You may delete the unwanted connection by doing the following:
1. Use your mouse to click on the Start menu and select the Control Panel.
2. Click the “Network and Internet” button once the Control Panel loads and select the Network and Sharing Center.
3. Click the “Manage network connections” tab.
4. Look for the unwanted network connections you wish to remove in the scroll box. Depending on how many connections you currently have in Windows Vista it is possible you’ll need to scroll a bit to find the one you wish to remove.
5. Click on the unwanted connection you wish to remove.
6. Click the “Remove” button.
7. Confirm your selection by pressing “Yes” when asked whether you are sure you wish to remove the connection. You may also elect to press “Cancel” or “No” to return you to the previous screen and prevent the connection’s removal.
Note that you can also change network connections through the network wizard. Simply click Start, then “Connect To” and “Show all connections.”
8. Select the network connection you wish to change by right-clicking on it and selecting the option you wish. You can choose to “Disable” the connection, which would have roughly the same effect as completely removing it, rendering it inactive.
9. Press the “Delete” key after clicking on a network connection in the Network Connection window. This will completely delete the connection in the same way that removing it from the Control Panel would.
Microsoft Answers Support Engineer
Visit our Microsoft Answers Feedback Forum and let us know what you think.
If this post helps to resolve your issue, please click the “Mark as Answer” or “Helpful” button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster.
Chris Hoffman is Editor-in-Chief of How-To Geek. He’s written about technology for over a decade and was a PCWorld columnist for two years. Chris has written for The New York Times, been interviewed as a technology expert on TV stations like Miami’s NBC 6, and had his work covered by news outlets like the BBC. Since 2011, Chris has written over 2,000 articles that have been read nearly one billion times—and that’s just here at How-To Geek. Read more.
Windows 10 saves a list of Wi-Fi networks you connect to along with their passphrases and other settings. If you want to stop your PC from connecting to a network automatically, you’ll need to make Windows “forget” the Wi-Fi network.
The process was obvious in Windows 7, where you could just select “Manage Wireless Networks” in the Control Panel’s Network and Sharing Center and delete saved networks. Windows 8 removed this option and forced you to use Command Prompt commands. But in Windows 10, Microsoft once again provides a graphical interface for this.
How to Quickly Forget a Saved Wi-Fi Network
Microsoft finally streamlined this process in Windows 10’s Fall Creators Update, so you don’t have to dig through the Settings app or Control Panel.
Just open the Wi-Fi popup from your notification area, also known as the system tray. Right-click or long-press the name of the network you want to forget and select “Forget”.
This only works if you’re near the Wi-Fi network and it appears in the list. If you want to delete a Wi-Fi network your device can’t see at the moment, you’ll need to use the Settings app.
How to Forget a Saved Wi-Fi Network from Settings
To forget a saved Wi-Fi network that isn’t nearby, you’ll need to leave the old Control Panel behind and use the new Settings app. The “Manage Wireless Networks” function is no longer available in the Network and Sharing Center.
Head to Settings > Network & Internet to get started.
Select the “Wi-Fi” category and click the “Manage known networks” link.
You’ll see a list of every Wi-Fi network you’ve connected to. To forget a network, click it and click “Forget.” You can use the search, sort, and filtering options to find a network in this list.
The next time you connect to a network, you’ll be asked for its passphrase and Windows will set it up from scratch.
How to Forget a Saved Network From the Command Prompt
You can also do this from the Command Prompt, if you prefer. On Windows 8 and 8.1, this was the only built-in way to forget Wi-Fi networks because Microsoft didn’t provide any graphical tools.
Launch a Command Prompt window as Administrator to get started. To do so, open the Start menu, search for “Command Prompt”, right-click the Command Prompt shortcut and select “Run as Administrator.
Type the following command and press “Enter” to show a list of your saved Wi-Fi networks:
Locate the profile name of the network you want to forget. Type the following command, replacing “PROFILE NAME” with the name of the network you want to forget:
For example, let’s say you want to remove a network named “BTWiFi”. You’d type the following command:
- › Samsung Galaxy Phones Are Getting Grammarly Installed by Default
- › How to Enable Cookies in Google Chrome
- › How to Remove Extra Spaces in Your Google Sheets Data
- › How to Add Alt Text to Images on Facebook
- › How to Find Your Phone Number on iPhone or Android
Chris Hoffman is Editor-in-Chief of How-To Geek. He’s written about technology for over a decade and was a PCWorld columnist for two years. Chris has written for The New York Times, been interviewed as a technology expert on TV stations like Miami’s NBC 6, and had his work covered by news outlets like the BBC. Since 2011, Chris has written over 2,000 articles that have been read nearly one billion times—and that’s just here at How-To Geek.
Read Full Bio »
Is your Wi-Fi list filled and you need to add a new network? If that’s the case, you’ll be looking to clear up some space to add a new network, as your Windows 10 device only saves a certain number of networks. Besides this, there is even a threat that a dormant network that appears to be a public connection might steal your data. Though not so easy but it is not impossible. Well, this could happen to any device and nearly every platform. Windows is the most vulnerable among all and keeping this in view we are here to explain a few methods on how you could delete saved Windows 10 Wi-Fi networks.
Deleting Saved Windows 10 Wi-Fi Networks:
The Basic Method: The easiest and basic way to remove a network from the Wi-Fi list is that click on the network icon shown on the right corner of the screen which will pop-up a list of networks associated or available. Find the network from the list you want to delete and click and hold it for a couple of seconds or simply right-click it to open a drop-down menu. From the menu, click forget which will delete the connection.
This option is applicable as long as your device is in the range of the network to be deleted. Else it will not show the network in that list.
From the Network Settings: If the basic method does not work, you will have to go through this option. All you have to do is that click the network icon in the notification area of the start menu bar or the system tray. That would be on the bottom right corner of the screen unless you have changed the orientation. A menu would pop-up showing all the available networks and the basic Wi-Fi controls.
Right above the controls is the Network Settings. Click it open and it will take you to the Networks and Internet window. There you would see the networks once again, scroll down and click on Manage Wi-Fi Settings just below the Advanced Options. A new window will open with the options for Paid Services and Manage Known Networks.
From the Manage Known Networks, click on the network you wish to delete. A menu would appear in the bottom with Share and Forget options. Click Forget and that network would be deleted from the library.
Deleting Network using Settings App: Another method that you could use to delete the network is from the Settings App. Open the Settings App and choose Network & Internet option that should be on the left side of all other options. From the Network & Internet window, choose Wi-Fi, shown just beneath the status. From there, click on the Manage Known Networks which will open up the list of all the connected and available networks. Find the network you want to delete, and if you are unable to find it, use the Search This List filter to find it immediately. Next, click on the appeared network and choose to Forget which will remove the network.
Expert and Old Options: If you had been using Windows 8 for long or want to go using the old techniques, you may delete the network using this method. Open the Command Prompt as the administrator. Well, you will have to search for the Command Prompt from the Start menu as it is known shown in the apps. Once the Command Prompt is open, enter “netsh wlan show profiles” which in result will bring a list of all the connected and remembered networks saved with the profile names. Find the profile you want to delete. Suppose the profile name of the network is Alexander4217, then you have to enter the command: netsh wlan delete profile name=“Alexander4217”.
When you move from one place to another with your laptop, you try to connect to different WiFi networks. At the end of the day, you will have saved a lot of WiFi networks on your computer. In Windows 10, you are able to see them just by clicking on the WiFi icon that appears in the default taskbar.
It is possible to remove these WiFi networks either from the configuration page or from the command line.
How to remove unused WiFi networks
Surely you have tried it by right-clicking on one of them in the list of saved WiFi networks that are displayed when clicking on the WiFi icon in the taskbar, however, you will have noticed that Windows 10 does not allows this option and does not display any menu when performing this action.
What you can do is go to the Windows 10 configuration page through the Start> Settings menu and then select the Network and Internet option . Next, in the left side menu click on the WiFi option and then on the Manage known networks link that appears in the right panel.
how to forget a network windows 10
This will display a new window with a list of known networks from which you can eliminate the WiFi networks that you do not use. To do this, just click on each one of them and click on the Forget button that appears.
You can also do this from the command line by opening a command prompt window and using the netsh command. To show all known WiFi network profiles on the system, the first thing you are going to do is issue the netsh wlan show profiles command .
Once you have identified the profiles or networks that you want to delete, launch the command: netsh wlan delete profile name = “Wi-Fi name” interface = “Wi-Fi” . You will get a message indicating that the profile “Wi-Fi Name” has been removed from the “Wi-Fi” interface. You can execute the same command with the name of other WiFi networks that you want to eliminate from your system.
If you like the content, we would appreciate your support by buying us a coffee. Thank you so much for your visit and support.
If your computer has Windows 10, its system saves the list of Wi-Fi networks you connect to, including their passphrases. The next time your device comes within the range of these saved networks, it will automatically connect to one of them. If you want to avoid this, you have to make Windows ‘forget’ the Wi-Fi networks it saved.
In Windows 7, the process is relatively simple. You can simply go to the Control Panel’s Network and Sharing Center and select Manage Wireless Networks. On the other hand, if you’re using Windows 8, you would have to go through Command Prompt just to remove saved networks. However, in Windows 10, there is a graphical interface that makes it easier to do this. Needless to say, it is easier to learn how to forget a Wi-Fi network on a Windows 10 PC.
How to Delete a Wireless Network Profile in Windows 10
When Microsoft developed the Fall Creators Update for Windows 10, they streamlined the process of removing a wireless network from a computer. This means that you would not have to go through the Control Panel or use the Settings app just to delete a saved Wi-Fi network. Here are the steps:
- Click the Network Connection icon your taskbar. You can find this on the lower-right corner of your screen.
- Right-click the name of the network you want to remove.
- Select Forget from the options.
Keep in mind that this will only work if you are near the Wi-Fi network. If you want to remove a Wi-Fi network that is out of your device’s range, you’d have to use the Settings app.
Using the Settings App to Remove a Saved Wi-Fi Network
If your Windows 10 device is far from the Wi-Fi network you want to remove, you can still get rid of it by using the new Settings app. Keep in mind that in the Network and Sharing Center, the Manage Wireless Networks function is no longer available. Here are the steps you have to follow:
- Click the Search icon on your taskbar.
- Type “settings” (no quotes), then hit Enter.
- Select Network & Internet, then click Wi-Fi from the left-pane menu.
- Click Manage Known Networks.
- Click the Wi-Fi network you wish to remove, then select Forget.
It is worth noting that you can easily find a specific network from the list by using the search, sort, and filtering options. Once you’ve removed a network, you will be prompted to submit its passphrase when you attempt to connect to it again.
However, before connecting to any type of network, make sure that your PC is protected from malicious attacks. As many know, when you are connecting to a public network, criminals can take advantage of this and hack into your computer. They can install malware and find their way to your sensitive information and bank accounts. That said, we recommend securing your PC, using Auslogics Anti-Malware .
Whenever you connect to a wireless network, Auslogics Anti-Malware will protect your computer from malicious attacks and threats. What’s more, it is designed not to interfere with your main anti-virus, allowing you to get the optimum security you need.
Which method do you think is the easiest way to remove a saved Wi-Fi network?
How can I clear out all old Wi-Fi profiles on Windows 7? Look for a way to remove wireless networks that no longer worked because their passwords have been changed? In this tutorial we’ll show you different ways to delete wireless network profiles in Windows 10 / 8 / 7, using System Tray, Command Prompt or Registry Editor.
Method 1: Delete Wireless Network Profile Using System Tray
Click the wireless network icon in the system tray from the bottom-right corner, and you’ll see a list of wireless networks. Right-click on the network you want to delete, and then select Forget from the pop-up menu.
Now the system will forget the selected network, and it not be able to connect to that Wi-Fi network.
Method 2: Delete Wireless Network Profile Using Command Prompt
Open the Command Prompt as administrator and run the following command to get the list of all wireless network profiles stored on your local PC:
netsh wlan show profiles
Find the name of the wireless network profile you want to delete, then type the following command to remove it:
netsh wlan delete profile name=”profile name”
If you want to remove all the wireless network profiles, simply type:
netsh wlan delete profile name=*
Method 3: Delete Wireless Network Profile Using Registry Editor
- Open the Registry Editor and navigate to the following key:
- Click each subkey under Profiles, and check the ProfileName value on the right to see if that is the wireless network connection you want to remove. Once you find the subkey, right-click on it and select Delete.
WiFi is not a new term for us. W all use WiFi networks around us to connect our system to access the Internet. Most of the devices having WiFi support also have the ‘connect automatically’ facility, so that if you came in the range of a previously used WiFi network, at second instance, you get connected automatically. A time may come when you may find that there are just too many WiFi network profiles present on your Windows computer, many of which you may not need now.
While there are four ways to delete WiFi Network Profile, in this post, we will see how to manually delete WiFi Network Profiles using CMD command and Registry in Windows 11/10.
Basically, Windows doesn’t provide you the native options to delete a WiFi network from the profiles list. In Windows 11/10/8.1, you have the option to Forget Network. However, forgetting the network does not completely remove the entries of the network profile. If you connect using this network in the future, you might face trouble while connecting. In such a case, you may need to erase the unusable WiFi networks manually following this way:
Delete WiFi Network Profiles using Registry
1. Open administrative Command Prompt and run following command to get a list of all the wireless networks to which your system has made the connection:
2. Refer to the above-shown image, suppose we want to delete the wireless network profile dlink 15. So we run this command to erase it:
Here you can replace the dlink 15 network with the WiFi network profile name you wish to delete on your system, Windows will notify you when it is done. You can re-run the command mentioned in step 1 to assure that the network profile has been removed. However, still, there is no complete removal of the network, so go to the next step.
3. Moving on, press Windows Key + R combination, type put Regedt32.exe in Run dialog box and hit Enter to open the Registry Editor.
4. Navigate here:
5. In the left pane of this location, under the Profiles key, you’ll see long name subkeys. For each network, either it is WiFi or Ethernet type, there is a unique key.
You have to highlight each key in the left pane and in the right pane, check the ProfileName string’s Value data; like we have found the entry for dlink 15 which we deleted in step 2. Once you find the correct subkey for deleted network profile, right-click on it and select Delete.
Thus your selected network profile gets removed completely.
Date: February 21, 2020 Tags: Network, Wi-Fi
Local Security Authority cannot be contacted in Windows 11/10
How to force WiFi to connect over 5GHz in Windows 11/10
WiFi option not showing in Windows 11
An Electrical Engineer by profession, Kapil is a Microsoft MVP and a Microsoft Content Creator. Please read the entire post & the comments first & create a system restore point before making any changes to your system.
By Genesis Emmanuel Gonzales – June 13, 2016 – no comments Email article | Print article
Windows 10 by Microsoft was launched in 2015, and it is a big hit because of its additional features and the user-friendly interface. If your system meets the requirements that are needed to install Windows 10, then you can install it using USB on your system. Windows 10 has a technical preview that is a beta version and beta versions have some errors and issues in them. Microsoft is improving Windows 10 day by day by sending updates to resolve the issues and bugs. This technical preview of Windows 10 is very much stable.
This is a stable version, and any home user can use this version of Windows 10. But there are some problems with the Wi-Fi connectivity. Let’s assume that there are two or three networks on your connection list and among them one or two don’t connect to your device and shows an error if you try to connect them. You want to forget them, but you don’t know how to do this? In Windows 8 or 8.1 it was very easy to forget a saved network but in Windows 10 PC Settings and Wi-Fi connectivity screens are not embedded in the taskbar, and it is a bit challenging to search and delete the saved Wi-Fi network.
How to Delete a Wi-Fi Network in Windows 10 Using PC Settings:
Here are some simple and easy steps using which you can easily forget or delete the Wi-Fi network:
- Click the Wi-Fi icon displayed in the taskbar.
- A window will be indicated on the screen. Now click on Network settings icon after clicking the option a window will pop-up that will display the Wi-Fi network settings of the system.
- In the network settings window there will be an option to manage Wi-Fi settings, hit the option.
- Under the option of Manage Wi-Fi Settings window, there will be a list of all available Wi-Fi connections at the bottom of the page. Just click on the desired connection and select the Forget button.
- If you want to reconnect to the forgotten network, then go back to connections tab and click on Wi-Fi and enter a password for the deleted network again to connect to it.
This is a simple solution you can try in case you are having any Wi-Fi connectivity issues on your Windows 10 system. Keep it in mind that if you forget or delete a network, then the password for that wireless connection will be removed, and you have to enter the password again to connect with the network.
How to Delete a Wi-Fi Network in Windows 10 Using Command Prompt
You can delete or forget any wireless network stored in Windows 10 with the help of Command Prompt.
- Open the cmd (command prompt) window as an administrator and type the following command netsh wlan to show profiles. The command will display all the wireless network connection profiles that are stored by Windows 10.
- Choose the Wi-Fi network that you need to remove or to forget and then write in the command to ignore or delete it netsh wlan delete profile name=profile name.
In just a few and simple steps, you can easily forget or delete the Wi-Fi network from the connection list of your system.