How to measure trampoline springs

Use the guide below to help you determine how to measure your current trampoline for replacement parts. If you are ordering a custom replacement jump bed, we will need these measurements to process your order. And if you have any questions, please contact us and we’ll be happy to help!

Replacement Trampoline Jump Beds

Round

A: Outside to outside diameter of frame. This is the typical stated measurement (i.e.: “14 foot trampoline”)
B: Jump bed fabric diameter. (Do not include the v-rings)
C: Total spring count. (Count the holes in the frame where the springs attach.)
D: Spring length. (Measure the total length of spring, end-of-hook to end-of-hook, with the spring REMOVED from the trampoline.)
How to measure trampoline springs

Rectangle

A: Length of bed, not including the v-rings.
B: Width of bed, not including the v-rings.
C: Spring count along length of bed.
D: Spring count along width of bed.

Octagonal

A: Measure width of bed, not including the v-rings. (Measure with the weave, not on the bias)
B: Spring count per side.
C: Spring length. (Measure total length, end-of-hook to end-of-hook, with the spring
REMOVED from the trampoline.)

Replacement Trampoline Frame Pads

Round

A: Measure diameter of frame, outside to outside.

Rectangle

A: Measure width of frame, outside to outside.
B: Measure length of frame, outside to outside.
C. Measure from outside of frame to edge of bed.

Octagonal

A: Measure width of frame, outside to outside.
B: Measure length of one flat side, center of corner to center of corner.
C: Repeat B on a different side.

Replacement Trampoline Springs

Measure the trampoline spring AFTER removal from the trampoline from end of one hook to the end of the opposite hook.

When we purchase a new trampoline for our backyard, we rarely consider the fact that it will most likely need maintenance and potentially repair at some point. It’s highly probable that some springs will need replacing, especially if you’ve enjoyed many hours of happy bouncing. You may think that this needs the expert eye of a professional, but this couldn’t be further from the truth. In fact, it’s perfectly possible to replace springs on your trampoline yourself without breaking too much of a sweat.

All you need is a little know-how. So, how is it done? Well, you’ll need to know how to measure trampoline springs. Once you know your trampoline sizes, you can use our handy guide to help you. This article is crammed full of tips and information, so you can finish the job with confidence.

How to measure trampoline springs

Before you think about replacing your trampoline springs, you’ll need to establish the correct size. It is absolutely vital to use the correct size for your trampoline model in order for it to function properly and safely. Whilst this may sound like a no-brainer, there is a proper way to do this to make sure your measurements are spot on:

  • 1. Remove 3-4 springs from the trampoline. You will need to measure several to check your measurements are accurate. This can be done by unhooking them with pliers. There is a possibility of springs pinging off, so it’s not a bad idea to wear safety goggles and some gloves to protect from any sharp edges.
  • 2. Lay the spring flat. Of course, it should not be under any tension at the time when you measure. If the spring has been stretched out of shape, you’ll want to measure ones that are in good condition or your measurements will be too long.
  • ​ 3. Measure the length of your springs. This means measuring right from the end of one hook to the other.
  • 4. Turn your spring upright and, at the end, measure the diameter of the spring (from side to side of the circular end).

Trampoline spring sizes

There are several spring sizes available for trampolines, and as we have already mentioned it is very important to choose the correct one. Here are the most common sizes:

  • 5.5 inch trampoline springs
  • 6.5 inch trampoline springs
  • 7 inch trampoline springs
  • 10 inch trampoline springs

How to measure trampoline springs

Heavy duty trampoline springs

Nowadays, you can readily purchase heavy duty trampoline springs. We think these are a great option, as they will provide extra strength and therefore will need replacing less often. Also, these springs are made from galvanised steel. This is a big bonus as they will resist rust when they get wet during rainy weather. Finally, these springs will resist cracking, which is a real risk during a cold snap.

How to measure trampoline springs

How many springs are on a 12-foot trampoline?

There is some variation between models when it comes to the number of springs on a trampoline. However, most 12 foot models have 72 springs.

How many springs are on a 14 ft trampoline?

Usually, a 14 foot trampoline requires 96 springs.

How many springs are on a 15ft trampoline?

Like a 14 foot trampoline, a 15 footer most often has 96 springs.

Getting trampoline springs off

Before you can replace your trampoline springs, you’ll need to remove them. Luckily, this isn’t tricky to do. Here are our top tips:

  • 1. Ensure the jump mat isn’t under tension. While this may sound obvious, make sure your kids aren’t sitting on it while you work, or the job will be a nightmare!
  • 2. Protect yourself. Springs ping, and trampoline springs are no different! So, protective goggles are a great idea to guard against any mishaps if you have them. Also, trampoline springs can be rusty, rough, or have sharp edges. Thick protective gloves will protect your fingers from any nasty nicks or grazes.
  • 3. Now you’re ready to remove the springs, you have two options. First, you could use pliers to prise the spring hooks from the loops. While this is the most common method, it can be fiddly. Otherwise, you can use a special spring removing tool. This leads us nicely on to our next important point.

How to measure trampoline springs

Trampoline spring pull tool (t-hook)

Believe it or not, you can actually buy a tool specially designed to remove springs from your trampoline. For anyone who has ever spent hours trying to pry them off with pliers, this will be welcome news. In essence, these are T-shaped tools that can unhook the springs easily, and can also be used to help you reattach them. This can be a great time-saver, and is a worthwhile purchase for any trampoline owner. You can buy them from Amazon, or some specialist online retailers. Check trampoline spring tools latest prices on Amazon here >>

How to measure trampoline springs

Trampoline replacement springs

Some trampoline manufacturers now helpfully include a few spare springs with your purchase. If not, you’ll need to buy replacement springs. In fact, we suggest investing in a few when you first buy your trampoline. Spare springs aren’t that expensive, and it means that if you break a spring you won’t have to wait to have new ones delivered before using your trampoline again.

How to measure trampoline springs

Where can I find trampoline springs for sale?

If you’re worried that replacement springs will be difficult to track down, never fear. There are a wide variety available for purchase on Amazon in ever size you could possibly need.

In conclusion

Hopefully, you now know all about trampoline spring sizes, how to measure trampoline springs and how to replace them. As you can see, this is not a difficult process and is a vital part of overall trampoline maintenance. Please remember to never, ever use a spring that has not been specially designed for use on a trampoline. While this may seem tempting if you don’t have a proper one to hand, other types of springs are simply not designed to support body weight and will not be safe to use. Also, they won’t provide that perfect bounce that a real trampoline spring offers. Now you know how to carry out this simple repair for yourself, you can look forward to many years of happy bouncing ahead of you. Click here to check trampoline springs latest prices.

How to measure your round trampoline:

When it comes to measuring a round trampoline there are several measurements you need to ensure you get the correct size parts. This page is designed to help you get the right measurements and ensure that you are ordering the right trampoline part.

How to Order the Correct Parts for a Round Trampoline:

For Round Mats (Jumping Surface): In order to get you the correct mat, you will need to know:
1) Frame diameter size (measured from outside edge of metal frame across to opposite outside edge)
2) Spring Count
3) Spring length (measure spring OFF of the trampoline, un-stretched, hook end to hook end)

**With these measurements you should be able to find the mat you need using our website. Simply click on “Trampoline Mats”, then narrow your search by shape, then frame size, then spring count, then spring size.

For Round Safety Pads (Spring Covers): In order to get you the correct pad, you will need to know:
1) Frame diameter size (measured from outside edge of metal frame across to opposite outside edge)
2) Measure the width of your old pad

**With these measurements you should be able to find the safety pad you need using our website. Simply click on “Trampoline Safety Pads”, then narrow our search by shape and then frame size. You can then optionally narrow your search by pad durability and/or preferred color.

(Tips: Usually the frame is close to an even foot amount (8ft, 10ft, 12ft, etc) so as long as it is within 2 inches you should be alright, for example, a trampoline that measures 12ft 10in would be able to use a 13ft Safety Pad.
Also, some trampoline models require a pad that has cutouts/slots for enclosure poles. If your trampoline requires a pad with cutouts/slots for enclosure poles, you may want to simply search our website by your trampoline model number.)

For Replacement Enclosure Netting: In order to get you the correct replacement enclosure netting, you will need to know:
1) Frame diameter size (measured from outside edge of metal frame across to opposite outside edge)
2) Count how many poles or arches are on your trampoline enclosure.

**With this measurement and count you should be able to find the net you need using our website. Simply click on “Trampoline Nets”, then narrow your search by shape, then frame size, then number of poles or arches.

(Tip: Usually the frame is close to an even foot amount (8ft, 10ft, 12ft, etc) so as long as it is within 2 inches you should be alright, for example, a trampoline that measures 12ft 10in would be able to use a 13ft enclosure netting.)

For Enclosure Systems (that include netting, poles and hardware): In order to get you the correct enclosure system you will need to know:
1) Frame diameter size (measured from outside edge of metal frame across to opposite outside edge)
2) Inspect the legs of your trampoline. Enclosure systems need “U” shaped legs to attach to.

(Tip: Usually the frame is close to an even foot amount (8ft, 10ft, 12ft, etc) so as long as it is within 2 inches you should be alright, for example, a trampoline that measures 12ft 10in would be able to use a 13ft enclosure system.)

For Springs: In order to get you the correct springs, you will need to know:
1) Spring length (measure spring OFF of the trampoline, un-stretched, hook end to hook end)
2) Spring count (however many you need)

**With this measurement and count you should be able to find the springs you need using our website. Simply click on “Trampoline Springs”, then narrow your search by spring length.

How To Measure A Trampoline Spring Cover. (count the holes in the frame where the springs attach.) d: (see image) then measure the frame diameter again, but measure perpendicular to where you just measured.

How to measure trampoline springsSource : www.pinterest.com

6ft, 8ft, 10ft, 12ft, 14ft, 16ft. All pads have a 4 skirt that hangs over the frame, except octagon pads have no skirt.

Table of Contents

12 FT Trampoline Combo Bounce Jump Outdoor Trampoline For

Also a vailable in these sizes. Also, measure the height of the pole so you can understand how high the net will be.

12 trampoline safety net fits 4 straightcurved poles. (count the holes in the frame where the springs attach.) d:

16ft trampoline combo bounce jump safety enclosure net. (see image) then measure the frame diameter again, but measure perpendicular to where you just measured.

8ft round summit trampoline trampoline 8ft trampoline 8ft. 6ft, 8ft, 10ft, 12ft, 14ft, 16ft.

9×14 oval trampoline with enclosure fern oval. All pads have a 4 skirt that hangs over the frame, except octagon pads have no skirt.

Blue safety round spring pad replacement cover for 15. Also a vailable in these sizes.

Easy 1200 upgrade project for the trampoline rainbow. Also, measure the height of the pole so you can understand how high the net will be.

Exterior cool 12 trampoline with enclosure walmart from. Check the inner diameter of your old pad:

Exterior extraordinary square competition trampoline from. Check the quantity of springs that your trampoline has.

Jump power trampoline tent sizes available 14ft. Comes with ties to easily attach to the trampoline frame.

Jumpking brand 13 ft frame size standard grade green. Confirm the outer diameter of the frame:

Jumpking 10ft jumppod deluxe trampoline with enclosure. Confirm the outer diameter of the frame:

Jumpking 12ft jumppod deluxe trampoline with enclosure. Count the number of the springs.

How To Measure A Trampoline Spring Cover

Confirm the outer diameter of the frame:Count the number of the springs.Durable pe cover to keep off debris and dirt on the jump
mat and spring cover.Find your trampoline’s diameter by measuring from one side of your frame’s outer edge to the opposite outer edge.

First thing you will do is measure your springs.For the round trampoline, measure the frame diameter.How to choose correct size safety pad for your original trampoline?How to choose correct size safety pad for your original trampoline?

How to measure an oval trampoline.How to measure up round trampoline.I have a round trampoline.If you have other shapes of the trampoline, measure the circumference of the trampoline frame instead of the diameter.

In order to avoid getting more noodles than necessary, we should first measure the length of the trampoline’s springs.In order to make our own spring cover out of pool noodles, we’ll want to get a whole bunch of noodles.In order to measure spring length, you have to remove one or more springs from your trampoline.Make sure the spring is not stretched when you are measuring its length.

Measure diameter of the frame from one outside end to the other;Measure from outside of frame to the outside of the frame to see which spring cover you’ll need.Measure from outside of frame to the outside of the frame to see which spring cover you’ll need.Measure from the outside of the frame to the outside of the frame to see which size jump mat you’ll need.

Measure from the outside of the frame to the outside of the frame to see which size jump mat you’ll need.Measure from the outside of the frame to the outside of the frame to see which size jump mat you’ll need.Measure poles number and height as usual.Measure straight across to the opposite side, to the outer metal edge of the trampoline.

Measure the overall length of the springs.Measure the trampoline straight across from one side to another.Measure when the pad is fully assembled;Measure your frame and advise the correct size, then you could get correct pads.

Measure your metal frame, from outside to outside, across the middle.Measure your trampoline’s steel frame.Next, find out the number of poles on the enclosure.Now repeat step 1 for the larger side again concentrating on the greatest width.

Pads are sold by frame size.Please measure outer diameter of the frame from one end to the other;Round, rectangle, square, oval, octagon.Scroll down on the left to narrow your search.

Some springs have longer hooks, so if you only cut to the coiled section, your protective piece can.Spring cover made from pvc containing thick 14mm foam.Starting from the shorter side, measure it from its greatest width.The diameter of the trampoline frame will need to be measured, which means from one side of the trampoline frame straight across to the other side.

The final price will of course depend on the quantity and quality of.The inner diameter of your safety cover when it is fully assembled ;.The spring safety pads are sold by frame sizes.The trampoline spring pad could be customized with different sizes and colors.

This is the typical stated measurement (i.e.:This page is designed to help you get the right measurements and ensure that you are ordering the right part.To find the diameter of your round trampoline, start at the outer metal edge of the trampoline.To properly measure an oval trampoline, you should measure the two sides (shorter and larger) at their greatest widths.

Trampoline spring sizes there are several spring sizes available for trampolines, and as we have already mentioned it is very important to choose the correct one.Trampoline springs can be bought individually or in packs with prices ranging from about $1 per spring to about $60 for a pack of 48.Turn your spring upright and, at the end, measure the diameter of the spring (from side to side of the circular end).We can then divide the length of the pool noodle with the number of springs.

How To Measure A Trampoline Spring Cover. (count the holes in the frame where the springs attach.) d: (see image) then measure the frame diameter again, but measure perpendicular to where you just measured.

How to measure trampoline springs

Source : www.pinterest.com

6ft, 8ft, 10ft, 12ft, 14ft, 16ft. All pads have a 4 skirt that hangs over the frame, except octagon pads have no skirt.

Table of Contents

12 FT Trampoline Combo Bounce Jump Outdoor Trampoline For

Also a vailable in these sizes. Also, measure the height of the pole so you can understand how high the net will be.

12 trampoline safety net fits 4 straightcurved poles. (count the holes in the frame where the springs attach.) d:

16ft trampoline combo bounce jump safety enclosure net. (see image) then measure the frame diameter again, but measure perpendicular to where you just measured.

8ft round summit trampoline trampoline 8ft trampoline 8ft. 6ft, 8ft, 10ft, 12ft, 14ft, 16ft.

9×14 oval trampoline with enclosure fern oval. All pads have a 4 skirt that hangs over the frame, except octagon pads have no skirt.

Blue safety round spring pad replacement cover for 15. Also a vailable in these sizes.

Easy 1200 upgrade project for the trampoline rainbow. Also, measure the height of the pole so you can understand how high the net will be.

Exterior cool 12 trampoline with enclosure walmart from. Check the inner diameter of your old pad:

Exterior extraordinary square competition trampoline from. Check the quantity of springs that your trampoline has.

Jump power trampoline tent sizes available 14ft. Comes with ties to easily attach to the trampoline frame.

Jumpking brand 13 ft frame size standard grade green. Confirm the outer diameter of the frame:

Jumpking 10ft jumppod deluxe trampoline with enclosure. Confirm the outer diameter of the frame:

Jumpking 12ft jumppod deluxe trampoline with enclosure. Count the number of the springs.

How To Measure A Trampoline Spring Cover

Confirm the outer diameter of the frame:Count the number of the springs.Durable pe cover to keep off debris and dirt on the jump
mat and spring cover.Find your trampoline’s diameter by measuring from one side of your frame’s outer edge to the opposite outer edge.

First thing you will do is measure your springs.For the round trampoline, measure the frame diameter.How to choose correct size safety pad for your original trampoline?How to choose correct size safety pad for your original trampoline?

How to measure an oval trampoline.How to measure up round trampoline.I have a round trampoline.If you have other shapes of the trampoline, measure the circumference of the trampoline frame instead of the diameter.

In order to avoid getting more noodles than necessary, we should first measure the length of the trampoline’s springs.In order to make our own spring cover out of pool noodles, we’ll want to get a whole bunch of noodles.In order to measure spring length, you have to remove one or more springs from your trampoline.Make sure the spring is not stretched when you are measuring its length.

Measure diameter of the frame from one outside end to the other;Measure from outside of frame to the outside of the frame to see which spring cover you’ll need.Measure from outside of frame to the outside of the frame to see which spring cover you’ll need.Measure from the outside of the frame to the outside of the frame to see which size jump mat you’ll need.

Measure from the outside of the frame to the outside of the frame to see which size jump mat you’ll need.Measure from the outside of the frame to the outside of the frame to see which size jump mat you’ll need.Measure poles number and height as usual.Measure straight across to the opposite side, to the outer metal edge of the trampoline.

Measure the overall length of the springs.Measure the trampoline straight across from one side to another.Measure when the pad is fully assembled;Measure your frame and advise the correct size, then you could get correct pads.

Measure your metal frame, from outside to outside, across the middle.Measure your trampoline’s steel frame.Next, find out the number of poles on the enclosure.Now repeat step 1 for the larger side again concentrating on the greatest width.

Pads are sold by frame size.Please measure outer diameter of the frame from one end to the other;Round, rectangle, square, oval, octagon.Scroll down on the left to narrow your search.

Some springs have longer hooks, so if you only cut to the coiled section, your protective piece can.Spring cover made from pvc containing thick 14mm foam.Starting from the shorter side, measure it from its greatest width.The diameter of the trampoline frame will need to be measured, which means from one side of the trampoline frame straight across to the other side.

The final price will of course depend on the quantity and quality of.The inner diameter of your safety cover when it is fully assembled ;.The spring safety pads are sold by frame sizes.The trampoline spring pad could be customized with different sizes and colors.

This is the typical stated measurement (i.e.:This page is designed to help you get the right measurements and ensure that you are ordering the right part.To find the diameter of your round trampoline, start at the outer metal edge of the trampoline.To properly measure an oval trampoline, you should measure the two sides (shorter and larger) at their greatest widths.

Trampoline spring sizes there are several spring sizes available for trampolines, and as we have already mentioned it is very important to choose the correct one.Trampoline springs can be bought individually or in packs with prices ranging from about $1 per spring to about $60 for a pack of 48.Turn your spring upright and, at the end, measure the diameter of the spring (from side to side of the circular end).We can then divide the length of the pool noodle with the number of springs.

How to measure trampoline springs

How to measure trampoline springs

How to measure trampoline springs

How to measure trampoline springs

Step 1) Detach 1 spring off from the trampoline so it can be relaxed
and measure from hook-to-hook like the picture below.

Also a vailable in these sizes.

Will Fit all the following Brands of Trampolines that require 5 1/2 " Springs: Parkside, Orbounder, Lifestyles USA, Jump Pro, Jumpsport, Pro Jump, Skywalker, Airzone, Variflex, Fun Spot, JumpKing, Hedstrom, NBF, Sky Bouncer, Bazoongi, Bollinger, Supertramp, Leisure Kingdom, Bravo Sports, Propel, JumpZone, Leisure Bouncer, American, Sky Bouncer, Sundance, Euro Active, Sportspower, Bounce Pro, High Jump, Walmart, Kmart, Dicks Sporting Goods, Academy Sports, Sports Authority, Sams Club, Sears, Toys R Us, Menards, BJ’s, Modell’s, Sports Chalet and all other brands of Trampolines.

Springs can be lost or stretched by misuse i.e. exceeding sensible weight limits. Let us replace them with quality OEM fully galvanized springs for strength and long life.

� Heavy Duty Galvanized
� Warranted for 2-year
� Will Fit ALL Brands of Trampolines

45 DAY MONEY BACK GUARANTEE – 2 Years Warranty from Defects

Authorized JumpKing Dealer

How to measure trampoline springs

Measuring your trampoline is very important to maintain its well-being, and keep you jumping for years to come. Over time there may be some aspects of your trampoline that start to break down due to general use and exposure to the elements. With proper measuring techniques and knowing a bit about your trampoline, you can order new parts easily. Keeping your jumpers safe is the number one goal.

Trampolining is very fun and is a great source of exercise. We want to make this experience as safe as possible so if your trampoline does not have a safety net then this is how you will measure to get the right one. Trampolines come in multiple different shapes and sizes, using different support legs and different size springs. Knowing how to measure a trampoline, and knowledge about your specific trampoline is paramount when searching for a net or replacement parts.

Table of Contents

Why Is Accurate Measurement Important?

Although trampolines are simple in nature they are far from it when it comes to design and construction. Due to their size and the fact that they must support the full weight of multiple people they are meticulously constructed to be safe and enjoyable. If you need any replacement parts for your trampoline then knowing the exact measurements of all the different parts is very important. This will help you order parts that may not be made by the same company that made your trampoline. Measurements are universal amongst all trampoline companies: whether you’re measuring the diameter, legs, springs or trampoline mat, if you do it correctly all the companies will be able to efficiently help you.

Getting the correct fit is crucial to everyone’s safety to ensure that everyone can enjoy themselves and avoid injury.

Different Shapes

There are 3 common trampoline shapes that you will find in the store, which you can see here. These are the most efficient and easy to take care of.

Round Trampolines

Round trampolines are the most popular. They provide the most predictable bounce when you’re on them and they can easily fit in any space. There are no sharp corners so they are safe for kids.

To measure the diameter of a round trampoline you must start from the outside edge of the trampoline frame. The measurements will include the length of the springs as well as the jumping surface.

Take one measurement of the diameter and then a second measurement that is perpendicular to the first one. The average of the two numbers will give you an exact figure for the frame diameter of the metal frame. This is the number used to classify all trampolines.

Rectangular Trampolines

A rectangular trampoline is most commonly seen in gyms. This is what professionals and aspiring Olympic athletes use to train and compete on. To properly measure a rectangular trampoline there must be two different measurements taken. The first will be the length which is measured on the long side from the outer metal edge to the opposite side. The second will be the width which is the shorter distance. It still should be measured from the outside edge in order to get the exact frame diameter.

It is recommended that you replace trampoline springs when they show the slightest amount of wear. If a spring was to break free when a person was jumping on the trampoline it could result in an injury of various degrees or death to the jumper.

Luckily, trampoline springs are inexpensive and easy to replace.

It has been found that hardware stores may have the same size springs but may not be of the same steel to ensure a long life as a trampoline spring. Be sure the springs that you do buy are specifically designed for use on a trampoline.

So let’s get started.

  • Replacement springs
  • Gloves
  • Trampoline Spring attachment tool – Or use a spring or some other device – screwdriver to assist you to leverage the spring into place.
  1. Determine how many trampoline springs you need to replace. Inspect the springs. You will need to immediately replace any springs that show a slight amount of wear to prevent injury to jumpers.
  2. Measure the trampoline springs to determine the size that you need.
  3. You will need the measurements as follows –
    • Measure the wire diameter, which you can measure from the hook, as it is just the width of the piece of metal.
    • Measure the outside diameter as the actual width of the whole coil.
    • Measure the length from hook to hook.
  4. Purchase replacement trampoline springs.
  5. You can easily replace the springs on your own but if there are some helpers available make good use of them! Have everyone distribute evenly around the trampoline. It is best to replace the springs that are opposite each other at the same time to keep the trampoline taut.
  6. We suggest you wear gloves to prevent injury from the springs. Use a trampoline spring tool to pull and hook the spring to the frame. Inspect all the springs to make sure you replaced them correctly. Ensure they are engaged correctly into the trampoline frame prior to anyone getting on the trampoline.