCD or CRT screen. The method for cleaning a monitor is very straightforward and can be completed in a few minutes. The LCD instructions are also suitable for cleaning the screen of a tablet PC.
How to clean an LCD screen (flat screen)
What you will need:
- a soft anti-static cloth for the plastic casing (if required).
- a microfibre* lint-free cloth.
- suitable cleaning fluid for the monitor’s plastic case.
- suitable LCD screen cleaning fluid or distilled water**.
- cotton buds
* microfibre cloths (fig 1.1) can be found in automotive and electronic stores. A good substitute would be the soft cloth used to clean eyeglasses, or in an emergency a very clean old pure cotton t-shirt. Never use paper products like tissue!
** for some screens the water may be mixed with isopropyl alchohol for stubborn marks BUT always check the manufacturers instructions for your particular model. If in doubt and suitable LCD screen cleaner is not obtainable use just water, preferably distilled.
Many people own a laptop and use it every day for hours and hours, often without taking proper care of it. This can lead to an accumulation of dirt and dust that is unpleasant to look at or can even be harmful to your health.
Fortunately, there is a relatively easy way to clean your laptop screen using natural products from around the house. In addition, you will avoid damage by not using any harsh chemicals which could ruin the sensitive components on your computer as well as cut down on its lifespan.
Simple Steps to Clean Your Laptop Screen
Step 1: Unplug your laptop from any power source. Even though this may seem obvious, many people simply don’t do it because they believe their laptop battery life will suffer less if they don’t disconnect it completely
Step 2: Use a microfiber cloth to wipe away any dust or dirt that has collected on the screen. The important thing is to not use anything abrasive as this will scratch the screen.
Step 3: Dampen your microfiber cloth with distilled water. It’s important to use distilled water (instead of tap water) for laptop or computer screens because it is free of impurities that could harm the laptop screen.
Step 4: Gently wipe the screen with the dampened cloth. Make sure to use small, circular motions which will prevent any damage to the
Step 5: Gently wipe across your laptop screen from left to right or with small circular motions. Be careful not to apply too much pressure which could cause damage when sliding your hand across the surface of the screen. Let the microfiber cloth do the work.
What’s great about microfiber cloth is that it attracts dirt and dust like a magnet, without leaving streaks or scratching the surface.
Step 6: Once you’ve finished
Step 6: Once finished, turn your laptop upside down and give the keyboard a gentle wipe down to clean up any leftover droplets of water.
Step 7: Leave your laptop screen open to give it time to dry completely.
What Not to Use When Cleaning Your Laptop Screen
Cleaning your laptop screen with the wrong ingredients could wind up causing damage and hampering its performance or lifespan. Never use vinegar or alcohol on a laptop screen as the acidity could damage sensitive electronic components.
Norton 360. Комплексная защита устройств, в которую входят антивирусные программы, Password Manager, резервное копирование в облаке для ПК ‡‡, 4 и многое другое. Все в одном решении.
Бренд Norton является составляющей NortonLifeLock Inc.
© NortonLifeLock Inc., 2022 г. Все права защищены. NortonLifeLock, логотип NortonLifeLock, логотип с галочкой, Norton, LifeLock и логотип LockMan являются товарными знаками или зарегистрированными товарными знаками компании NortonLifeLock Inc. или ее дочерних компаний в США и других странах. Firefox является товарным знаком Mozilla Foundation. Android, Google Chrome, Google Play и логотип Google Play являются товарными знаками Google, LLC. Mac, iPhone, iPad, Apple и логотип Apple являются товарными знаками Apple Inc., зарегистрированными в США и других странах. App Store является знаком обслуживания Apple Inc. Alexa, и все связанные с ним логотипы являются торговыми марками компании Amazon.com, Inc. или ее дочерних компаний. Microsoft и логотип Windows являются зарегистрированными товарными знаками компании Microsoft Corporation в США и других странах. Представление Android Robot заимствовано или модифицировано на основе общедоступных материалов, созданных в Google, и используется согласно условиям лицензии Creative Commons 3.0 Attribution License. Другие наименования являются товарными знаками соответствующих владельцев.
ХОТИТЕ ЗНАТЬ БОЛЬШЕ?
Следите за новостями, полезными советами и обновлениями.
If you’re going to spend time cleaning, you might as well do it right. And when it comes to cleaning electronic devices (especially expensive ones), there’s extra pressure to make sure your de-germing efforts don’t do any harm. Not cleaning devices and screens properly can cause major damage — but that’s no excuse to leave them off your weekly cleaning list. While phone or iPad screens may not be the first thing you might think of to clean, these high-touch, daily-use items are a hotbed for germs.
“It’s important to clean screens to remove germs and to remove fingerprints and skin oils,” says Becky Rapinchuk, founder of Clean Mama. Generally speaking, cleaning an electronic screen is pretty simple: “I pour a little rubbing alcohol (70 percent) on a soft, clean microfiber cleaning cloth and wipe the screen,” Rapinchuk says.
For a closer, more in-depth look at how to best clean specific screens, read on.
How to Clean a TV Screen
The TV should be part of your weekly dusting routine, says Vera Peterson, president of Molly Maid. “A quick swipe with a duster or microfiber cloth will ensure no dust builds up in vents, speakers, or other crevices. Unless something comes into direct contact with your TV over the course of the week (like sticky hands or a food spill, for example) this should be the extent of your regular TV maintenance.”
The screen of the TV should be handled gently. “Unless a cleaning solution is labeled for use on a television screen, it’s best to use a dry duster or microfiber cloth to remove dust,” Peterson tells POPSUGAR. “Plastic areas of your television, such as the legs, can be cleaned like any other plastic surface. Keep in mind, however, that your television is an electronic, so it should never be oversaturated with any product. Always spray into your cloth — never directly on the device.”
Microfiber towels are great for all surfaces, but they’re especially good for those prone to excessive dust, like TVs. And an extra tip: don’t forget about the remote control. “Since the remote is shared by all family members and is a high-touch area of the home, you want to make sure it’s part of a regular cleaning routine,” Peterson says. “It’s best to wipe down with disinfecting wipes and especially timely during cold and flu season.”
How to Clean a Computer Screen
Cleaning a computer is similar to cleaning a TV: use a microfiber or cotton cloth to dust your computer monitor. “Remember to stay away from liquid cleaners when dusting your monitor, since you don’t want to damage your monitor or create permanent streaks on your screen,” Peterson says.
The number one rule when cleaning computers, TVs, or anything electrical is to always apply liquid cleaner to the microfiber towel — never spray directly onto the device.
How to Clean an iPad Screen
Apple has tips for cleaning its products. Remember to always unplug your iPad before cleaning your device, and if you’re using a liquid cleaner, it’s important to power the device down as well. Apple advises against aerosol sprays, bleaches, and abrasives. And, like Peterson recommends, it’s important to only use a soft, lint-free cloth and to not spray cleaners directly onto the item.
How to Clean a Phone Screen
Whether you’re texting friends or playing Zombie games, your phone gets a lot of use — meaning it’s essential to clean it. To do this, unplug your phone, power it down completely, then remove the case. Peterson recommends using a soft, slightly damp cloth to wipe down the device. “Try to avoid getting water in the speaker area,” she says. “If you have isopropyl alcohol in the house for first aid, add a touch for disinfecting. It also dissolves dirt and oil and dries instantly.”
One word of caution from Peterson: never use window cleaner. Also, avoid using paper towels, since they can easily scratch the screen. Peterson suggests carrying around a microfiber cloth to wipe your phone with, if you want to get into the habit of cleaning it regularly.
Cleaning your PC screen sounds effortless and is easily overlooked. So, some people don’t want to buy multiple bottles of detergent, especially when traveling or moving a lot. In this case, eyeglass cleaner would be the first option in mind.
So, can I use eyeglass cleaner to clean my computer screen?
This question cannot be answered as Yes or No. We need to know certain necessary information to decide which eyeglass cleaner is suitable for screen cleaning. In this article, we are going to provide you information on this topic. Let’s kick right in!
Table of Contents
Can I Use Eyeglass Cleaner to Clean My Computer Screen?
The answer can be “Yes” or “No” depending on the product you are going to use on your PC screen. For eyeglass cleaners that have not been made for anti-glare lenses, it should never be used as a PC screen cleaner. The ingredients in these products might harm the quality of your screen.
How about the eyeglasses that were made for anti-glare lenses? Then it will be fine to use it for your PC screen without harming it.
This is because the anti-coating of PC, such as Macbook or other brands, is familiar with camera lenses and eyeglasses. If it is safe to use that product for camera and eyeglasses, it will be OK to apply it on the PC screen.
Even when you find the right product for your PC, you will need to do it right to maintain its quality. It should be done gently without pushing or using too much power over your screen. It is super important to clean your PC screen with eyeglasses cleaner, and we are going to talk about it in detail later on.
Another important thing to keep in mind is that even when the cleaner is harmless for your screen, cleaning the screen with this type of product too often might negatively affect your PC’s anti-reflective coating in the long run.
For that reason, you should only clean it when you need to and do it as gently as possible. You can also choose the right type of PC cleaner for your computer brands or create a home-made mixture for it.
How to Clean My Screen? Five Easy Steps
What Should I Prepare?
Before cleaning your screen, you should prepare all the tools and products to make the cleaning process easier.
First, if you want to use eyeglass cleaner to clean your PC, choose the safe for anti-reflective coating screen and anti-glare coating of lenses or glass. The other things that you need to have are at least two pieces of cloth. You should prepare more if your screen is too dirty.
In case you use a home-made mixture, it will have to prepare an empty bottle to spray the medicine. If you do not have one, then a little spoon will help. We will use the spoon to pour a small portion of this mixture on the cloth to ensure the fabric is not too wet.
That’s it! Now, let’s start cleaning!
Step 1: Wipe Out the Dust
The first thing you should do is carefully wipe out all the dust on your screen with a dry piece of cloth. The reason why you should never jump right into cleaning your PC with the cleaner (or any other liquid) is because when the liquid meets dust, they will form a mixture that makes your screen even dirtier and harder to clean.
If your screen is full of dust, always use the dry cloth on it first. It would help if you chose microfiber cloth over other cotton cloth. Cotton cloth might not be ideal for dust cleaning because it will be harder to clean most of the dust with cotton fabric. Another reason is that some stiff fabric might scratch your screen if you push it too much.
Step 2: Spray the Cleaner on Your Microfiber Cloth
Never pour or spray the mixture directly on your screen. The best way to do so is spraying the substance in a new microfiber cloth (not the one you used for dust cleaning in the last step). Do not spray it too much or too little. When you feel that the cloth is a little bit wet, then it is fine to use.
Step 3: Gently Clean Your Screen with the Cloth
Hold the cloth and gently clean the whole screen from one part to another. After you clean the dust on your screen, some would still stick there. So, do not randomly move the cloth back and forth on your screen because you might spread the dust everywhere.
It will be better to clean the screen line by line because when you see too much dust on the cloth, you can clean it with another cloth (or the other part of that cloth). This little trick will save you so much time.
Step 4: Clean It Again with Dry Cloth
After you clean it with the cleaner, you can clean it again if you still see dust or if the screen is too wet.
Step 5: Dust Cleaning Frequently
As we mentioned above, using cleaner (especially the wrong products) too frequently might badly affect the quality of your screen’s coating. The best way to maintain its quality is to clean the dust off your clean frequently with a dry microfiber cloth. This simple habit will keep your screen always clean, and you will not need to use chemicals on it too often.
What Household Products Can Be Used for PC Screen?
Why Household Products?
Home-made cleaning products with natural ingredients can still perfectly give you a clean screen back, do no harm to your screen, and protect the environment more. However, you need the right ratio between the ingredients, and we are going to show you that.
The Ingredients and Ratio
If your screen does not have too much dust, you can clean the dust first and only use water to clean it. Soak a cloth into the water, then carefully clean your screen. If your monitor is too dirty, then we will use other ingredients.
Two “common” kitchen ingredients for cleaning are vinegar and baking soda. Again, they can help with PC screen cleaning, too.
For vinegar, you will need to mix it with water, and the ratio is 1:1. One cup of water and one cup of white vinegar will be enough for you to clean your whole screen.
If you choose baking soda, then the ratio between baking soda and water will be 2:1. Mix one spoon of water with two spoons of baking soda, then mix them carefully until a thick mixture is formed.
While the vinegar mixture can be poured into a spray bottle and used exactly like the step-by-step guide we provided, baking soda mixture will need to be poured into a cloth.
Can I use eyeglass cleaner to clean my computer screen? The answer is quite clear now after we are breaking down different sides of the topic together.
It is not hard to maintain the quality of your PC screen and keep it clean at all. All you need is some necessary information, and everything will be simple. We hope you found this article useful, and we will see you in ChocolateaAndCraft‘s next sharing blogs!
Someone scribbled on the actual screen surface with a pencil! Is there any safe way to remove the mark w/o damaging surface or pixels?
Thanks, L Carlson
Popular Topics in General Hardware
Well I’m hoping you’re just dealing with a light graphite line on it. You can safely remove that by using an alcohol swab. Wipe with an even pressure of no more than a pound or so of force. Most LCD’s are very resilient to even amounts of pressure.
A soft eraser might also work (not the hard pink ones, but a soft kneaded eraser). Hopefully it’s not scratched but if it is lightly scratched you can use a damp tissue and a small amount of toothpaste to buff out scratches (not the gritty kind, the smooth paste kind).
Just what I would say, but in the other order.
You can also get screen buffing liquid, can’t remember the name but I have it at home. Need to take that in for the big touchscreen.
You have to hope that they didn’t actually mark/distort the surface though. If they did then it’s probably tough luck.
Whew! Several light scribbles, approx. 2×3 inches & 7 or 8 pencil lines. I took the alcohol on a swab and *very* lightly rubbed off a little at a time while swiping as I went w/ other hand with a clean dry tissue. If this happens again I will grab my eyeglass cleaning microfiber cloth instead of a tissue. no nore pencil marks and all pixels are a-ok!
Thanks much, L Carlson
Whew. glad to hear it.
IE exploded before I could post, make sure monitor is off while trying those.
I’ll have to remember it next time we find a stupid user trick.
Wow. why on earth did they mark on the LCD? Not just once as if they might have been showing someone something and not thinking, but 7 or 8 times? I’d take away the LCD and give them a CRT instead! If you don’t take care of nice things, you don’t get nice things! lol
Yes, well, hard to be the furniture and equipment police working in a very busy public library. you’d be surprised at some of the things that happen when people are allowed to themselves and they either think nobody is looking, no one will notice, or they flat don’t care. We do like to give people the benefit of the doubt and chalk most things up to accidents or thoughtless mistakes.
Sure makes life interesting some days! Thanks for all the posts, I sure learned a lot today and the response time was phenomenal! Way to go 😀
Ah yah, wasn’t thinking about a public terminal. Still crazy of them!
It happened at our library just now also. A mother was not watching her toddler. 🙁
This topic has been locked by an administrator and is no longer open for commenting.
To continue this discussion, please ask a new question.
Is it possible to have all computers with the same time?
Is it possible to have all computers with the same time? We have a number of staff workstations that are displaying different times on each station.
Spark! Pro Series – 17 May 2022
Today in History: 17 May 218 – 7th recorded perihelion passage of Halley’s Comet 1536 – Anne Boleyn’s 4 “lovers” executed shortly before her own beheading 1792 – 24 merchants form New York Stock Exchange at.
How the Spice Works: Andrew Das
In this series, we spotlight our very own employees and provide you with a little insight into what it’s like to work here. This month, we’re talking with Andrew (SWZD)! To get things started, can you tell us a little bit about your position and what y.
Snap! Thanos ransomware, CISA warning, iPhone malware, lunar plants, & 2x pay
Your daily dose of tech news, in brief. Welcome to Tuesday, May 17th which also happens to be World Telecommunication and Information Society Day (WTISD or WTD)! The main goal of World Telecommunications Day is to highlight the importance of commun.
Gone but always remembered
Your responses in the thread show an improvement, John.
However I must disagree with your conclusions; of course not as far as cost is concerned but in the area of equating cost with quality.
The two products concerned are clearly of differing quality.
Isopropyl Alcohol (Commonly known as ‘rubbing alcohol’) is low cost. Whereas the product, drawn to our attention by hewee and named Klear Screen, is more expensive. These are the initial outlay in $ costs. I am not convinced, in terms of usages available, that one offers more or less than the other. What I do know is that Isopropyl Alcohol is highly evaporative, toxic “dangerous” if taken internally and is highly flammable.
“Isopropyl alcohol vapor is heavier than air and is highly flammable with a very wide combustible range. It should be kept away from heat and open flame. When mixed with air or other oxidizers it can explode through deflagration” Wikipedia..
“It is also used to clean LCD and glass computer monitor screens (at some risk to the anti-reflection coating of the screen)” Wikipedia.
Floridagirl4 referred to a child, and I think it may safely be deduced – a young child. The mother may be young herself.
So, John, in my opinion your conclusion was hasty and ill-advised.
“Klear Screen’s unique non-toxic and enviornmentally friendly formula. “
Floridagirl should you read this post again I hope you will reconsider your decision to store the cheaper product and go for the one recommended by hewee .
This from the manufactures website here:
“Klear Screen is anti-static and is alcohol, ammonia, and sodium lauryl sulfate free. Our polishing cloths, also made from the finest materials, are ultra-soft and optical grade“.
I cannot find the word ‘flammable’ on the website so am uncertain as to the product’s flammability or otherwise. But it is non-toxic. This item on their product list is the one I would recommend. Here. and do read the FAQs.
Throughout the years, roaches have developed a tolerance to the chemicals used to kill them. If you notice you have roaches in a computer, you can’t use these chemicals anyways. So, how do you get roaches out of a computer without damaging the computer?
Are Roaches Attracted to Computers?
You may be shocked to know that roaches can get into computers. You tend to think of them hiding behind your fridge or stove to stay undetected. They’re known to prefer moist places. However, roaches are known for hiding in electronics like computers in pursuit of refuge and seclusion.
The inside of your computer is warm, which they thrive off of. They’re known to prefer warmer climates, such as Florida and Georgia. They, however, are in the northern states as well but will seek out shelter in places where there’s warmth, like inside of your computer.
Moreover, you might also think that roaches are terrified of light. But, this belief is a wives’ tale. A majority of cockroach species are partial to darkness. However, some species are attracted to the light of your computer and other electronics. During the night, when they feel it’s safe to come out, they have hovered near areas where there’s light, though most will scatter if you shine a light directly on them.
Can Cockroaches Get in Your Laptop?
Cockroaches will end up anywhere they can fit. Unfortunately, they can fit into your laptop and will venture in. As previously mentioned, they like the warmth and privacy that the inside of electronics can provide. They’ll even lay eggs inside of your laptop.
How Do You Know if You Should Check Your Computer for Roaches?
You might not notice any signs your laptop or desktop computer has roaches because they’ll usually hide inside of the device, and that’s even where they’ll lay their eggs. If you feel your computer could have roaches, inspect openings where they could get into, such as ports.
You should also check on the outside of your electronics and around your home for signs you have roaches. If you find you have signs of roaches, you should check your computer for roaches as a precautionary measure.
One sign is roach droppings, which vary in appearance based on the species. Larger roaches may have droppings that are the size of a grain of rice. The droppings are usually round and dark in color. On the other hand, some roaches produce waste as small as a coffee ground or resemble black pepper.
You might notice egg casings in your home. The average casing can hold up to 50 eggs. The most common location for egg casings is around a refrigerator or food cabinet. The female cockroach might also leave the eggs in a damp place, such as around leaky pipes. The eggs hatch, and all that remains is the casing. Casings are long, light brown to dark brown shells. They’re hollow and usually around eight millimeters in length.
The smell can be an indicator that you have roaches. You’ll notice an unpleasant odor if you have them. However, this odor is only present when you have more than one roach because one doesn’t tend to produce enough odor to be noticeable. When roaches die, they also give off a foul aroma caused by their bodies decomposing.
The most obvious sign that you have roaches is when you see one. However, by the time you see one, it usually means that you have quite an infestation.
Can Roaches Damage Computers?
Firstly, roaches can carry disease. If they’ve crawled on the outside of your laptop or desktop, you could unknowingly come in contact with bacteria that they leave behind.
Secondly, they’re also known to damage the inside of your computer. A roach could come in contact with the high-voltage area of your computer. They end up killing themselves at this point because they can’t withstand the current. As this continues to happen, it could cause your computer to short out.
How Do You Clean a Roach Infested Computer or Laptop?
Firstly, you should move the computer to a closed space. Make sure you turn off your computer.
Next, you want to spray the space with some roach killer, being ever so careful as not to get the spray into your computer. The moisture will damage the internal components of your computer. Let the spray remain around the device for the suggested amount of time noted by the manufacturer. Usually, it’s around 30 minutes.
Allow the area to vent for a few minutes, and then remove your computer. Preferably, you should take your computer to an outdoor area and open it up. Although each computer is slightly different, you should remove the screws and can open it up.
At this point, you should hold your computer over the top of a garbage bag and dump the contents into the bag. Make sure you don’t touch the inside of your computer at all because you’re not grounded at this point. Therefore, you could send a spark through the computer and damage it.
You’re still not done. Continue treating your computer outside since this next step could get a little messy. Now, you’ll want to use compressed air to clean the inside of your computer thoroughly of any possible dead roaches. To do this, you should hold the can a few inches away from all computer’s internal components and blow air throughout the computer. Focus on aiming the canister in the nooks and crannies of your device.
Once you’ve thoroughly cleaned out the inside of the computer, you can put it back together and turn it on.
After you’re done cleaning out your computer, you should keep it protected by placing some cockroach prevention solution around where you usually have your laptop or where your desktop computer is set up. Powders like boric acid and diatomaceous earth are commonly used to get rid of roaches.
While you’ll be able to resume using your computer again, your computer is still at risk of reinfestation if you still have roaches in your home. Therefore, the next step you should take is getting rid of the roaches in your home, which, especially with larger infestations, requires a professional company to make sure you have the problem under control since cockroaches are difficult to get rid of.
What I Do If I Can’t Handle Cleaning Cockroaches Out of My Computer?
A local pest control company may assist if you don’t have the stomach to handle cleaning out your electronics for cockroaches. They’ll treat the problem outside of your computer and may be able to get the cockroaches out of the inside of your computer safely and effectively. If not, they might be able to guide you to an electronics repair company that can help.
Keep in mind that some devices may have such a large infestation that the computer isn’t salvable.
Roaches are an awful problem to have. They might make you squeamish just reading about them. However, if you take care of the problem inside of your computer and outside of your computer, you can get them out of your home and possibly save your electronic device.
Whether you are playing games, making reports, or scrolling through the web, a computer screen is likely to have dust and dirt buildups. Most of the time, people tend to wipe them off with just a damp cloth. However, can you use disinfectant wipes on computer screens?
Computer screens get all dulled up and germy because of dust buildups and constant fingerprints touching the screen. This can pose a problem for people who have allergic reactions to dust that may result in constant sneezing. Although a damp cloth is a viable and popular option, let’s find out if the same can be done with disinfectant wipes.
Why Use Disinfectant Wipes?
As their name suggests, disinfectant wipes give you the best possibility of taking out the germs in your computer monitor. That’s why most people are asking, “Can you use disinfectant wipes on computer screens?”
Before you start getting your disinfectant wipes and cleaning off your monitor screen, it would be wise to know first what disinfectant wipes are to know what you are dealing with. So, what are disinfectant wipes? Disinfectant wipes are pre-moistened towelettes or tissues that are used for the removal of bacteria or dirt.
They are best known for being a good weapon for salmonella and staph that may be lurking on different kinds of a surface from person, foods, or animals. To give them an appealing look, they come with a fragrance that is enjoyable and enticing. Simply put, disinfectant wipes are unique products that can be used for a wide variety of applications.
Disinfectant wipes offer a more suitable way to disinfect non-porous or smooth surfaces for a cleaner approach. Using disinfectant wipes is pretty easy. Get a wipe and wipe the surface or area you want to get disinfected. This can be either tables, tabletops, kitchen counters, and other types of surfaces that are non-porous. By this, cleaning your monitor screen with disinfectant wipes is a possibility.
One of the good things about disinfectant wipes is that they are highly available and come in various forms and thicknesses, allowing you to pick and choose the best type of wipes for your specific needs.
Before Cleaning Your Computer Screen
Before you start, you should learn a few important reminders before cleaning your precious computer screen, and we’ll go about a few subjects to discuss to avoid damaging your monitor, which should be costly if it happened.
When cleaning your computer screen, it is best to avoid corrosive substances that may damage your computer’s screen. This comes in the form of ammonia or alcohol-based cleaning solutions. This cleaning solution has a bigger chance of damaging your computer screen rather than cleaning it. And this is because these strong chemicals can damage the anti-reflective coatings present on the monitor’s screen.
Second, be wary of what type of wipes or clothes you are going to use. Simple cloths may be the best option you have, but they are quite abrasive materials capable of scratching your screen on a microscopic level. The same can be said about shirts and other types of household rags, as they can harbor different kinds of dust, dirt, sand that can potentially scratch the surface of your monitor’s screen.
Lastly, it would be wise not to spray cleaning solutions or water directly to the monitor screen. Excessive liquids have the potential of being stagnant in parts of the monitor that may lead to a short circuit rendering your monitor useless. Water can wreak havoc on sensitive parts of the monitor. Rather than taking your chances, it is better not to try it at all.
To learn the basic steps on how you can use disinfectant wipes on computer screens, read on.
How to Clean Your Computer Screen
There are a lot of ways on how you can clean your monitor screen. And luckily for you, you will be delighted to be an abundance of options.
- To prevent further damage, turn off the power of your monitor screen or the entire computer. And this is because wiping with minimal force can cause pixel damage to your screen.
- Get your clean and dry microfiber cloth. Microfiber cloth is one of the best options when cleaning your computer screen as it can easily gather spec of dust, sand, and other dirt. Plus, microfiber cloths are non-abrasive and are gentle to your monitor screen.
- Sweep gently through the areas of the monitor screen. Ensure you are wiping in a smooth motion with a little amount of pressure applied. It should be enough to lift or wipe away spec of dust, sand, and other dirt.
Although some monitor manufacturers do not allow the use of disinfectant wipes for your screen, certain wipes have gentle and safe ingredients to work with. Can you use disinfectant wipes for the monitor screen? Yes, partly. In doing so, here are the steps:
- Let the monitor screen dry off before cleaning it with wipes. This is to prevent any electrical shocks and short circuits from occurring within your monitor.
- To prevent further damage, turn off the power of your monitor screen or the entire computer. And this is because wiping with minimal force can cause pixel damage to your screen.
- Get your disinfectant wipes are carefully and slowly run through the screen in a smooth and gentle motion. Ensure every spot is thoroughly wiped.
Have you ever wonder, why the technician recommends using Lint Free Cloth to clean your TV and monitor screen? In this post, we are going to cover all the details related to lint free cloth.
So, without any further delay, let’s start.
What is a Lint Free Cloth for Computer?
Lint free cloth meaning is that it is a special type of cloth that is used to clean different electrical components of the computer, glass, digital cameras, TV, the picture glass, and even stainless steel without giving any scratches or leaving debris over the surface.
While talking about its composition, most of the lint free cloth is either made form 100% polyester or a mixture of polyester and nylon.
Moreover, these special lint-free clothes are explicitly used to clean electrical components because they don’t produce any electric charge over the surface (also called ESD) while rubbing. That’s why they are very popular for cleaning electrical components. In some cases, lint free cloth is also called as an anti-static microfiber cloth.
Note: ESD (Electrostatic Discharge) is the production of static electricity when two differently-charged objects are in contact. This results in static electricity build-up which might cause damage to electric sensitive devices.
In the market, lint-free cloth is available in multicolor and you can easily buy through online retailers such as Amazon or from any local electronic store.
In our next section, you will get to know about how you can easily clean your electric appliances with a lint-free microfiber cloth.
What is the Use of Lint Free Cloth?
The Lint Free Cloth uses in computer uses are as Follows:
A lint-free cloth is one that doesn’t shed fluff when used to clean.
It is less likely to build up a charge, which can produce ESD, which can damage electronic equipment, such as HD televisions, computer displays and digital cameras, when the cloth is clear of lint.
How to Properly Clean a TV Screen Using Lint Free Cloth
By following these simple steps, you can properly clean your flat TV screen (LED, LCD, OLED, or plasma TV screen and monitors, or other sensitive glasses.
Step 1: Turn off your TV and unplug it and give a few minutes to cool down.
Step 2: Use a soft, dry lint-free microfiber cloth to clean the screen. Gently wipe the screen by using an anti-static microfiber cloth in a circular motion to clean off any dust and debris.
Step 3: For hard-to-remove stains. Moisture your dry an anti-static microfiber cloth with distilled water.
Step 4: If you fail to clean the stain you can use mild dish soap or cleaning solution.
Step 5: Wipe the flat TV (LED, LCD, OLED, or plasma TV) screen again with a dry lint free cloth.
How to Clean a Tube TV Screen?
The following are the simple steps to clean your older CRTV or tube TV using Lint Free Cloth:
Step 1: Turn off and unplug the CRTV or tube TV before using a lint-free cloth for cleaning.
Step 2: Now, gently wipe the TV screen with a soft lint free microfiber cleaning cloth to remove dust.
Step 3: Moisture the cloth to remove the hard stain with a 50/50 mixture of rubbing alcohol and water.
Step 4: Wipe your CRTV or tube TV screen again with a dry cloth, to collect the remaining residue.
Point To Be Noted
Here are some precautions that you should follow while using lint free or other microfiber cloth while doing the cleaning. This also includes the precaution related to the cleaning solution.
- Always unplug the electrical device when you do cleaning.
- Do not apply any type of cleaning solution directly onto the screen because it may damages the electronics.
- Do not use harsh cleaning products such as benzene, ammonia, alcohol, acetone, etc. because they can react with the screen coated materials and result in permanently discoloring of the screen.
- Please check your manual before using a liquid cleaner on electronics.
- The cleaning solution should be kept away from the reach of children.
- In case of contact of cleaning solution with the eye, rinse your eyes immediately with cold water.
Examples of Lint Free Cloth
When used, a lint free cloth used in computer leaves no fluff behind on surfaces it cleans.
Electrostatic dissipation (ESD) can damage high-definition televisions (HDTVs), computers (monitors), and digital cameras if the fabric is lint-free.
These are the lint free examples.
What can I use as a Lint Free Cloth?
If you use fabric softener, you’ll have to buy new microfiber cloths sooner rather than later because the cloths lose their absorbency after a few washes (particularly if you use fabric softener). Consider using a cotton diaper insert instead, which is as soft and adaptable as a synthetic one.
What is a Anti Static microfiber cloth?
Microfiber cloth is the best example of lint free cloth which is commonly used for cleaning electronic appliances without scratching them. These type of clothes has a higher absorbent capability and can hold water up to seven-time to its weight.
What can you clean with a lint free cloth?
You can clean almost all the appliances with lint free cloth. Generally, high-quality lint free cloth is designed to protect the appliances from an electrifying attribute such as ESD. Moreover, it is commonly used to clean electrical appliances such as glass, digital camera lens, TV, monitor, etc.
Can you wash lint-free cloth?
Yes, you can wash lint free microfiber cloth after your cleaning work is done. You can either wash them in the washing machine or use your hands. Don’t use any detergent, soap, fabric softener, or soap liquid while cleaning them.
How to Use Lint Free Cloth?
Step 1: Lather the stained areas with the stain bar.
Step 2: Hot water should be used to wash cotton and other hard fibres, while warm water should be used for wool and silk.
Step 3: Wipe away the stains and residues using a lint-free cloth that has been dampened.
Step 4: Until all the soap and stains have been gone, keep repeating the procedure.
Take a look at your laptop. Is it covered in dust? Small scraps of hair? Maybe a stray crumb rests inside an awkwardly placed molding.
If your laptop is now a crumb catcher because you busily eat lunch over it, maybe it’s time to give it a good cleaning.
What you need
- Microfiber cloth: Any microfiber cloth will do, but if you don’t have any freebies that came with eyeglasses, TVs, monitors, or laptops, we like these MagicFiber ones. For most people, this is the only thing you’ll need.
- Compressed air(optional): If you can open your laptop and remove the bottom panel (that’s a big if), then compressed air is useful for blowing dust out from the fans. Any compressed air will do—we’ve used Falcon Dust-Off.
- Screwdriver (optional): If you can open your laptop, you’ll generally need tools to do so, and if you’re lucky, you can remove the bottom of the laptop with a Phillips head screwdriver. If your laptop has Torx (the screw that looks like a star) or other speciality screws, you may need a precision toolkit.
- Cotton swabs and 70% isopropyl alcohol (optional): Any brand of cotton swabs and isopropyl alcohol will do.
How long will this take to clean?
Cleaning the outside of your laptop takes less than five minutes. If you need to open up the laptop to access the inside, it’ll take about 15 minutes.
How to give your laptop a quick clean
Power down the laptop, unplug it, and remove the battery if you can.
Wipe down your whole laptop with a dry microfiber cloth. This will pick up the majority of dust and light scuffs. If there’s stubborn dust, hair, or leftovers crammed between any keys or design embellishments, give the keyboard deck a series of short blasts of canned air to remove it (don’t hold down the canned air’s nozzle because this creates condensation). Proceed with caution—this step can blow debris deeper into the laptop. Even so, it’s the best solution we’ve found, and even Apple recommends it.
If you spilled something on your laptop, or the keys and trackpad look reflective with finger grease, it’s time to do a deeper clean. Lightly dampen the microfiber cloth with a small amount of water and give the laptop case another wipedown. Don’t forget the trackpad, but be careful not to press down too hard when cleaning it. And don’t ever spray or pour water directly onto the laptop.
For stubborn stains, grab a cotton swab, dip the swab into isopropyl alcohol, and then use the swab to focus on any trouble spots. This is acceptable only for certain materials, typically harder, nonporous plastics (including the keyboard on MacBooks), so do a spot check first to make sure the alcohol doesn’t cause any issues. You should not use isopropyl alcohol on softer plastics, like the material often found on some palm rests, and it may cause issues with some key materials, so always try water first to see if it’ll suffice.
How to remove sticker residue
Start with a little water on a microfiber cloth to see if that’s enough to remove the residue. If it doesn’t work, experiment with a small amount of isopropyl alcohol.
If the alcohol doesn’t work, a product like Goo Gone might prove useful as a last resort, though we’ve always found that isopropyl alcohol works with most stickers. Goo Gone has the same cautions for nonporous plastics and can stain some surfaces.
How to get rid of screen smudges
To clean the screen, we’ll return to our old friend, the microfiber cloth. For glass screens that have fingerprints, take a dry microfiber cloth and wipe the screen down with a little pressure. If the screen isn’t glass, use a light touch to gently wipe away any dust.
If the screen has more-stubborn residue, like sneeze drops or soda spots, dampen the cloth with water and wipe the screen again. Don’t ever spray water directly onto the screen. In our experience, special screen-cleaning sprays aren’t useful.
How to clear dust out of the inside of a laptop
Depending on the type of laptop you own, you may be able to remove the bottom panel and clear out dust in the fans. This isn’t an issue with every laptop, but if you’ve noticed the fans on your computer kicking on more than usual or that they’re making strange sounds, then it’s worth cleaning.
Power off your computer, and then remove the bottom panel. This requires a screwdriver, often one with a special bit for electronics. Remember where you remove each screw from—some laptops use different-length screws for different parts of the chassis.
Once you have access to the bottom of the laptop, use short bursts of canned air to blow dust out of the laptop. Do the same to the vents and fans, but hold the fan blade in place to prevent it from spinning too fast. (If you can’t open the laptop, do not blow air into the fans, as doing so may make the problem worse.) Once the dust is cleared out, you can replace the bottom panel and screws.
By Hilda Scott published 26 March 20
How to clean your laptop screen and keyboard
Laptops are a breeding ground for germs but regular cleaning will keep your notebook free of bacteria while helping to prolong the life of the machine.
It has become especially important in recent weeks to frequently clean your laptop. Given the public health concerns over the ongoing pandemic, the Centers for Disease Control and Prevention (CDC) recommends disinfecting surfaces — your laptop included.
There are several methods out there, but the following instructions will give you the best way to safely clean and disinfect a laptop.
How to clean a laptop
Before you learn how to clean a laptop screen and keyboard safely, you’ll need these supplies:
- Soft, microfiber cleaning cloth
- Isopropyl rubbing alcohol or hand sanitizer
- 1 cup of warm water
- Compressed air can or rubber dust blower
- Disposable gloves (optional)
Step 1: Prepare your laptop for cleaning
Power off your laptop. Disconnect it from the wall outlet, if you have it plugged in. Remove the battery (if applicable) and any devices attached to it.
Step 2: Make your laptop cleaning solution
The best and safest way to clean a laptop is with a diluted alcohol and water cleaning solution. Alcohol not only disinfects but also kills viruses that live on surfaces.
To make your own laptop cleaning solution, pour 1 cup of warm water into a bowl. Next, add 8 to 10 capfuls of rubbing alcohol into the water. Now that your cleaning solution is ready, dip your cloth into the mixture to dampen it.
Wring out the cloth out to remove any excess water so it’s not dripping before you apply it to the laptop.
Step 3: Clean your laptop screen
Gently wipe the moistened cloth across your laptop’s lid, base, keyboard and screen. We recommend gently wiping the display in one direction while cleaning from the top of the bezel to the bottom.
Once your laptop is fully air-dried, you can buff out any remaining streaks using a dry microfiber cloth.
Step 4: Clean your laptop keyboard
The keyboard is the filthiest part of the laptop and needs extra cleaning attention. Gently wipe the laptop’s keyboard, touchpad and keys using a damp cleaning cloth.
When you’re done, use the compressed air can or rubber dust blower to remove crumbs, dust and debris from the crevices around each key. While you’re at it, consider cleaning dust from the laptop’s vents.
Before powering on your laptop for use, make sure it’s fully air-dried. Once everything is dry and sparkling clean, feel free to use your bacteria-free notebook.