How to drive smoothly with a manual transmission

Learning how to drive a car with a manual transmission is easier than you think if you follow these simple steps.

How to drive smoothly with a manual transmission

New to the stick-shift game? Don’t be intimidated! It’ll take less time than you think to master the manual transmission, and soon you’ll be rolling on your own. But before you attempt to drive a manual-transmission vehicle, there are six basic things to do that will significantly increase how fast you’ll learn and how safe you are during the process:

  1. You’ll need someone who knows how to drive a stick to ferry you and the car to a good practice location and coach you from the passenger seat. Select a large, level, empty parking lot for your first session. This will greatly reduce distractions from traffic or pedestrians.
  2. Once you’re in the driver’s seat, make sure the vehicle’s emergency brake is on.
  3. Get familiar with the pattern of your vehicle’s shifter by consulting the owner’s manual. On most floor shifters, a grid of sequential numbers—called the shift pattern—can be found atop the shift-lever knob or on the face of the dashboard. The shift pattern shows you the location of each gear and the order you must move the lever through as you accelerate and decelerate—first gear being the lowest and used for starting from rest.
  4. Look down at the three pedals on the floor. On the left is the clutch. The center pedal is the brake. And on the right is the throttle, or accelerator.
  5. Push the clutch pedal in with your left foot, hold it down, and move the lever in sequence through the gears, from the lowest gear to the highest, and then from highest to lowest. Now do it again, but after sliding the lever into the next gear, release the clutch. Then depress the clutch and move the vehicle to the next gear, release the clutch, and so on. These are the motions you will use when you’re driving.
  6. And finally, push the clutch pedal in and move the lever into the neutral position. When the shifter is in neutral, it can be wiggled easily left and right. When slotted into each gear, it is locked in place and lacks this side-to-side motion.

How to drive smoothly with a manual transmission

How to drive smoothly with a manual transmission

You are now ready to learn how to operate a manual transmission by driving the car. Here are the steps:

  • Put the shifter into the neutral position. Place your right foot firmly on the brake pedal and fully depress the clutch with your left foot.
  • Turn the ignition key or press the starter button. (If you’re not holding the clutch pedal fully down, a neutral-safety switch might not allow the starter to be activated.)
  • With the clutch depressed and the car now running, move the shift lever into the first-gear position in the shift gate. Check the area immediately in front of the car for vehicles, objects, and pedestrians, then release the parking brake.

How to drive smoothly with a manual transmission

  • Critical step! Very smoothly and slowly, lift your left foot until you feel the car just begin to move. At the point the car starts to inch forward, stop any movement of your left (clutch) foot. Now simultaneously slide your right foot off the brake and onto the throttle pedal (to the right), bringing engine speed up a bit.
  • Feel the car edge forward, and as it does, release a little pressure from the clutch; at this point, you will be hardly moving it.
  • Finally, lift fully off the clutch pedal and slowly step into the throttle pedal. The car should be picking up speed. If it shudders to a stop and the engine shuts off, you’ve stalled. Put the shift lever back in neutral and start over again with more focus on a smooth application of throttle and more gradual clutch-pedal release. Getting this coordinated might take a few tries. Don’t give up!
  • If the car is now gliding along at low speed, it’s time to shift into second gear. Lift your foot off the throttle while simultaneously stepping down fully on the clutch pedal. As the car coasts, move the shift lever from the first-gear position to the second-gear position. Release the clutch pedal slowly while gently stepping back into the throttle pedal.

How to drive smoothly with a manual transmission

  • As with a multispeed bicycle, higher road speeds are attained by moving up sequentially through the gears. Each time a higher gear is required, lift off the gas, step down on the clutch, and move the lever to the next higher gear. If your car’s acceleration seems “bogged down,” you needed to be in the previous gear a bit longer. You’ll get the feel for which gear you should be in at a given speed; the engine’s sound and the amount of acceleration the car is delivering will guide you.
  • To slow down or stop, apply the brake pedal smoothly. To stop fully, you must push the clutch all the way in as the car gets below about 5 mph, or the engine will stall. At a stop, it’s a good idea to slide the shift lever into neutral and keep the foot brake applied.
  • For parking, you’ll need to be able to access reverse. In some cars, the shift lever needs to be pushed down before you can slot the lever into position (to disengage a safety lockout that keeps you from shifting into reverse while driving forward). Consult your owner’s manual about how to engage reverse. Don’t try reversing and parking until you’ve mastered creeping ahead in first gear from rest, as you’ll need to perform the same slow-creep operation while backing up.
  • When you’re done driving: To park the car safely, put the shifter into first or reverse and apply the parking brake.

How to drive smoothly with a manual transmission

Shifting priorities: The key to driving a stick like a pro is the simultaneous engagement of the clutch and smooth application of the throttle. To practice, try listening and feeling for slight clutch engagement in first gear without applying any throttle—until you can recognize clutch engagement by the slight movement of the vehicle and the engine sound, which will dip slightly.

All that’s left to become an expert manual-shift driver is to practice your clutching, shifts, throttle application, and takeoffs in a low-traffic area. You’ll be surprised how fast you can learn if you do your homework up front.

Is it possible to drive smoothly with a manual transmission?

But driving a manual transmission smoothly is actually really easy. You need to know how to properly use the clutch, when to shift gears, and how to use the accelerator pedal correctly. After that, it takes lots of practice to make the gear transitions feel smooth.

Are there any problems with my 1979 450SL?

So I’ve owned my 1979 450SL for a few months now, and I’ve put around 2k miles on it or so, and it still drives, and strong too (never driven or been inside another one to know if it’s supposed to drive better), but I have a few “problems” that need diagnosing.

Where does the noise come from in a Mercedes 450SL?

The noise usually occurs in the lower gears (haven’t ever noticed it in the last gear), and is always gone after I switch to a higher gear by accelerating and then letting go of the gas pedal to allow the transmission to switch gears (my car’s an automatic).

When did Mercedes Benz start using 5 speed transmission?

The 5-speed transmission that was used between 1995 up to 2008 is one of the best transmission ever built. Now let’s see if we can help you troubleshoot your transmission. By continuing to read this article you agree to use this information at your own risk. Top 5 Mercedes-Benz Transmission Problems.

What kind of transmission did Mercedes SL500 have?

Some packages were called “AMG,” but lack the engines and real hardware of the 2003 and newer AMG model cars. From 1990 – 1995 the SL500 used a boring hydraulic 4-speed transmission. It was boring because it didn’t usually downshift when punched.

When did the SL500 body style come out?

This R129 body style SL500 was made from 1990 through 2002. It was called the 500 SL from 1990 – 1993. They all have just about the same suspension regardless of year or package. The “sport” packages are just trim and tires, not suspension, engine or drivetrain.

When did the Mercedes SL500 R129 go away?

They used a little less fuel than the first four speed automatic SL500s. By 1996 the new 5 speed transmission increased the fuel economy of the V8 SL500 to within 1 or 2 MPG of the SL320, thus the SL320s went away in 1998. Today you can get a beater early 1990’s 300SL for about $10,000.

What’s the difference between a SL500 and SL600?

The SL600 weighs an additional 330 pounds, or the equivalent of having two people sitting on your hood compared to an SL500. Handling is iffier with the SL600’s added weight.

Which is faster, a synchromesh transmission or a manual transmission?

In addition, the process of shifting a non-synchromesh transmission is faster than that of shifting a synchromesh transmission. For racing of production-based transmissions, sometimes half the teeth on the dog clutches are removed to speed the shifting process, at the expense of greater wear.

Which is the correct gear ratio for a manual transmission?

Most automobile manual transmissions allow the driver to select any forward gear ratio (“gear”) at any time, but some, such as those commonly mounted on motorcycles and some types of racing cars, only allow the driver to select the next-higher or next-lower gear. This type of transmission is sometimes called a sequential manual transmission .

Who was the first person to make a manual transmission?

Unsynchronized transmission. French inventors Louis-Rene Panhard and Emile Levassor are credited with the development of the first modern manual transmission. They demonstrated their three-speed transmission in 1894 and the basic design is still the starting point for most contemporary manual transmissions.

What kind of oil does 6 speed manual take?

I just picked up a 2000 F-350 7.3 Diesel 4X4 Crew Cab with the 6 speed manual transmission. I was told this transmission and transfer case takes ATF fluid and not normal 80/90 weight gear oil like most manuals. Is this correct or was I told a bunch of BS, this just does not seem right.

Why is API GL-5 recommended for manual transmission?

• Contains special additives to assist in protecting gear teeth from rust and corrosion and reduce chattering in limited-slip differentials • Provides outstanding thermal stability for cleanliness and longer service life • Recommended for (conventional and limited slip) manual Transmissions where an API GL-5 or MT-1 fluid is specified

Why is it important to use the correct oil in a manual transmission?

It is important to use the correct fluid oil in you manual transmission, the vehicle manufacturers have done extensive testing to specify the correct fluid. The oil is designed to reduce friction and provide necessary cooling. Information is provide for most vehicles.

What kind of fluid do you use for manual transmission?

• Recommended for all vehicles manufactured by General Motors & Ford (except those with CVTs, or those calling for Type F ATF) including Mercon LV • Recommended for many imports, including Toyota, Lexus, Honda, Acura, Nissan, Mazda, Mitsubishi, Hyundai, BMW, Volkswagen and Audi • Outperforms conventional Transmission fluids Part# VV324

But driving a manual transmission smoothly is actually really easy. You need to know how to properly use the clutch, when to shift gears, and how to use the accelerator pedal correctly. After that, it takes lots of practice to make the gear transitions feel smooth.

Why is my transmission not shifting to higher gears?

Other possibilities could be an engine related problem that will cause the computer to not allow the transmission to shift into higher gears. This condition can also be caused by low transmission fluid, contamination due to lack of maintenance or water intrusion, or internal wear and tear on the transmission parts inside the transmission.

What to do if your transmission is stuck in gear?

If your transmission is stuck in gear and you are far away from home, try this: 1 Pull over and turn the car off. Remove the key. 2 Do not press the gas pedal or any other buttons on the car. 3 Wait 20 seconds. 4 Start the car and drive to see if it is out of limp mode.

What’s the best way to change gears smoothly?

Release the clutch slowly and gently press on the accelerator. After you’ve moved the gear shift into the gear that you want, slowly release your left foot from the clutch as you gently apply pressure to the accelerator pedal. With practice, you will feel the engine change gears smoothly. Every engine is a little bit different.

If you have driven automatic cars for all your life and suddenly appeared to have a manual transmission vehicle, it is not so easy to go on them, especially if you are driving in the city. For example, if you have never driven a stick shift car before and suddenly find yourself behind the wheel of one during your daily commute through heavy traffic, it can be very difficult to shift gears smoothly or even get the car into first gear without stalling out.

We all know that driving manual cars is usually cheaper than automatic but still many people do not like shifting their own gears. However, manual transmission vehicles deliver better fuel economy and offer more control over acceleration and braking than automatics.

It doesn’t matter how new or how old your car is – we will show you some tips on how to drive a manual car:

First, you have to choose the right place for learning how to drive a stick shift car – an empty parking lot or closed course.

You should also check your owner’s manual for instructions on how to operate the clutch safely. After that take several deep breaths, sit up straight in your seat, put both feet firmly on the pedals, then turn the ignition key and start your engine.

1) Keep calm

When starting out, this might seem like common sense, but if you are flustered or not paying attention it can be easy to stall the car. The clutch may feel odd at first, so don’t be afraid to give it some gas when you are starting out.

2) Find the right position for your feet

When you are looking for the right position for your feet, it is usually recommended that you place your left foot on the clutch and your right foot on the gas pedal.

3) Get a feel for the car’s movement

If you have not driven a manual car before, it can be difficult to find the sweet spot between too slow and too fast when shifting gears. A good way to learn this is to practice in an empty parking lot. Try engaging each gear by letting out the clutch very slowly as you push down gently on the accelerator.

4) Use the correct motion

Do not move your hand to shift gears without pushing in the clutch. If you do so, it can cause damage to your car and will probably frustrate you every time you drive it.

5) Practice makes perfect

It takes at least 50 hours of practice before you are able to effectively operate a car with a manual transmission. You should spend at least an hour or two each day practicing if possible. After getting comfortable with downshifting, try gradually speeding up as you engage each new gear until eventually, you are able to smoothly accelerate through all of them without stalling out.

Driving a car with manual transmission is a lot of fun. You control everything about your car, how it accelerates and brakes. It is true that some people do not like or are afraid of manual transmissions because of the clutch but if you get used to it, your skills will get better every day. Driving a stick shift car gives you more control over your vehicle, which can help you drive more safely on the road.

How to drive smoothly with a manual transmission

Although it seems intimidating at first, there’s nothing behind the combination of clutch, shifter and gas pedal that you can’t master with just a little practice. Check out these driving stick tips designed to help you understand how to get the most out of your manual transmission car.

1. The Key Is to Be SmoothHow to drive smoothly with a manual transmission

One of the fundamental concepts to grasp when learning to drive a manual gearbox is that the clutch is not an on/off switch. Whether clutching in or clutching out, you need to sync your left foot on the clutch pedal with your right foot on the gas pedal to transition from one gear to the next. This is most crucial when starting from a stop: letting the clutch out gradually while slowly pushing down on the accelerator is vital to get going without stalling.

If you let the clutch out too quickly, the engine won’t have enough torque to get the car moving. But let it out too slowly, and you run the risk of damaging the clutch over time as it tries to manage too much power. It’s a balancing act that demands smooth, deliberate actions with your feet.

2. Don’t Ride the Clutch

You might have heard someone warn you against “riding” the clutch. What exactly does that mean? You’ll notice in the section above that it’s not a good idea to use too much gas while slowly letting out the clutch. Riding the clutch is an extension of this — it’s when you keep the clutch pedal partially depressed during acceleration, normal driving or waiting at a red light. To avoid damaging the clutch, it’s best to keep the car in neutral at a longer stop, depressing the clutch only when you are actually changing gears.

3. The Right Gear for the Right Situation

Unlike an automatic transmission, in which a valve body or computer makes all the shifting decisions for you, a manual requires you to decide what gear the car needs. One of the best driving stick tips is to learn the characteristics of your car’s engine and gears so you can choose the right cog for high-speed cruising, for slow-speed corners and for creeping forward in traffic. Generally speaking, the higher the gear, the better your fuel mileage, because you’re keeping engine revolutions low. However, lower RPMs tend to equal less torque, which will limit your ability to accelerate and force you to use a lower gear. Lastly, by keeping your manual transmission in good shape through regular maintenance, it’ll be in better shape a day-to-day basis.

Driving stick is not as complicated as it seems. With a little practice using the tips outlined here, you’ll be crusin’ in no time!

Check out all the drivetrain parts available on NAPA Online or trust one of our 17,000 NAPA AutoCare locations for routine maintenance and repairs. For more information on driving stick, chat with a knowledgeable expert at your local NAPA AUTO PARTS store.

How to drive smoothly with a manual transmission

Driving in a manual car is a skill not everyone can inherit. Maybe you want to impress your workmates or colleagues that you could drive a manual car smoothly as an automatic car; there are a couple of dos and don’ts you would need to master.

Basically, automatic cars are easier and comfortable to drive, while manual cars require proper training. When it comes to price, an automatic car costs every penny compared to a manual car. If you just bought a car and want to get a driver’s license, the milestone starts with passing a Learners Driver Test. Now, the test is made easy with the free Learners Driving Test demo online at The practice test makes sure you pass the test with real test questions rather than relying on guides and handbooks.

One driving a manual car smoothly needs to take care of the clutch and accelerator pedal according to the situation; after that comes the gear transmission. Subsequently, here is an illustrated list of tips you can follow to drive a manual car as flat as a pancake.

How to drive smoothly with a manual transmissionSource: Medium

Before starting: Learn basics

How many gears do manual cars have?

It’s normal for cars to have four gear transmissions, but the increasing user demand started the trend of vehicles having five gears. Many cars these days also come with the six-gear transmission, while seven gears are also available but have a rear implementation.

If you consider old-fashioned cars, they had four gears, having them less confusing double-declutching as the synchromesh gearboxes were absent. Recently seen, higher gear vehicles need more or a little trick to get started.

How to avoid damaging the manual clutch

Resting your foot to the clutch every time is not a good habit, but it’s a regular habit all of us are guilty of. Driving a manual car in heavy traffic can make your foot tired of all the heavy lifts on gear transmission. Here is how you can avoid damaging the manual clutch.

  • Don’t put your car in gear while you are in lights and traffic.
  • We have a habit of resting our hands over the gear lever; it’s advised not to put any pressure on the gear that directly puts compulsion on the gear forks resulting in an immediate expensive repair.
  • Don’t lug your car if you are low speed. It damages your clutch quickly
  • Do not rev your car high while you launch it.
  • Ensure you are pressing the clutch only while you are shifting gears; otherwise, you might need to replace the clutch plate earlier.

Method 1: Using the clutch

Keep your left feet resting on the clutch

You might already be familiar with the clutch pedal being at the left. Keep your feet ready to press the clutch when it’s time to shift between gears. Knowing to shift gears smoothly while matching the speed is the first skill you would need to drive a manual smoothly. It’s not advised to press clutch every time you don’t shift; it might damage the clutch immediately.

Know that your clutch pedal is the left one, the center pedal is the brake and the pedal on the right is gas.

Press clutch all the way to put the vehicle in neutral

When you want your vehicle to transmit between the gears, press the clutch pedal gently and all the way to the floor. Please do not press it hard; you might damage it. Also, do not press the clutch before you hit shift gears.

Release clutch all the way after shifting gears

Before you hit gear, stick to the first gear, press and keep holding the clutch pedal, and slowly release your feet. A quick shift of your feet from the clutch might turn off the vehicle’s engine. You may want to practice gear shifting and clutch in a parking lot if you are not confident enough before taking it to the busy road.

How to drive smoothly with a manual transmissionSource: Pinterest

Method 2: Shifting gears

Press clutch all the way and then shift gears

Shifting gears and then pressing the clutch is not a conventional driving habit when it comes to manual driving. You might end damaging your car as it shakes and jolts. First, press the clutch to the floor and then gently work your way through shifting the clutch.

Move the gear to the center to put the vehicle in neutral

The neutral gear is located in the grey area of the transmission box. Without looking at the dashboard, you will be able to know the vehicle being in neutral if you can wiggle the stick side to side easily.

Shift gears according to the RPM

If you want to drive smoothly, you need to mark the RPM and shift gears properly. RPM refers to the Revolution per Minute of an engine. As you notice the increase in 2500 RPM, it’s time to shift gear to the next level. Practice at the parking lot to match the RPM and shift gears for conventional diving skills.

Release the clutch slowly

After you shift the gear to the next higher or lower, make sure you release the clutch pedal slowly; if not, you may experience jolting.

How to drive smoothly with a manual transmissionSource:

Method 3: Mastering the Accelerator

While you transmit between gears and hit the clutch pedal, do not remove the accelerator pedal suddenly. When these three combinations don’t match, you as well as passenger experience jolting of a car. Release or apply accelerator pressure gently to drive smoothly.

Operating every pedal and transmission gently is the conventional method to drive manual vehicles smoothly. Many believe driving in the manual car offers more control over and is fun to ride. You must pay attention to every aspect while you start the first time, and after a couple of tries, it suddenly becomes your habit.

Driving a manual car for the first time seems scary as you have to take overall control of the vehicle. Drivers who have a manual car driving license can drive an automatic car, but the ones with an automatic car driving license cannot drive a manual car. As mentioned in the article above, you surely require some learning to shift transmission and gears smoothly.

You absolutely can with nothing to worry about. These modern automatic transmissions that have a manual mode are meant to do that. First introduced in exotic cars, modern automatic transmissions now give the option of a manual mode in which the driver may shift gears for himself.

What happens when you shift gears without stopping?

Shifting into Park while the car is still moving can eventually damage this locking mechanism. If it fails, your car could roll away. One way or another, you may be in for a very large repair bill. So always remember to stop before shifting into Park.

Is it bad to shift your automatic transmission manually?

But the good news is that it doesn’t do any harm. Unlike a manual transmission, which forces you to use up a little bit of your clutch disk every time you shift, an automatic transmission uses a fluid to transmit power from the engine to the driveshaft. So you’re not really causing any extra wear and tear.

How do you use manual shift mode on automatic transmission?

Press the shift up button to raise the gear as you speed up based on the rpm found in your user manual. Press the shift down button to lower the gear as you slow down or allow the car to automatically downshift for you.

How to shift gears in a manual car?

Below are 5 tips on how to shift gears smoothly in a manual vehicle. If you want your gear shifting to be as smooth as possible, then you need to use the clutch pedal between shifts. On the floor, you will see three pedals to choose from. The left pedal is the clutch pedal, the middle pedal is the brake pedal, and the right pedal is the gas pedal.

How many gears does a stick shift have?

As a beginning driver, you will want to know that usually, a stick shift has four or five forward gears and reverse. There is also a clutch pedal to the left of the brake pedal. In order to change gears, you must first press the clutch down and then shift the manual transmission into first gear.

Is it possible to drive smoothly with a manual transmission?

But driving a manual transmission smoothly is actually really easy. You need to know how to properly use the clutch, when to shift gears, and how to use the accelerator pedal correctly. After that, it takes lots of practice to make the gear transitions feel smooth.

Which is the right pedal to shift gears?

The left pedal is the clutch pedal, the middle pedal is the brake pedal, and the right pedal is the gas pedal. You press the clutch pedal with your left foot prior to shifting gears. When you press the clutch pedal, it disconnects the engine from the gearbox.

During the early years of the 1990s to 2000s majority of the cars that are being driven here in the Philippines is a manual transmission. However, for the past ten to fifteen years more and more drivers learned to drive an automatic transmission because it is a lot easier and more convenient.

I started driving an automatic transmission car when I was in college. However, I was told by my mother to learn how to drive a stick shift because it is going to be easier for me to apply for an international license. Should I decide to visit other countries, I can still drive any car that I like and feel free to visit different places without depending on others to drive me around.

Many people do not realize how fun it is to learn how to drive an M/T unless they try it. It is great to have control of the vehicle and other aspects that come with it.

While A/T cars are faster, more efficient and convenient to drive daily however learning to drive an M/T is an impressive skill to learn. So let us get started by reading this informative article on how to drive a manual transmission car that is brought to you by

How to drive smoothly with a manual transmission

Many drivers nowadays prefer driving an A/T because it’s easier to learn and operate

Many drivers nowadays prefer driving an A/T because it’s easier to learn and operate. However, it would not hurt to learn how to drive a stick shift just like our parents.

1. Know the basics of a manual car

There are many things inside an M/T car that doesn’t exist in A/T car. Familiarize yourself with the features around you especially the pedals. You have the clutch, brake, and the gas pedal.

You use your left foot on the clutch and the right foot when stepping on the brake and gas pedals respectively. The clutch is essential when you need to shift gears because it disconnects the engines that stop your rear wheels from spinning.

2. Learn how to use the gear shifter

There is a difference in the gearshifts on an M/T vs. an A/T car, and it can become quite confusing to people who have not driven an M/T before. It is best to learn the different gears while the engine is switched off.

How to drive smoothly with a manual transmission

If you live in a village or subdivision, then you can have your driving lessons there

Safety first

  • Regardless of what vehicle you are driving do not forget to check your rearview and side mirrors to ensure that they are aligned to your vision. Mirrors are essential in terms of giving you the visibility that you need on the road. Mirrors can help minimize accidents if positioned correctly.
  • Make sure that all your lights are working for better visibility on the road.
  • Do not forget to check if your hazard lights and signal lights are working fine to avoid road accidents.

Start the engine of your car

Before turning on the ignition make sure that your handbrake is engaged for safety measures.

  • Make sure that the vehicle is in neutral gear. If you can move your gearshift from left to right without any force, then you are in neutral.
  • Start your engine by either pushing the power button or turning on the ignition (depends on what type of car you are driving, older models use keys while newer cars have the power button).
  • Step on the clutch all the way down
  • Release or turn off the handbrake
  • Shift into first gear while your feet are still stepping on the clutch
  • Step on the gas pedal gently and allow the car to accelerate forward while slowly releasing the clutch and start the drive.

How to drive smoothly with a manual transmission

Every time that you need to shift gears you need to step on the clutch, unlike A/T cars

>>> Read more:

  • Top 9 biggest mistakes when driving a manual transmission car
  • What does ‘S’ on the gear shifter mean?

Do not easily get frustrated

Most people including me also went through the process of learning how to drive a stick shift. One of the most common scenarios that you should expect is to stall while shifting gears and it is expected. With more practice and you will get the right timing all you need is to be more patient.

Learn how to shift gears smoothly

For me shifting gears is more comfortable than starting the car. Always use the “H” pattern on the gearshifts as a basis on what gear should you be using.

  • Always use the clutch pedal if you are shifting from 1st to 2nd gear and 2nd to 3rd gear and so forth
  • Follow the directions on your gearshifts, practice multiple times till you get it.
  • Always make sure to release the clutch slowly while gradually stepping on the gas pedal only applicable the first gear.
  • You can release the clutch immediately if you are shifting into higher gears. The car won’t stall once you have the right momentum.

How to drive smoothly with a manual transmission

Be patient when leaving how to drive a stick shift because it can be quite frustrating especially if your car starts to stall

3. How to reverse a manual car

  • Your car must be in full stop
  • Engage your handbrake (pull the lever upwards)
  • Step on the clutch
  • Put your car in reverse mode using your gearshift
  • Disengage the handbrake (by pushing it downwards)
  • Start releasing the clutch slowly while you are slowly stepping on the gas pedal.

Get a kind and patient instructor to teach you how to drive properly

If it is your first time to drive a car, then it is highly advisable to hire a good driving instructor who is skilled and knowledgeable about road safety and can give you a detailed explanation on how things work behind the wheel.

How to drive smoothly with a manual transmission

Enrolling in a driving school and getting lessons from professionals is definitely worth your money

4. Choose the right car with manual transmission base on your needs

We can also consider this as a factor that helps you enjoy driving your manual transmission vehicle. You can find more advice and guidance on how to choose a suitable manual transmission car in this video.

This is a very helpful video made by Philkotse experts that will provide you a list of the best manual transmission cars.

The transmission of a car transmits the engine power to the wheels. It has various gears to do the tasks of speeding up and down. A manual transmission gives more power to the drivers as they are responsible to choose which gears to shift to and when to press or release the clutch pedal. The normal driving procedure is starting the engine and then gradually accelerate the speed. But, how to accelerate faster in manual car? Is it even possible to have a quick acceleration in a stick shift? Let’s find out.

How Do We Drive Under A Normal Condition?

The engine in a manual car idles at around 700 rpm. To start driving, you have to press the clutch pedal with force, engage the first gear, and boost the revs at approximately 2,000 rpm. Then, you have to decrease the rpm by disengaging the clutch slowly. Press the accelerator while you are still releasing the pressure on the clutch. When you downright depress the pedal, it is possible to accelerate as much as you want.

How to drive smoothly with a manual transmission

Having a faster acceleration is possible in manual cars. Source:

How To Accelerate Faster In Manual Car?

You will do it the way you start the car in a normal condition but in a slightly different way. Hold the clutch, move the gear into the first mode, and rev the engine at around 2,000-4,000 rpm. The difference is you will disengage the clutch all on a sudden at this point, not gently, and press the accelerator.


  • Why Manual Transmission is Hard to Shift?
  • Which One Is Safer? Manual or Automatic Car?

The more the rpm, the more power the engine will deliver and you can release the clutch faster. You should rev until 6,000 (given that your car and engine allow it) to accelerate even faster.

Once you set the vehicle in motion, the rest of the part is easier. Go full throttle until the rev meter almost touches the red zone. At this stage, you will have to do two things side by side – taking the pressure off the accelerator and pressing the clutch pedal.

How to drive smoothly with a manual transmission

The technique is for faster acceleration, not for faster gear change. Source: Internet

Now, you can change the gear . You should use all the gears in a row for a faster acceleration because all the stick shift cars accelerate quicker in second than in third gear. Don’t forget to depress the clutch and stomp the accelerator after changing the gear.

This is the technique for the fastest acceleration in a manual car, but not the fastest way to shift.

The Problems Of This Technique

Now you know how to accelerate faster in manual car. But, it is not free of flaws. Driving your car this way will put massive stress on the clutch and wear it out pretty quickly. It can also cause potential damage to the gearbox and drivetrain. Besides, if you are driving a front-wheel drive car, your wheels will slip and tires will screech when you release the clutch pedal too fast. The wheel spin reduces the acceleration by a great margin. It will not only make your launch slower than expected but will also increase the wearing at an excessive rate.

Is It Necessary To Apply This Acceleration Boost?

The real question behind how to accelerate faster in manual car should be: “Are you an expert driver?” or “How confident do you feel of controlling car speed and of your sharp sense of your car size?”.

The aforementioned technique for how to accelerate faster in manual car is in fact applied mostly by race driver, who have sheer experience in driving in competition at high speed, and safely of course. This technique help racers to gain an initial advantage at a start of a race, to boost the speed to the top as soon as the signal is given. Moreover, when applying this technique, racers even give no care for wear and tear of the clutch pedal, the engine power and the drivetrain as long as they can win on the race road, because if they win, they can just replace for a new mechanical part.

Some may say professional drivers who are not racers can still do this technique in a manual car with ease and safety. Well, that’s quite true that due to their profession, they gradually develop a suitable strategy to apply this technique in the common streets for two following reasons:

  • To start moving the car quickly to the necessary speed after the light turns green
  • To jockey for position over 2-4 other cars at a traffic bottleneck

Therefore, mastering faster manual transmission to a certain safe level of normal driving on normal roads is extremely beneficial but it require drivers to intensively practice and fully understand their car. An effective practice exercise is to accelerate in front of a soft collapsible standing pole without touching it or pushing it away. Finally, after getting familiar with the pattern, you would be given much more confidence when it comes to how to accelerate faster in manual car.