How to mix quikrete

QUIKRETE mortar mixes can be successfully mixed by hand or machine mixed depending on the size of your project.

Project Instructions

When working with mortar mixes, always wear eye protection and waterproof gloves.

Step 1
Measure the recommended water amount for the number of bags to be added to the mixer and pour half of the water into the mixer (an 80-pound bag of Mason Mix will require about 5 quarts of water). If using liquid cement color, add to the mixing water.

NOTE: add the water to the mixer before adding the dry mix.

Step 2
Add the dry mix into the mixer and allow the mortar to mix for about a minute, then add the remaining water as necessary.

Step 3
Continue to mix for 3-5 minutes, until a uniform, workable consistency is achieved.

Step 4
Let the mortar sit undisturbed for about 3-5 minutes to allow the fine aggregate in the mix to fully saturate

TIP: if additional water is needed, add small amounts of water sparingly.

Step 5
Test the consistency of the mortar by gently “snapping” the trowel downward to remove any excess mortar. The proper consistency is achieved when the wet mortar will “hang” on a trowel held at a 90° angle.

Shopping List

Mortar mixer
Or
Plastic mixing tub

  • 5-gallon bucket
  • Measuring Pail
  • Shovel
  • Mixing hoe
  • Gloves
  • Safety glasses
  • More From QUIKRETE ®

    How to mix quikrete

    QUIKRETE ® PRODUCTS

    – Technical Data
    – Application Instructor
    – Get more details

    How to mix quikrete

    CONCRETE CALCULATOR

    How much do you need?
    – Concrete Slabs
    – Masonry Walls
    – Set Posts
    – Seal Cracks and Joints

    How to mix quikrete

    NEWSLETTERS

    Subscribe now to get updates on products, offers and all things QUIKRETE ® !

    How to mix quikrete

    NEWSLETTERS

    Subscribe now to get updates on products, offers and all things QUIKRETE ® !

    How to mix quikrete

    MOBILE APP

    Free Download! With one-touch product and project information for homeowners and professionals.

    How to mix quikrete

    PROJECT PROFILES

    View commercial projects built on QUIKRETE ® products.

    QUIKRETE concrete mixes can be successfully mixed by hand or machine mixed. For smaller projects, hand mixing is often the best method.

    Project Instructions

    When working with cement-based products, always wear eye protection and waterproof gloves.

    Step 1
    Empty the mix into a mortar tub or wheelbarrow and form a depression in the middle of the mix.

    Step 2
    Measure the recommended water amount (each 80-pound bag of concrete mix will require about 3 quarts of water).

    Step 3
    Pour approximately 2/3 of the water into the depression. If using liquid cement color, add to the mixing water.

    Step 4
    Work the mix with a hoe, gradually adding water, until the mix reaches a uniform, workable consistency. Properly mixed concrete should look like thick oatmeal and should hold its shape when it is squeezed in a gloved hand.

    NOTE: the more water that is added to the mix the weaker it becomes; adding one extra quart of water per 80 lb bag can reduce the strength of the concrete by up to 40%.

    Shopping List

  • 10oz QUIKRETE Liquid Cement Color (optional)
  • Plastic mixing tub
  • Mixing hoe
  • Shovel
  • Measuring Pail
  • 5-gallon bucket
  • Wheelbarrow
  • Gloves
  • Safety glasses
  • More From QUIKRETE ®

    How to mix quikrete

    QUIKRETE ® PRODUCTS

    – Technical Data
    – Application Instructor
    – Get more details

    How to mix quikrete

    CONCRETE CALCULATOR

    How much do you need?
    – Concrete Slabs
    – Masonry Walls
    – Set Posts
    – Seal Cracks and Joints

    How to mix quikrete

    NEWSLETTERS

    Subscribe now to get updates on products, offers and all things QUIKRETE ® !

    How to mix quikrete

    NEWSLETTERS

    Subscribe now to get updates on products, offers and all things QUIKRETE ® !

    How to mix quikrete

    MOBILE APP

    Free Download! With one-touch product and project information for homeowners and professionals.

    How to mix quikrete

    PROJECT PROFILES

    View commercial projects built on QUIKRETE ® products.

    How to mix quikrete

    ­It seems like there’s always something wrong with the house. After winter melted away, the pathway out front had a ton of new cracks. Then, as spring progressed, the rain showers showed just how flood-prone the basement is. And no matter what time of year, the garage floor always looks dingy.

    Repairs can be costly. A dirty garage floor isn’t necessarily a big problem, but it can be frustrating. This is where Quikrete products come into play. Whether you’re repairing concrete structures or coating surfaces to maintain quality, Quikrete products can be a simple and inexpensive solution – they can make these household repairs can be a do-it-yourself process.

    Concrete is a mixture of cement, water and aggregate (like gravel or sand). It’s a popular building material because it’s inexpensive and its ingredients are so simple and abundant. Concrete is also moldable and comes in multiple colors, making it extremely versatile and appropriate for a wide range of projects. A final plus: Concrete is tough. It’s resistant to fire, rot, decay, extreme temperatures, wind, water and animal wear-down. The problem is, it’s tricky to work with and takes a great deal of time to fully dry [source: Materials Science and Technology]. That’s the advantage of Quikrete.

    ­Depending on the amount you use, quick-drying Quikrete concrete can set in as little as 10 minutes, although the common time for larger projects is between 20 and 40 minutes [source: Pavement Package]. You can buy it in small packages or bulk and then prepare, set and­ finish it all in one day. It relieves a lot of time and money stress associated with large home repairs — if you don’t want to rent a truck and heavy equipment or hire a contractor, Quikrete is for you.

    The next two pages will go into more of the specific details of how to mix and set Quikrete, and what options you have. Head over to the next page to start learning setting up your own concrete project.

    How to Mix Quikrete

    ­Normal concrete is tough to work with. Many concrete projects will deplete your expense account — you’ll have to rent a heavy-duty concrete mixing truck and all the other materials you’ll need. Then, if you can’t get the truck right up to the site where you’ll be laying the concrete, you’ll need additional transportation equipment and labor. Laying concrete isn’t that tricky, but it’s still often be­yond the do-it-yourselfer’s time and physical capabilities. You’ll usually have to hire a professional to do the job, adding yet another expense. Taking care of your concrete needs with Quikrete might save you money, time and effort.

    The general rule for achieving a good Quikrete texture is to use one part water for every five parts of mix. For the best results, it should have the consistency of modeling clay [source: Quikrete]. To get the right mix, you may need to experiment with the proportions, the way you would when trying to perfect your bowl of oatmeal. If the Quikrete is too thick, add small amounts of water slowly. If it’s too thin, add more Quikrete mix. When you’ve gotten the desired results, you can use a small garden shovel to do small touchups, or mold entire batches of Quikrete into large projects

    Head over to the next page to read about your Quikrete coating options.

    Mixing Quikrete is easier than mixing concrete, but it can be challenge. To simplify this process, John Shoemaker invented the Cretesheet, which is basically a tough, square piece of tarp plastic about 4 feet square (1.22 meters square), with plastic handles attached to all four corners. You place the Quikrete mix in the middle of the sheet, add the appropriate amount of water, and then you and a partner can simply move the handles up and down to mix the Quikrete. The sheet costs less than $20 and can take away a lot of the difficulties associated with stirring your concrete mix by hand [source: Burlingame].­

    ­Concrete should be treated to protect its surface. Adding a coating or a sealer over your finished cured concrete will help protect it from chipping and fading, as well as make it easier to clean. Apply the coat to the fully cured surface and your concrete will require less maintenance [source: My Garage Floor Coatings].

    Here are the Quikrete coating substances:­

    • Epoxy Garage Floor Coating — used primarily for coating garage floors, but also appropriate for any interior concrete surface
    • Epoxy Multi-Surface Coating — used to strengthen and seal interior concrete floors, but is also appropriate for outdoor surfaces such as walkways and patios
    • Premium Clear Epoxy Coating — best for interior surfaces but is also said to perform well in the garage
    • Epoxy Industrial Floor Coating — this heavy-duty product is best for surfaces like garage floors that see heavy traffic and harsh conditions
    • Anti-Skid Textured Coating — good for stairs and pool decks, this seal is meant to protect against skid marks in high-traffic areas [source: Quikrete Coatings]

    Beyond products with “coatings” in the name, there are several other products for sealing and finishing your concrete surfaces:

    • Basement & Concrete Floor Paint
    • Garage Floor Sealer
    • 1-Part Epoxy: Garage Floor Sealer
    • Multi-Surface Concrete Sealer
    • Natural Look Water-proofer
    • Wet Look High Gloss Sealer
    • Etching Stain High Gloss Sealer
    • High Gloss Sealer
    • Exposed Aggregate Sealer [source: Quikrete Coatings]

    Whether or not you decide to take your household repairs into your own hands, Quikrete may be the time- and cost-effective method you need. If you have further questions, head over to your local hardware store or big box chain, and you should be able to take a look at the variety of Quikrete products on the market.

    Cement, also referred to as “Portland cement,” was invented in England in 1824. It was named because of the striking resemblance it had to a stone found only on the Isle of Portland. Limestone, clay or shale was mixed with sand or iron ore and water to create a substance that continued to strengthen with time. Today, it is the most common building material in the world [source: Empfield].­

    How long does quikrete take to dry before rain? Calcium chloride causes the concrete to harden, or set, within 30 minutes or less of adding water to the mix. It can then take up to 4 days to cure and harden to its maximum strength.

    When you want to pour concrete and find yourself up against the pouring rain instead, what should you do? There are multiple reasons for pouring concrete in the rain, like being located in a consistently inclement climate, having a particularly wet winter or having to stick to a tight schedule. It’s a fact that professional concrete layers are capable of pouring concrete in the rain, so what steps do they take to ensure that concrete can be poured no matter how wet the forecast? Let’s find out. Never do these things when pouring concrete in the rain Never work large amounts of rainwater into the concrete mix as it cures, this will introduce contaminants into the mix. Check the weather forecast before pouring the concrete and prepare accordingly if you are pouring independently.

    What happens if it rains after concrete is poured? Heavy rain can cause problems to freshly poured concrete as it can wash out some of the cement from the mix. This can weaken the surface of the concrete, making it a softer consistency and decreasing the strength of the concrete.

    Can I drive on concrete after 3 days?

    Does concrete take 100 years to cure? Does concrete take 100 years to cure? No. Not on at least two basis points. Firstly, concrete only continues hardening for so long as the pore moisture value drops below a certain ill-defined value.

    How long does concrete need to dry before rain? If the concrete is still fresh (around 2-4 hours after pouring), it’s important to cover the surface to protect it. However, once the concrete has been finished (between 4-8 hours after pouring), and has set hard enough for walking on, the effects of rain should be minimal.

    Additional Questions

    How long does high strength concrete take to set?

    Curing Time for Concrete In standard industrial cases, full strength concrete is recognized at 28 days. At seven days, you should have concrete that is cured to 70% full strength or greater. But to answer the question of, “How long does concrete take to set?” concrete setting time is generally 24 to 48 hours.

    What happens if it rains on quikrete?

    While the rain will provide plenty of ground moisture, doing this project in the rain may introduce too much groundwater to the mix, weakening the finished product. The rain can also cause problems with the curing process of the concrete.

    How long does it take for quikrete high strength to set?

    How long does it take for concrete to cure completely?

    How long after it is poured is concrete safe from rain damage?

    If the concrete is still fresh (around 2-4 hours after pouring), it’s important to cover the surface to protect it. However, once the concrete has been finished (between 4-8 hours after pouring), and has set hard enough for walking on, the effects of rain should be minimal.

    What is the difference between quikrete and concrete?

    Basically concrete is stronger and more durable so it can be used for structural projects such as setting posts whereas mortar is used as a bonding agent for bricks, stones, etc. Concrete is a mixture of water, cement, sand just like mortar. One of the concretes we sell is the Quikrete Fast Setting Concrete Mix.

    How long after concrete is poured Can it rain?

    If the concrete is still fresh (around 2-4 hours after pouring), it’s important to cover the surface to protect it. However, once the concrete has been finished (between 4-8 hours after pouring), and has set hard enough for walking on, the effects of rain should be minimal.

    What happens if you drive on concrete too soon?

    If you drive, walk, or park on your new concrete any sooner than the recommended time, here’s what may happen: It may crack. You may leave tire tracks or footprints in the concrete, which could also ruin your shoes. The joints may break.

    How long does concrete need to dry before getting wet?

    Concrete setting & curing time Concrete can take 24 to 48 hours to set and around a week to partially cure. During this time, walking on the surface is allowed. However, due to the nature of concrete consistency, it is best to avoid heavy equipment during this period.

    How long does it take for quikrete to fully cure?

    The concrete sets up in 20 to 40 minutes, so you can quickly move on to the next stage of the project (a great convenience when setting fence posts) or backfill the hole to finish the job. Under normal curing conditions, you can apply heavy weight to the post (a basketball backboard, for example) after just 4 hours.

    What is the strongest concrete mix?

    In making concrete strong, these ingredients should usually be mixed in a ratio of 1:2:3:0.5 to achieve maximum strength. That is 1 part cement, 2 parts sand, 3 parts gravel, and 0.5 part water.

    How long does quikrete need to dry before rain?

    How long does quikrete take to dry before rain? Calcium chloride causes the concrete to harden, or set, within 30 minutes or less of adding water to the mix. It can then take up to 4 days to cure and harden to its maximum strength.

    Is rain good for concrete slab?

    Rain is a good thing..as long as it is not heavy rain in the first 24hrs (which can causes pitting little tiny surface dents). After around 24hrs, the top of the concrete will set and the slab will start to cure. Once it is curing, it is much better to be rained on then baked in hot sun.

    How long should concrete cure before putting weight on it?

    How long should concrete cure before putting weight on it?

    You can mix concrete like a pro if you grab the right tools and take note of these six best—and worst—practices.

    How to mix quikrete

    Concrete holds a place of honor in both the professional construction and do-it-yourself worlds. When mixed correctly, this simple combination of aggregate, cement, and water becomes strong and durable enough to produce walkways, beautiful planters, walls, and even house foundations. While concrete trucks with perpetually rotating drums deliver mixed concrete for large jobs, DIY concrete projects typically operate on a smaller scale, relying on dry sack concrete mixed with water. The secret to a successful project lies in mixing the concrete correctly and knowing which tools to use. Sure, the old standbys—a wheelbarrow and hoe—are still adequate choices for mixing all-purpose concrete if you don’t have access to a portable power mixer. But when it comes to wet-cast concrete, which is rapidly growing in popularity as a material for countertops and other castings, an impressive new tool promises to speed up the job: the HYDE StirWhip. To ensure satisfying results, read on to find out what you should (and shouldn’t) do with this trusty tool when you’re mixing concrete.

    How to mix quikrete

    DO gather all the materials and supplies you’ll need before starting.

    Before you begin, run through your checklist one last time. You won’t want to have to dig out a missing item once your hands are covered in wet concrete. At the top of your list will be the dry concrete mix and a water source. The tools you’ll need for mixing will depend on your choice of concrete:

    • Because the all-purpose concrete used in larger projects like sidewalks, slabs, or paver patios is quite thick and heavy—and there will be a lot of it—it’s a good idea to work with a sturdy wheelbarrow (one that won’t tip over under the weight) and a hoe. Or, consider upgrading to a portable concrete mixer, which you can rent from a big-box home improvement center for around $50 a day.

    • To make countertops, balusters, or other small concrete accents with smoother finishes, you’ll want to whip up a wet-set concrete mix that consists of smaller bits of aggregate. Mix this in a large plastic bucket using a fully charged power drill and the under-$10 StirWhip drill attachment. Because the StirWhip features an 18-inch-long, 3/8-inch-thick steel shank (unlike shorter mixing paddles), you can reach all the way to the bottom of a five-gallon bucket with ease so you won’t leave any dry powder unmixed. The attachment’s multi-finger configuration helps reduce drag on your drill while slicing quickly through the mix for a smooth blend. Plus, those open fingers are easy to clean of wet or dried concrete when the job is done.

    DON’T skip the protective eyewear, rubber gloves, long sleeves, and pants.

    Concrete splatters can burn eyes and irritate bare skin by quickly drawing out its moisture, leaving it rough, dry, and cracked. Take steps to protect yourself by donning the appropriate gear.

    DO know exactly how much concrete you need.

    By calculating ahead of time the amount of concrete your project requires—and adding 10 percent to ensure that you don’t run short—you’ll avoid “cold joints,” which occur when part of your project dries before you can mix and add the concrete needed to finish a project. Not only will you probably notice a visual difference between the first and second batches of concrete, but those cold joints will be weak spots where the concrete is more likely to break later. (For reference: A standard 80-pound bag yields 0.60 cubic feet of concrete, while a 60-pound bag yields 0.45 cubic feet, and a 40-pound bag yields 0.30 cubic ft.)

    How to mix quikrete

    DON’T just dump the dry concrete mix in first.

    This may come as a surprise to you if you’ve ever mixed concrete in a wheelbarrow, where you do add water to a heap of dry concrete mix. The wheelbarrow’s shape necessitates adding the mix first—the shallow sloped sides of a wheelbarrow make it too easy for water to slosh out when mix is thrown on top. But that’s not a hard-and-fast rule for mixing all concrete. When you’re working in a bucket, you’ll want to put the water in first (and you can do so without fear of losing any) in order to keep the dry concrete mix from sticking to the bottom of the bucket and making it difficult to blend. Once you’ve filled the bucket with the amount of water recommended by the concrete manufacturer, gradually trowel in the dry mix until you’re ready to blend it with your drill and HYDE StirWhip attachment.

    DON’T leave any water puddles or dry bits in the concrete mixture.

    In order to set correctly, the water and the dry concrete ingredients must be thoroughly combined. A good rule of thumb: Continue mixing with a hoe or blending with a StirWhip for three minutes after you no longer see any pockets of mix that are still dry or water pooling at the top. Otherwise, you could end up with undermixed concrete that once cured could be weak and prone to crumbling and cracking.

    How to mix quikrete

    DO test for “slump” before beginning your project.

    Concrete consistency is determined by “slump,” or how much the wet concrete settles after it’s been formed into a cone shape. To test the slump on your fresh batch, you can use a professional slump cone (available from home improvement stores) or a reasonable DIY facsimile made from a sturdy plastic cup with its bottom cut off. Dampen the inside of the cone, and place it so that its larger end is on a flat, nonporous surface. Then, fill the cone through its open top with thoroughly mixed concrete, tamping it down with your hands or (if the hole is too narrow) a rod as you go. When you lift the cone away, the wet concrete should slump to about half its original height if it is all-purpose concrete or one-third of its original height if it’s a more fluid, wet-set mix. If the slump is less than it should be, churn a little more water into the batch; a larger slump than expected requires additional dry mix. Test again before casting your project, and to ensure uniformity and strength in the finished product, don’t move on until the mix has reached a desirable consistency.

    And now, armed with some practical info—and a new tool—you’re ready to make your concrete dreams come true!

    How to mix quikrete

    Related Articles

    • How to Use Cement in a Grout Bag
    • Concrete Rubble Recycling
    • How to Repair a Driveway Using Premix
    • How to Order Concrete Used for Building a Driveway
    • How to Use Bleach on Concrete Floors

    Home improvement retailers who sell Quikrete brand concrete mix gladly refund your money if you purchase more Quikrete than required for a project, but you can save yourself the time, gas money and effort if you calculate the amount of Quikrete needed before you begin the project. Similarly, advance calculations save you from last-minute trips to purchase more Quikrete if you didn’t purchase enough product. Quikrete calculation requires only a few measurements and basic math.

    Measure the length, width and height of the are where you plan to use concrete. If you want to use a plastic storage box as a form for stepping stones, measure the length and width of the box and use the desired stepping stone thickness, usually about 2 inches, for the height measurement rather than measuring the entire box height. If you want to install a concrete patio, measuring the area for the concrete patio and use the desired thickness, usually about 4 inches, for the height measurement.

    Convert the numbers in feet and inches into decimal feet. To do this, convert the measurement to inches, then divide by 12. For example, a measurement of 5 feet 9 inches becomes 69 inches. Then divide 69 by 12 to get 5.75 feet.

    Multiple the length times the width, and multiply this product by the height measurement to find the total volume, or cubic feet, you need to fill with concrete. Assume a 10-by-10-foot square area with concrete 4 inches thick. When you multiply 10 by 10 by .333 feet, you get 33.333 cubic feet.

    Divide the total cubic feet needed by the total cubic feet that can be made from one bag of Quikrete Concrete Mix. Quikrete’s Concrete Mix yield’s about .15 cubic feet for every 20 pounds of mix, so a 40-pound bag yields .30 cubic feet, 60 pounds of concrete mix yields .45 cubic feet and an 80-pound bag yields .60 cubic feet. One 50-pound bag of Quikrete Fast Setting Concrete Mix yields about .375 cubic feet. For example, if you need to cover 33.333 cubic feet, using 60-pound bags of concrete, divide 33.333 cubic feet by .45 cubic feet to get 74.07 total bags of concrete.

    Round up the actual figure to the nearest whole amount to find the actual number of bags needed to complete the project. If your calculations provide a figure of 74.07 bags, you must purchase 75 bags to complete the project.

    Things You Will Need

    All construction projects have a margin of error, so it is always best to purchase more concrete than you actually need. Always purchase at least two extra bags of concrete or up to 10 percent more than your calculations indicate. You can always return any unopened bags or save the concrete mix for future projects.

    Mixing Quikrete is an easy process that requires a small number of tools. Quikrete can be mixed by hand or by machine mixing, so don’t worry if you don’t have all of the tools needed to get your project done. The outcome can be just as professional with other devices you may have more readily available.

    Usual Tools Needed

    • rubber gloves
    • safety goggles or glasses
    • wheelbarrow
    • small measured pail
    • concrete mixer
    • hoe or shovel

    Substitute Tools

    • gardening gloves or plastic gallon bags
    • safety glasses or goggles
    • plastic tub
    • gallon milk jug
    • hand or putty knife

    How To Use Alternative Tools To Make Quikrete

    Safety First

    Safety is the most important part of any project, and it should not be skipped or overlooked. Most tools needed to mix Quikcrete can be substituted for products you can find around the house, but I would not recommend finding an alternative for these products for all your concrete projects.

    Make sure to wear safety glasses and rubber gloves to protect your eyes and hands from the concrete. Concrete can induce burns that can be very harmful.

    If you don’t have rubber gloves or can’t find them anywhere, then try to find another type of hand protection that concrete can’t stick to. Other options could be plastic gallon bags to wear over your hands or different types of gardening gloves.

    Pour Quikrete In A Plastic Tub

    Instead of emptying the Quikrete concrete mix bag into a concrete mixer to do the work for you, you are going to have to do a bit of improvising. Pour the powder Quikrete into a 5-gallon plastic tub that is usually used as a storage container.

    This tub should provide enough depth and space to hold the concrete mixture that is about to be made. The most effective and cleanest way to pour the concrete bag into the tub is to cut a line vertically in the middle of the bag with a knife or scissors (or you could just bend the bag at the middle point till it rips) and pour the contents out slowly over the bin.

    Another important tip is to make sure you place the plastic tub near the project sight of where you are going to use the concrete because once you have made the concrete mixture, it will be hard to move due to its weight.

    Create Indent In Quikrete Powder

    Usually, this part is not needed when using a machine concrete mixer, but those can be difficult to find and expensive to buy or rent. Once the Quikrete bag is poured into the plastic 5-gallon tub, use your hand or your putty knife, depending on what you have, to make an indent in the mix.

    The indent made in the concrete is usually circular in shape in the middle of the mix, sometimes resembling the top of a volcano, to ensure that the next step is done evenly.

    Measure Out The Liquid

    Once the Quikcrete bag is poured and prepped for the liquid to be added, the next step is to measure out the liquid that will be added. In Quikrete mixes, water is always required and needed for the desired outcome. You can get this water from the tap or from your garden hose outside.

    The ratio of water to Quikrete powder is 3 quarts of water to very 80 pounds powder (a whole bag). You can measure this out in a small measured pail or even in an empty gallon milk container. If you decide to use a gallon milk jug, fill it up 3/4 of the way because there are 4 quarts in a gallon and only 3 quarts is needed for this mixture.

    Pour The Liquid Into The Mixture

    Now that everything is measured out, pour the water into the indent created in the concrete powder mix. Be sure to only pour 2/3 of the water at first into the concrete mix.

    If you pour it in all at once, you might change the consistency of the Quikcrete too fast and therefore not achieve the desired outcome. Slowly integrate the remaining 1/3 of the water slowly and only when needed to make the concrete mix smoother and less dry.

    Mix The Mixture

    To mix the Quikrete powder and the water together, one usually uses a shovel or hoe to ensure the mix is integrated correctly and to reduce the amount of concrete they get on themself. But, if you don’t have a hoe or a shovel, that is no problem. Simply use your hands, or a putty knife, to stir the two substances together.

    Most often the edges and sides are neglected, leaving the middle to be oversaturated with water. If you add more water to the dry edges and sides, you will make the mixture too watery and thereby throwing off the correct ratio. Make sure then that the edges and sides are correctly integrated into the mixture before you add more water to it.

    Achieving the Correct Consistency

    The more water you add to the Quikcrete mix, the more weaker it becomes. The dilution of the mix will lead to future structural problems in the project that the concrete is being used for.

    The consistency wanted and needed in a concrete mix is that similar to peanut butter or thick oatmeal. Once you think the mixture is combined correctly, pick up a little bit of the mix and roll it into a sphere or squish it in your fists. If the concrete can hold its shape, then it is ready to be used.

    If it feels too dry and lacks the consistency needed, consider adding more water little by little to the mixture until it is smooth. If the mixture feels too wet and won’t hold its shape, add a little more Quikrete powder mix to it to give it added strength and substance. It’s similar to creating the perfect pancake batter, not too runny and not too thick.

    Jot & Tittle Concrete – Calculator

    We have also included a Quikrete bag calculator that will tell you how many 80 lb. bags of Quikrete you will need to purchase and then MIX yourself to complete the same job. Quikrete is $4.30* per 80 lb. bag and you can rent a truck and a cement mixer from your local hardware store for $144.00*. We can deliver high quality ready-mix concrete for less money than you will spend mixing it yourself!

    *Price checked 3/9/2020

    How to Use the Calculator

    To determine how much concrete you will need for your project, enter the width, length and the depth in the boxes below.

    • When entering width and length; express the inches as a whole number and decimal.
    • For example, 8 feet and 6 inches should be entered as 8.5 ft. Likewise, the measurement 9 feet and 3 inches should be entered as 9.25 feet.
    • If you need assistance, call us we will be happy to help.

    Concrete Calculator: Rectangular

    Concrete Calculator: Circular

    Contact us today! 239-369-8007

    You save time and money by using Jot & Tittle Concrete! Call us today for information!

    Over 20 Years of construction experience serving Lee, Collier, Charlotte, and Hendry Counties

    I was a builder in NJ for 40 years, and never experienced the dedication to making sure the concrete was delivered, mixed correctly, and all done with a smile on the drivers face. This is how I ran my business always, and it made me feel great to see some still care about the product and especially the customer service. They made sure the unique sized truck was very close to the pour site under tricky conditions. Suggested the right consistency of the mix, which made the job much easier to finish, with much less labor

    WE HAVE WORKED WITH JOT & TITTLE FOR OVER A YEAR, AND FROM START TO FINISH OF A PROJECT THEIR CUSTOMER SERVICE IS OUTSTANDING. FROM THE EASE OF ORDERING CONCRETE. TO THE DELIVERY ON THE JOB EXCELLENT SERVICE. THE ABILITY TO ADAPT TO AN EVER CHANGING SCHEDULE

    A friend told us about you folks and you all were as good as mentioned. You all were very personable on phone and during delivery.

    Thank you so much. Your time and service is greatly appreciated. Everything was wonderful about your service.

    As a first time customer I had a few questions regarding the process. Sammy was extremely helpful in answering all of my questions and concerns. The delivery went smoothly with no hitches.

    Fast friendly service and best price around.

    You did everything well. Notified me of a possible earlier delivery, and kept me updated.

    Everything was perfect: time, exit, and customer satisfaction.

    Driver was patient. Person who took order was very pleasant and nice to speak with.

    Driver was polite and gave advice on how to level and finish project. Will definitely use them for future projects.

    Sam and Steve were very helpful and accommodating. They went way above the job description to help us.

    Showed up at scheduled time. Showed concern for adjacent property. Assisted with placement of concrete.