How to keep rings from sliding

You and your beloved will stick together until the end, but your rings might not be quite so bonded. It’s intensely aggravating to have an engagement and wedding band that slip around constantly. Instead of fidgeting and twisting them back into place all day long, take a few minutes to figure out a lasting solution that will keep your wedding rings together for as long as you and your spouse are.

Use a Connector

A tiny piece of plastic could solve all your ring woes. Buy a flexible ring adjuster – a small spiral made of clear plastic – either online or from a jewelry store. This spiral is designed to fit around the band of a ring that’s too large in order to create a snug fit. Some types are flexible enough to wind around two bands. Hold the two bands together and work the spiral around the underside of both, effectively locking them together.

This method works best if both rings are slightly too large for your finger. If they’re tight already, attaching a plastic adjuster won’t work.

Make Each Ring Fit Snugly

Sometimes adjusting the fit of each ring is enough to keep them both from moving around. That’s especially important if one ring is a slightly larger size than the other. Get them both to fit snugly around the finger and they’ll both stay put all day, every day.

One way to do this is to get two plastic adjusters and wind one around each ring separately rather than banding them together, but having two adjusters might make your rings feel too bulky. Alternately, ask your jeweler to add a sizing band or sizing beads to a too-large ring. These are small attachments that go inside the band, giving it a slightly tighter fit without changing the way the band looks.

Tie Them Up

It’s a little low-tech and not a great long-term solution for keeping rings together, but in a pinch, a simple piece of string makes an effective temporary ring connector. Find string that approximately matches the color of the bands, fit the rings together and knot a short length of string around them. Cut off the excess and turn the string so the knot faces out, where it won’t rub against the skin. If the rings are still pulling apart, tie on a second section of string.

Consider Soldering

Having the rings soldered together is a permanent solution, so it’s not for everyone. Once the rings are fused together, they’ll never separate. That solves the problem but could be an issue later if, for example, you want to pass your engagement ring down to a daughter someday, or if you decide to simplify things by wearing just one ring at a time.

Soldering the rings is also the priciest way to keep them together. Fees vary depending on the type of rings and the complexity of the job. A local jeweler may charge as little as $30, or it may cost $100 or more.

How to keep rings from sliding

As Jewelry Shopping Guide editors, we write about things that we love and we think you’ll like too. We often have affiliate partnerships, and may generate some revenue from these links at no cost to you.

You’ve finally got that ring and you want to show it off to everyone. But then you notice that it keeps spinning! The ring becomes distracting and annoying and you’re continually thinking about keeping it pointing in the right direction.

A spinning engagement ring is a common problem. There are a few different reasons why this could be happening and fortunately, there are many easy ways to fix this problem.

In this quick guide, let’s take a look at the why your engagement ring might be spinning and what you can do to stop this.

Why Is My Engagement Ring Spinning?

There are a number of reasons that could be causing your ring to spin:

Reason #1 – Setting Isn’t Balanced

How to keep rings from sliding

A ring that isn’t balanced in weight will tend to spin. For example, if your ring has a large gemstone that’s heavier than the band, it’ll tend to tip to one side. This is simply gravity doing its work and no matter how many times you adjust it, it will continue to slip to the side.

To counter this from happening at all, the ring designer would ideally incorporate a wider or thicker base than the top of the ring. This would keep the ring from spinning by providing balance and a firmer hold onto the finger.

However, if your ring has a very thin base and is top heavy, then it’s chances of spinning are higher.

Reason #2 – Big Ring

Your ring could be a size or two too big for you. This is a simple reason and quite common. Buying the right ring size can be difficult for most people. Check to see if there’s a gap between your ring and your finger.

Reason #3 – Swelling Fingers

Just like feet, your fingers tend to swell during the day, changing about a half ring size over the course of the day. For some people, this change in finger size can be quite pronounced. For people with arthritis, swollen fingers and hands in the morning can be quite common due to the inflammation of the joints. This results in a ring that fits when the finger is swollen and becomes lose when the finger reduces size.

Reason #4 – Large Knuckles

This is probably the most common reason that many people find it so difficult to find a ring that fits right.

If you have small fingers and large knuckles, your ring will fit perfectly around your knuckle, but once it slips down below that, it becomes quite loose. If you design the ring to fit the finger, then you’ll have difficulty each time you try to put on and take off your ring, as it’ll get stuck around the knuckle.

When picking out your ring size, it’s important to take the size of the knuckle into consideration to avoid discomfort every time you put on and take off the ring.

Solutions to Stop Your Ring Spinning

Quick Fix –Tape, Plaster, String or Elastic Band

How to keep rings from sliding

If you want a quick fix, you can simply tie an elastic band, some string, a band aid or some sticky tape around your ring. This closes the gap between finger and ring and creates friction that stops the ring from moving too much.

Ensure that you change the tape or band aid you use frequently to avoid any potential hygiene issues.

Here’s a video that explains how to use sticky tape to stop your ring from moving around.

How to keep rings from sliding

If the size difference is not huge, the jeweler can add a couple of metal beads to the inside of the ring. These sit comfortably against your inner finger and keep the ring from moving too much. Ring sizer beads are still easy to take on and off and won’t affect your comfort.

An Expensive Fix – Hinged Shanks

This solution is not for everyone because it is the most expensive of all the solutions mentioned in this article. However, if you have a very large knuckle and tiny fingers, this is one of the best solutions for you.

How to keep rings from sliding

Beautiful example of hinged shank ring by Klines Jewelry, via Etsy.

A hinged shank ring looks like a normal ring, except that it has a tiny hinge affixed to the lower part of the ring, allowing you to open the ring, fit it around your finger and then to close it back again.

You can have a jeweler do this specially for you on an existing ring. While the bottom part of the ring will be replaced with the hinged shank, the top part of the ring will still look the same. However, it requires skill and expertise so check before you commit to a jeweler, especially if your ring is valuable.

This is an especially effective solution for those with arthritis. It’s called the Arthritic Shank and can be found on some specialist stores ready-made.

When deciding on the right solution for you, you’ll have to consider your budget and whether or not you want a permanent solution. Also remember that when you add a wedding ring to the same finger (in case you haven’t already) that will provide some support for your engagement ring too and may help to keep it from spinning.

Hey, lovelies! The latest question in our Ask Emmaline inbox is here: how to keep wedding ring from spinning or turning, something that can really get aggravating if you’ve had it happen to you. I know the feeling about the engagement ring spinning; it happened to be in the past, too! If your wedding ring spinning is driving you crazy, we found the solution.

But first, Ashleigh writes,

“Hi Emmaline Bride! I got engaged last week and my ring is just a pinch too big. It’s not noticeable enough to get it sized but it is honestly driving me crazy. Do you have any tips on how to keep my wedding ring from spinning? I don’t think it will fall off but it’s aggravating because it keeps turning especially when I’m working. Should I take it to a jeweler? Thanks in advance.”

How to keep rings from sliding

Hi, Ashleigh! Congratulations on your engagement! Your engagement ring spinning is certainly enough to drive anyone crazy, especially because you finally get to wear it and show it off to people. And now that you’re getting used to wearing it every day, it makes sense that you want to have a perfect fit.

Bring it to a jeweler and spend money?

How to keep rings from sliding

Try at-home remedies that probably won’t work?

Don’t Waste Money on Ring Spinning Solutions That Don’t Work

Well, we did a little research into this problem of turning wedding rings and we found dozens of wedding ring spinning “solutions” people tried that didn’t work. For instance, I read about a couple who took a wedding ring to a jeweler because her engagement ring was top-heavy and kept spinning. They put in a post on the ring to keep it from spinning (cost: $50!) but it tore at her skin, especially whenever she took it off. So they removed it (and were out fifty bucks).

The Cheap + Easy Fix for Spinning Ring

So they tried another solution: this! And it worked. We looked deeper into this engagement ring spinning fix and it’s the best way (and the #1 seller for this common problem) to keep your wedding ring from spinning… for under $8!

How to keep rings from sliding

How to keep rings from sliding

It is made with a high-quality PVC and designed for a variety of ring problems, including knuckle problems, top-heavy rings, and keeps your ring from spinning while staying snug against your skin. Plus, it comes with a few different sizes so you can choose the one that fits best. Your ring will finally fit, stop spinning, and stop pinching your skin. Win, win, and win! Get yours here.

This post contains affiliate links. If you use these links to buy something I may earn a commission. Thanks! As an Amazon Associate I also earn from qualifying purchases.

So many people have this problem.

Your Rings Tilt Sideways on your Fingers!

They never sit up right. They’re always Leaning over or Spinning around (like your Drunk Uncle Tom).

You’re constantly Straightening your Rings to the upright Position. Isn’t there a Cure for Spinning Rings? Can’t they make a Ring that sits Straight on your Finger?

It’s Because they’re Top Heavy!

Most Rings NEVER sit right. That’s because most Rings are Top Heavy. With all the major Weight on top holding your Gemstones and Diamonds, like Heads, Prongs and Stones, your Rings will just naturally fall to the side.

Plus, if you have a Skinny Finger where there is still room in between your Finger and the Ring, that’ll cause them to Spin also. Some People can’t get their Rings sized down to help the matter because they have Bigger Knuckles.

So what’s the Cure?

Gold Balls. Gold Beads. Sizing Balls. Sizing Beads. Lot’s of people call them different things, but they are all the same.

They are little Round Balls of Gold that they put on the inside of your Ring. Jeweler’s Solder these two Beads Permanently inside your Ring, one on each side of your finger where the Folds of your skin go. (See Picture) They rest on the bottom of the Shank and because your Finger’s Malleable, you’ll never know they’re there.

Women Love Them!

I always think that they would hurt, but I tell you, Women swear by them. They hold your Ring in place like they’re supposed to. The Beads catch your Skin and Stop your Rings from Spinning! Women say they have no problems with them. They say they’re very Comfortable and LOVE them.

Do Gold Balls Really Work?

YES! If you’re tired of having your Rings and Diamonds laying Sideways on your Finger, put these Beads into your Band and you’ll never have a Tipping Problem again

How to keep rings from sliding

There’s nothing more frustrating than having your curtain rod slide as you open and close your window treatment. Luckily, there are a few easy fixes for this issue! Explore this guide on how to keep your curtain rod from sliding to find the right solution for your needs.

Order custom curtains from Spiffy Spools online in any size. We have over 1,000 fabrics and patterns to choose from, so you can match them to your home perfectly.

What Kind of Curtain Rod do you Own?

There are different ways to prevent different types of curtain rods from sliding. Here are some tips for the two main types of rods that slide:

Tension Rod

Consider making the following adjustments to prevent your tension rod from sliding down:

  • Examine the window frame. The condition of your window frame may be contributing to your tension rod not having a solid grip, causing it to slide. Any debris, moisture, or cracks can affect the rod’s hold. Make sure to clean or fix any issues with your window frame.
  • Adjust your curtain heading. Some curtain headings don’t glide across curtain rods as easily as others. Any additional strain on a tension rod can easily cause it to slide or fall. When using curtains that you will open and close often, avoid heading options such as tie tops, tab tops, and rod pockets. Instead, opt for grommet tops and headings that can be hung by rings for gentle opening and closing.
  • Upgrade the rod. The reality is, tension rods are generally prone to sliding and falling. They can lose their tension after just a few months of use, making them less than ideal for frequently-used windows. If it works for your window, it may be better to upgrade to a rod that requires brackets.

Rod Supported by Brackets

Consider making the following adjustments to prevent your rod supported by brackets from sliding down:

  • Increase the length. Purchase a new rod that extends approximately three-inches outside of both brackets. Hang your final curtain ring or tab outside of each bracket on the additional portion of the rod. When you pull your curtains, they will “catch” on the bracket to prevent the rod from sliding.
  • Use a center bracket. Rods that are not properly supported or have their weight improperly dispersed can also cause sliding. If you notice that your curtain rod sags in the center, install a center bracket to hold it up. This will evenly distribute the weight of curtains on the rod, helping it to remain in place when opening and closing your curtains.
  • Change or tighten your brackets. Some brackets come with screws that are designed to hold your curtain rod in place. This feature is often overlooked during their initial installation! Look to see if your current brackets have this screw, and if they do, tighten it to secure your rod. If they don’t have the screws, consider purchasing new brackets that do.

More Tips to Prevent Curtain Rod Sliding

The following tips can be applied to both styles of rods noted above to stop them from sliding:

Assess the Weight of the Curtain Rod

When your curtain rod is significantly lighter than your curtain fabric, it’s a recipe for sliding. Heavy curtains can more easily pull a light curtain rod when you open and close them. Make sure that your curtain rod is durable and properly weighted compared to your curtains. If you make this switch, also ensure that your brackets can support the weight of your new rod.

Adjust Your Fabric

How to keep rings from sliding

Cayoosh Organized Sheer Curtains

How to keep rings from sliding

Texted Viola Linen Curtains

Alternatively, you can change your curtain fabric to a lighter option instead of opting for a heavier rod. Explore the various weights of different fabrics:

  • The lightest fabrics are sheer and linen.
  • The best mid-weight fabric is cotton.
  • The heaviest fabrics are velvet and silk.

Try This DIY Hack

This DIY hack is another great way to secure your curtain rod.

If you have a tension rod, take the following steps:

  • Purchase two double-sided command strips to get started.
  • Place the command strips on either side of the window frame where your tension rod will hang.
  • Hang the tension rod, ensuring that each end is flush with the command strip.
  • Enjoy your tension rod that will no longer slide or fall!

If you have a rod supported by brackets, take the following steps:

  • Purchase two double-sided command strips to get started.
  • Place the command strips within the curve of each bracket.
  • Hang your curtain rod, ensuring that it is centered correctly across the brackets.
  • Enjoy your curtain that will no longer slide!

Order Custom Curtains from Spiffy Spools

Now that you know how to keep your curtain rod from sliding, consider upgrading your window treatment with custom curtains from Spiffy Spools! We make it easy to create personalized window treatments that flawlessly match your style and specifications. Explore our site to find the perfect option for your space, and don’t hesitate to contact us with any questions!

Are you sick of having to get up from a comfortable position to push your sofa cushions back to their proper place? Do you find that the process of simply coming home and putting your feet up is interrupted by the need to constantly re-align your escaping cushions?

A sliding couch cushion can drive you up the wall. But have no fear, because there’s a solution! In fact, there are several, so let’s take a look at a range of tips and ideas to keep your couch cushions from sliding, so that you can get back to your favorite TV show in comfort.

How to Keep Couch Cushions From Sliding Off: 8 Methods

1 – Use a Rubber Carpet Underlay

This is the easiest and the cheapest solution of all, and also the one that’s the least invasive. Rubber underlay is non slip rubber lining that normally goes under carpets, but it’s also a quick and easy way to stop cushions sliding forward. These are easy to find: any store that sells carpet will also sell rolls of underlay, and a couple of pieces will cost you just pennies. Just slip it underneath the cushions or leather seats and you’re set – it’s a quick fix, but it works.

2 – Use a Rug Pad

A rug pad is similar to carpet underlay, except it is usually used under a rug on a hard floor to prevent the rug from slipping. The same grip that stops the rug sliding will help prevent your sliding cushions from disappearing from underneath you. As you’ll see below, there are specially designed rubber pads that are made for couches, but there’s no real need to pay for these if you have a spare rug pad or carpet underlay (above) to hand.

3 – Stop Sliding Cushions With a Shelf or Drawer Liner

You can try a rubber drawer liners. These are liners made from such fabrics as vinyl, soft plastic, or rubber and are another inexpensive solution that means you don’t need to attach anything to your cushion.

The best type of shelf liner is one that’s perforated to give more adhesion. You can easily cut the shelf liner to the size and shape you need, which should be slightly smaller than the cushion itself so it doesn’t poke out from underneath. The great thing is that this kind of material comes on a large roll, so it’s easily replaced if it becomes worn down after a period of wear.

4 – Use a Specialist Non Slip Mat For Couch Cushions

These specialist commercial solutions provide a similar function to our DIY solutions above, and like them they should work without needing to attach anything to the cushions themselves. Although these cost more, the advantage is they tend to be a bit more durable than the options above (which may not be made of such high quality materials) and some solutions come in specific sizes that will fit your couch without the need for modification.

One good options is the Gorilla Grip Couch Cushion Gripper pad (amazon) which comes in multiple different sizes to fit couches and armchairs. You might also want to try TEUVO non slip pads, which come in a roll which you can cut to whatever length you desire – although these do come with an adhesive to stick them to the seat cushions.

5 – Try Velcro Strips

One of the most foolproof ways to stop couch cushions from sliding is to use velcro strips underneath your seats. If you apply strips of velcro to the sofa itself, then the corresponding velcro to the underside of the couch cushion, you can keep the cushions secure on the sofa with very little movement, as the hook of one side catches the grip of the other and holds the cushion secure.

It’s not a choice that everyone will go for, because it involves attaching material directly to the cushions with adhesive. This could be a problem when it comes to cleaning the covers of your couch cushions. It also means that you’ll be unable to flip your couch cushion regularly, as there’ll be a velcro strip attached to it.

For ease of use, make sure you get velcro strips that have adhesive on the back, rather than those that require sewing on.

6 – Combine Non Slip Pad & Velcro Strips

The non slip mat might not fix the issue if the mat itself slides out from underneath the cushions. If this is the case, try a combination of the above solutions, by attaching a non slip pad to the couch with the use of a strip or two of velcro, and then placing the cushions on top.

This way, there’s no adhesive on the couch cushions themselves, but by using both velcro strips and non slip mats, you’ll be doubling up on your options and practically demanding that the cushions stay in place and refuse to move!

7 – The Hook and Ring Option

This idea is one that involves a little more work and also requires the ability to sew, but it’s very effective. If you’re feeling confident in your DIY skills, take the cushions off the sofa first, and then sew a piece of fabric to the seat. To that piece of fabric, attach a furniture ring. Then, sew another piece of fabric to the cushion, and to that piece, attach a blunt hook. Depending on your cushions, you may be able to use a sewing machine to achieve this, but you’ll need to sew the part that goes on the seat of the couch by hand.

By hooking your cushions onto the couch, you can anchor them in place and stop the couch cushions from sliding, but it’s a technique that involves sewing directly onto your upholstery, and so won’t work for sofas and couches made from leather. The solution is quite easily removable if you need to wash the covers – just take the hooks and rings off (you can leave the extra fabric attached to the seat and cushion on).

Important: make sure the hooks you use are blunt so that you do not damage a cushion or another part of your couch.

8 – How to Keep Couch Cushions From Sliding Using a Couch Cover

It might sound like overkill for the sake of some rogue couch cushions, but a couch cover could really keep your cushions in place. Couch covers come in all fabrics and designs, so you’re sure to find one that works for you.

A stretchy, slip-on couch cover that fits around your couch and is pulled tight with the use of drawstrings will hold your cushions to the couch without giving them room to move.

Couch covers aren’t only effective at preventing cushions from sliding, either, but they’re a great idea for keeping your whole couch protected from damage such as spills, stains, and regular wear and tear.

Conclusion

By now you’ll have plenty of information to consider, so you can decide on the best solution for sliding couch cushion problem.

The best advice we can give you is to start with the least invasive option first, and then work your way through each step at a time if you’re getting the desired result. So, first try to get hold of a non-slip mat and see if that works. If not, move up to the velcro method, then try a combination of the two before looking at other options.

Whichever one you choose, you’re sure to find that your sliding couch cushion is soon no longer an issue, as you show your cushions who’s boss!

We’ve all held on to a single, solitary earring in the hopes of finding its mate, or getting a match made. I want to share with you some of the tips and tricks I’ve learned from over a decade of experience in the jewelry industry on how to stop losing earrings, and what to do with the unmatched friends you’ve collected.

Check out my earring selections for surefire comfy earrings you won’t lose!

H ere’s a great reference picture for the different styles!

How to keep rings from sliding

First off, I recommend doing a little inspection of your earrings before putting them on. If it’s a hoop or a friction back and the catch seems a little loose, DON’T WEAR THEM! Take them in to your local, trusty jeweler and have them adjust the tension.

How you store your earrings is important! I recommend keeping a zippered jewelry pouch in your purse so you can safely store your earrings if you need to take them out when you aren’t at home.

How to keep rings from sliding

EXPERT TIP!

Put one stud through the friction back of another and they will be a packaged deal! I find that they don’t roll away as easily and it’s more difficult to lose them when they are bigger!

On the topic of screw backs… just don’t.

Personally, I think they’re painful to put in (like a cheese grater in my ear!) and I don’t have 10 minutes each day to spend twirling those things in and out!

You’re far more likely to lose them – I’ve sold so many more screw back replacements than friction backs. Typically, once you finally get the screw back earrings in, you live in them, never checking to see if they’re still in there nice and tight. They gradually unwind themselves requiring you to find a new back, which is more difficult than finding a friction back to match.

On the other hand, friction backs are great!

The back has good tension and towards the end of the earring post there is a channel cut so that the back won’t come off without a tug.

A basic hook style can be a good option.

You can just slip them on and you can easily hang them on a jewelry tree or cup when you aren’t wearing them. The problem I’ve come across is that most hook styles are round and, just like a wheel, they will roll right out of your ear.

There are many styles of hoops out there and I would say the most important thing is to be mindful of the tension. If the hoop opens too easily, you might need to get the tension adjusted. Personally, I can’t wear hoops if I have my hair down because I always end up yanking them out when I do a hair flip!

To avoid this, I came up with my own shape that sits comfortably in your ear and stays put! My earring backs come to a point at the top where it will sit in your ear lobe. It’s comfortable and stable.

How to keep rings from sliding

How to keep rings from sliding

You can always go with the trusty lever back earring, but I’ve found that it can often be distracting to many designs. They’re usually a little more expensive and difficult to put on. The spring locking back that flips up gives many people a feeling of security.

So what do you do with those lone, unmatched earring?

Well, you could certainly rock just the one earring, but it does take the right earring and style to pull this hot trend off. Sometimes you can have the earrings transformed into a pendant or find someone to make you a match, but it isn’t going to be easy, inexpensive, or look exactly the same.

There are options besides throwing them away – In the past, I’ve taken single earrings and cut them in half to make a set, turned it into a pendant, or even taken the stones out and used them in a custom pair of earrings that will not fall out.

Replacing a loose ring with a new one, especially if it is a wedding ring or a family heirloom, may not be the best solution. Look no further. Fashionhance has a collection of different types of ring guards or ring sizers to help you resize your favorite ring, and wear it without the fear of it slipping off your finger.

Replacing a loose ring with a new one, especially if it is a wedding ring or a family heirloom, may not be the best solution. Look no further. Fashionhance has a collection of different types of ring guards or ring sizers to help you resize your favorite ring, and wear it without the fear of it slipping off your finger.

A Visit to the Jeweler

When your valuable ring doesn’t fit on your finger, a visit to your jeweler for resizing it will save you the cost of purchasing a new one. The jeweler either compresses the ring with a mallet or cuts it and re-solders it. However, remember it will change the size of the ring permanently.

Rings are worn as a fashion accessory by both men and women. Some rings are worn occasionally, but some, like wedding rings, are worn as a sign of a longtime commitment. If it is a family heirloom, passed down from generation to generation, it holds great sentimental value besides its economic worth. You might want to wear such rings everyday just to relish the sense of value and belonging to your loved ones.

However, over a period of time, the metal band of your ring may wear thin due to the friction between the band and the skin. The chances of the ring slipping off your finger increases as it starts to loosen up and induces the fear in you of losing the precious ring.

A new ring cannot replace a priceless heirloom. A ring guard comes to your rescue to help make the ring fit your finger. Ring guards can be bought in stores or made at home. This is an inexpensive way to wear your thinning, favorite rings, thus increasing the lifespan of your diamond, gold, silver, or platinum rings. Following are the different types of ring guards.

Metal Ring Guard

Description: It is a metal strip with prongs to secure it to the ring. The guard is placed inside the ring, which rests on the underside of your hand. The prongs can be folded around the ring band with the help of flat-nose pliers used to secure the guard. To adjust the size, the guard can be tightened and loosened, accordingly, by moving the prongs closer and apart.

Color and size: They come in white and yellow gold and are available in small, medium, large, and jumbo sizes to fit your ring band size.

Metal Beads Ring Guard

Description: Rather than cutting the ring band for resizing, ask your jeweler to add metal beads to your ring band which can be soldered inside it.

Color and size: The size of the beads will determine the fit of your ring. The beads are easily removable. The color can be of your choice.

Liquid Solution Ring Guard

Description: A liquid silicon ring guard solution helps you adjust the fit according to the required size. The tubed solution can be applied on the inner side of the ring band and left to dry for 24 hours. If the ring still doesn’t fit, repeat the process. To remove the liquid guard, you just need to peel it off the ring.

Color and size: The liquid guard is semi-transparent that makes it almost invisible.

Crescent-shaped Plastic Ring Guard

Description: These plastic crescent-shaped guards are easy to use as you just have to place the ring band in the guard. Place the slit of the guard in the center hole of the ring with the convex side, which faces the ring band. Push the ring band in the guard. Wearing the ring will secure the guard to the ring. The guard is removable with an easy peel of the guard from the ring.

Color and size: They are crescent-shaped and are usually available in colors which have a close resemblance to one’s skin tone; therefore, making them invisible.

Plastic/Rubber Tube Ring Guard

Description: Another inexpensive and simple way to resize your ring is to use a plastic or rubber ring guard. These guards are available in stores; however, you can make one at home using plastic or rubber tubes. Cut a bendable tube, roughly the length of half of the ring band. Slit one side of the tube from one end to another in length. Push the ring band through that slit to secure the guard on the ring. When you wear it, keep the open ends of the tube outwards. The pressure of your finger will desist the guard from sliding off.

Color and size: They are available in different colors and sizes of your choice.

String/Rubber Band Ring Guard

Description: The cheapest ring guard can be made using a string or a rubber band that you can find at home. Wrap a string or yarn around the ring band that usually hides under your fingers. If you want to use a rubber band, you first need to cut it at one end, and then, wrap it around the ring. After tying enough string or rubber band, tie a knot with the two ends of the string or rubber band to secure it.

Color and size: Colors can be of your choice and the size depends on an individual’s fingers.

If you covet your collection of rings which are a misfit now, you have Buzzle’s tips on ring guards at your disposal, to help you preserve and wear your prized possessions without having to shop around for a new ring. Now that you are efficient enough to make a ring guard, you can give your regular jeweler a run for his money. Women, this is one way of winning your spouses affection!