How to apply plumber’s putty

We all have heard about the plumber’s putty a lot of times. However, if you’re a novice, and don’t have any idea what we’re talking about, plumber’s putty is a kind of adhesive putty that is used as a sealant when it comes to plumbing.

How Does Plumber’s Putty Work ?

The plumber’s putty uses come from the fact that it is a substance used for making watertight seals around sinks and faucets. It is a soft and slow hardening substance that is used for waterproofing.

How to apply plumber's putty

The slow setting nature of the plumber’s putty makes it a better option than Teflon tape and silicone when you have to make reversible seals in plumbing.

It is highly recommended to use plumber’s putty when you are replacing fixtures and are repairing any plumbing components to prevent the leaking of water. It is extremely easy to use and can easily be wiped away in case of any mess.

How to apply plumber's putty

Using a Teflon Tape to Repair the Leaking of Water Plumber

So before you begin using plumber’s putty, it is important to know how the plumber’s putty is created. Even though the exact formula might change depending on the brand of plumber’s putty, the major constituents in it include powdered clay and linseed oil. Some other types might also include fish oil, talc and even limestone.

The use of plumber’s putty reduces the chance of your water pipes from having any leaks in joints.

Plumber’s putty Uses You Need To Know About

How to apply plumber's putty

The major use of plumber’s putty is to prevent leakage from plumbing. Since it is soft, it cannot be used in areas of high water pressure. But the soft nature of the plumber’s putty means that you can remove and remodel according to your requirements before it dries.

It is important to apply plumber’s putty on all your plumbing joints and fittings to improve water proofing and to prevent any leakage. People use plumber’s putty to seal the gaps between the pipes and the countertops and to seal any leaks.

It is important to know when to use plumber’s putty. Since the putty is very soft for some duration till it dries, plumber’s putty uses are heavily restricted in places where there is high water pressure. Here are some of the places around your house where you should use plumber’s putty for maximum waterproofing.

Pipes And Plumbing

The waterproofing characteristics of the plumber’s putty make it an important sealant when it comes to sealing your pipes and other plumbing components. It is important to properly seal all the joints in pipes with plumber’s putty to prevent any kind of water leakage. But it is important to make sure that you only use the plumber’s putty on pipes that do not have too much water pressure.

How to apply plumber's putty

If there is too much water pressure, the putty will be damaged before it can set. You should also be careful while using plumber’s putty as it may contain oils and chemicals that may cause discoloration and damage to some surfaces like marble, granite, plastic and the likes.

When using the plumber’s putty on pipes and plumbing, place the putty on the inside threading of the pipes. Join the two pipes and wipe away the excess putty. This makes the pipes tight and waterproof.


When using plumber’s putty on your sink, apply a bit of the plumber’s putty around the sink to make it act as a watertight barrier. But you shouldn’t use plumber’s putty if your counter top is granite or any other porous material. If you seal your sink properly, then it becomes impossible for water to seep through and lead to water damage and mold.

When applying at the sink, you should always apply the soft plumber’s putty on the bottom of the sink and place the sink with all the pressure on the countertop. The clips in the bottom of some of the sinks make sure that only the required amount of pressure is being exerted on the putty.

Check the video below to find out how to do this


How to apply plumber's putty

You can also use plumber’s putty when it comes to sealing your drains of the bathtub or the sink. This prevents the leakage of any water coming through the drain pipes.

When applying the plumber’s putty on the drains, you should apply the plumber’s putty underneath the drain before you install the drain. This creates a watertight bond that prevents any water from leaking.


Like any plumbing component, it is important to apply plumber’s putty when installing your toilets to prevent any water leaking. Use plumber’s putty when fixing the toilet on the floor for more strength and waterproofing.

But unlike other cases, when applying the plumber’s putty on your toilet, you should not apply it all the way around the toilet.

If you seal the toilet all around and it develops leaks in the future, the water will get trapped in and begin to rot the floor without showing any signs outside. So by leaving a small gap behind, any leaks in your toilet will serve as a warning to you.

Check the video below to find out how to do this


How to apply plumber's putty

The first step in order to fix the leak in your pipes with the help of plumber’s putty is to find the leak. Once you have found the leak in your pipe, mark the leaking portion and close your main water valve. Once you have located and marked the leak in your pipe, it’s time to mix your putty.

Mix the plumber’s putty properly till it is a soft and clay-like substance and apply it around the leaks in the pipe. Make sure to apply extra putty over the crack and spread it along the pipe or the fitting for maximum waterproofing.


It is important to seal all your plumbing activities to prevent any water leaking and other problems. Although there is a range of other sealing methods available including the likes of Teflon taping and silicone, these are not applicable in all situations.

How to apply plumber's putty

The longer drying time of the plumber’s putty means that it is a better adhesive and waterproofing agent in case you wish to make changes to the plumbing. This also makes it impractical when using in pipes that have to withstand large amounts of water pressure. But it is impossible to neglect the plumber’s putty uses.

You should also refrain from using plumber’s putty in contact with granite, marble and other porous materials as the plumber’s putty may cause the surface to stain.

I hope that the readers understood about the application, advantages, and disadvantage of plumber’s putty and had learned about the correct utilization of it. With this knowledge in hand, you do not have to call your plumber when there is a small leak in your plumbing or fittings.

How to apply plumber's putty

As water leaks are the most common aspects of plumbing work, plumbers putty is one of the most vital items in a plumber’s toolbox. Used in the installation of drain pipes, sinks, and valves, plumber’s putty will ensure a watertight seal. Providing that the putty is softened before use, it’s incredibly flexible and pliant texture enables plumbers or DIY enthusiasts to apply the putty relatively easily. Plumbers putty is inexpensive, readily available from most hardware shops, and is a crucial asset in providing quality plumbing work.

Step 1 – Clean the Fittings

Before you start to use plumber’s putty, always ensure you have wiped clean the area you are going to be working on with a clean, damp cloth. Tiny molecules of dirt and dust which are not visible to the human eye may result in irregular and potholed putty which may ultimately cause water to leak through the seal.

Step 2 – Apply Heat

Heat is the vital element needed for plumber’s putty to work effectively. Trying to use the putty when it is too hard will prove an almost impossible task. Heat your hands on a radiator or rub them together and roll the substance in both hands for several minutes. Plumbers and DIYers who do not soften putty prior to use are faced with a much more difficult process.

Step 3 – Make a Snake Shape

Mold the plumber’s putty, like you are molding modeling clay, into a long, thin snake shape which should be smooth and soft in texture. Try to roll the putty into the desired size needed to seal a fitting.

Step 4 – Apply the Plumber’s Putty

Plumber’s putty is used to create seals around faucets and drains. Gently ease the putty into a ring that matches the circumference of the drain or bottom of the faucet fixture. Fit the drain or fixture into its appropriate place, and this will ensure a watertight fit and limit the chances of having a leak.

You should never use plumber’s putty to seal joints between threaded pipes, metal or plastic, or to cement together non-threaded plastic piping. Consider alternatives such as Teflon tape for sealing joints, or PVC primer and cement for attaching plastic pipes.

Step 5 – Wipe Off Excess Putty

When you apply the substance, excess putty will inevitably ooze out. It may sound obvious, but be sure to wipe off any excess plumber’s putty with your second clean, damp cloth before the material actually dries. Leaving the excess putty to dry on a fitting will prove difficult to remove and if left unattended, it will not only look unsightly but it may also hamper the effectiveness and quality of the plumbing job.

Step 6 – Let the Putty Dry

Do not be over enthusiastic in trying out your plumbing work by running water before the plumber’s putty is dry. By gently prodding the substance with your finger several hours after applying it, you can decide whether it is dry enough to be safe to use. Premature use may cause the seal to break and the whole process will have to be repeated.

Although plumber’s putty is an effective, inexpensive, and easy way to install faucets and drains and seal leaks, it can cause a minimal amount of staining to surrounding areas like white cupboard fronts or drawers, so be careful to keep application under control. If you are worried about causing unsightly stains, silicone caulk can be used as an alternative to plumber’s putty.

When you purchase through links on our site, we may earn commissions at no cost to you.

How to apply plumber's putty

Related Articles

  • How to Loosen a Sink Fastened With Silicone
  • How to Cut Out a Sink Hole in Laminate Countertops
  • How to Cut Formica to Install a Kitchen Sink
  • How to Replace the Kitchen Sink Strainer and Bowl
  • How to Tighten Sink Screws

When you’re installing a new basin sink, you must properly seal the edge of the sink where it rests on the countertop. This seal prevents water from leaking and causing damage to the countertop and the area beneath your sink. Silicone caulk is sometimes used to seal around sink basins, but plumber’s putty is another option that is easier to use and it provides a watertight seal that is durable and long-lasting.

Measure and mark the center of your cabinet on the countertop.

Center the sink template, which typically comes with a new sink, on the sink cabinet using your mark as a guide.

Check that the template is at least 1 1/2 inches back from the countertop’s front edge. If your countertop is deeper than 2 feet, you can place it slightly farther back from the front edge.

Tape the template to secure it in place and outline it with a marker.

Remove the template and drill a hole about 3/8-inch in diameter into each corner of the template, keeping the hole just inside the edge of the marker line. These holes mark your start line for the cuts.

Apply masking tape just outside the outside of your template lines to make sure the jigsaw doesn’t damage your countertop when you cut.

Place a scrap piece of wood that is a couple of inches longer than the depth of the cut-out over the counter. Drill a couple of screws into each end to hold it in place. Place the screws into the countertop area that will be removed. This prevents the cut-out from snapping off or falling as you cut.

Cut along the inside of the template lines with a jigsaw. Begin at one corner hole and cut to the opposite hole. Continue until you’ve cut along the entire template.

Lift the cut-out piece from the countertop and set it aside. Place the sink into the opening to check the fit.

Trim the edges if necessary, and then mark the holes required for the faucet using the holes in your sink as a guide.

Cut out the holes for the faucet using a 1-1/4-inch hole saw. The size of hole saw you’ll need may vary if you’re installing a non-standard or custom basin. Check the manufacturer’s instructions for the proper size.

Turn the sink upside down and insert the faucet tailpieces through the proper holes in the basin. Connect the washers and mounting nuts provided with the faucet.

Roll some plumber’s putty between your hands to soften it and then press it around the underside of the sink strainer lip.

Place the strainer into the opening in the bottom of the basin and secure it in place by installing the washer and gasket provided with the strainer.

Slip the lock nut onto the bottom of the sink strainer and tighten with a wrench. Remove excess putty from around the strainer inside the basin with a damp cloth.

Roll another ball of plumber’s putty between your hands and press it around the edge of the cut-out in the countertop.

Insert the sink into the opening but avoid disturbing the putty. If your basin is heavy, get a helper to hold one side while you hold the other to set it in place.

Press down firmly along the lip of the sink basin. Tighten the mounting clips using a screwdriver. Most sinks use mounting clips to pull them down tight to the countertop. Follow the manufacturer’s instructions for installation and spacing of these clips, which may vary depending on the brand and size of your sink.

Wipe away excess putty from around the edges of the basin lip with a damp cloth.

Plumber’s bag and no putty (plumber’s putty) in it, strange! No matter for a big or small task you call a plumber at your home, they always bring their putty bottle along because it helps in finishing afterward. Not only plumbers, but you can also make use of this putty bottle at home. With it, you can stop the water leakages anywhere in the house; for example, bathrooms or kitchen. But before applying the putty yourself, make sure to remove the earlier putty completely; this is done so that it does not get over coated and cause trouble later. Now, how to clean plumber’s putty with no plumber in the house?

It is very easy: use its breaking point to break it more; you can use the putty knife for clean removal. The old dried putty is very easy to remove. Carefully clean all the particles so that the new putty you apply on it. Then, stick firmly to the surface, and do not use any holes or problems later.

Here’s a complete guide on how to clean plumber’s putty.

Plumbers putty uses:

Why applying plumber putty once it is broke and what are plumber putty uses is something every house owner should know. This waterproof putty, not only stops the water leakage or acts as a seal on pipes; it also helps to fix the spaces in sanitary or drainage pipes. But you cannot use it where adhesive strength is required. It may act as a fixture for some time; however, too much pressure will break it. So, try to fix such areas with watertight seals implanted by the professional plumbers.

Putty needs to be applied again at the places where they are already fixed; in the bathtubs, sinks, or anywhere, either on the top of sink strainers or undersides or at the popup drain fittings. Putty needs to be refreshed after some years or so.

Plumbers putty substitute:

Caulks were used before the putty but now people prefer plumbers putty. This is mostly because of the neat look it gives and long-lasting usability. Plumbers themselves do not go after any plumbers putty substitute; this is because putty is very easy to remove, apply, and makes the clients happy and less complaining.

How to soften plumbers putty and apply:

This inexpensive, widely used and widely available plumbers’ putty should be softened before applying. Hard putty do not fit properly and becomes difficult to mold in shapes. If not applied evenly can cause its breakage early. To avoid any bad consequences of water leakage even after applying plumbers putty, make sure to learn how to soften plumbers putty. Such instructions are already given and mostly new plumbers putty bottle, usually comes in sealed packaging is already soft in nature. You just have to make a shape of it as the drainage or leakage demands and apply it.

But if you have already owned a putty bottle and it was not closed airtight, chances are putty must have turned hard. To soften it you can spread the dough on your hand and by passing small pieces of it in the between the hands; the warmth of hands might relax or soften it. If not so, and you are not in rush then make use of flaxseed oil. To do this, pour some oil in the putty bottle and close it air tightly. Then, store it in a dry or cool place for a few days. It will surely make the putty flexible and it will be easier to use.

Warning alert; do not microwave it.

Just do not do so, because the heat will not only harden it but also damage its sealant. Also, heating chemicals (plumbing chemicals) where food is being heated or prepared is very dangerous.

Now you know how to soften plumbers putty, so let’s see how to apply it. As told above, do not apply putty on dried or broken putty. Before applying, make sure to remove all the old pieces of putty; if any part is left, it will cause water to pass through it and will result in spongy, uneven sealant and the risk of its breakage will be there. Once you witness the no dust or any tiny molecules of old putty then your place is ready for new putty installation.

Before starting the applying process, make sure your hands are hot enough that heat in them can make the putty roll easily. This is for softening the old or new plumbers’ putty, as you know how the importance of soft putty. Now create the desired shape of the putty by rolling it in your hands. Start making a thin, soft and smooth texture snake shape and gently apply it into the ring in a way that it ensures tight-fitting and no risk of leakage. Do not rush to clean the excess putty as it will flow obviously; do not use water or knife to remove that instead, use a damp cloth and clean that.

Plumbers putty dry time:

The most important part of them all is the plumbers putty dry time because the more you will give putty time to get dry the more it will last long. Better to give it several hours to dry out, if you will flesh water on it or open the tap, chances are it will destroy the putty and you have to repeat the cleaning and applying process. In fact, putty bottles come with the instruction of its dry time duration, imply follow that and try to give it more time to fix, if you can because better to wait than using premature plumbers putty and regret later.


Now you know how to clean plumber’s putty and with that you know, how to apply and do the plumber’s work on your own. Make sure, once you buy the plumbers putty bottle, after using it, keep the rest by closing its lid air tightly. If you will do so, no matter after how long you will open the bottle,, it will be soft and easy to use again.

How to apply plumber's putty

Related Articles

  • How do I Install a PVC Drain Fitting Kit for a Double Sink?
  • How to Care for Home Drains
  • How to Install a Drain in a New Sink
  • How to Make Your Sink Drains Shiny Again
  • How to Putty a Shower Drain

Plumber’s putty is a soft, moldable sealant that is formulated for use in plumbing applications. It is commonly used when installing bathroom sink drains, and provides a leak-proof seal that can last several years. Plumber’s putty stays soft for a long time, making it easy to remove the drain and make corrections, if necessary. Using plumber’s putty on a bathroom sink drain is a simple task that most homeowners can accomplish themselves.

Turn off the water supply at the valves beneath your bathroom sink. Alternatively, turn it off at the main shutoff valve. Put a bucket under the sink, positioning it beneath the P-trap — the curved pipe connected to the tailpiece.

Loosen the nuts at each end of the P-trap, using a pipe wrench. Remove the P-trap. Let water and debris inside the P-trap drain into the bucket.

Loosen the nut connecting the tailpiece to the drain, using a pipe wrench or pliers. Remove the pipe.

Tap on the bottom of the flange from under the sink to loosen it from the drain, using a wrench. Alternatively, if you have a pop-up assembly, unscrew the assembly from the sink strainer.

Loosen the strainer nut at the base of the drain. Ask an assistant to hold two screwdrivers in the drain from above to stop it from spinning, if necessary.

Pull out the old sink strainer or flange. Wipe around the drain opening with a damp cloth to remove remaining residues and debris. Let the sink dry.

Remove a piece of plumber’s putty from its container and roll it between your hands to soften it. Form the putty into a rope, 1/8 inch to 1/4 inch thick.

Press the putty rope around the underside of the flange. Press the drain assembly into place in the drain opening. Press around the flange to ensure a watertight seal.

Scrape away excess putty around the sides of the flange, using a putty knife.

Replace the tailpiece and the P-trap. Tighten all connections with a pipe wrench.

Test the drain for leaks by filling it with water. If the drain leaks, remove the drain and repeat the putty application.

How to apply plumber's putty

What color is plumbers putty?

Do not use plumber’s putty where you need adhesive strength (to bond materials or prevent them from moving) or where you need a watertight seal in exposed areas.

Table of Contents


How do you wire a 240v Baseboard Heater?

What does the lever on my fireplace do?

Color White
———————————- ————–
Global Trade Identification Number 00054647010403
Included Components Putty
Item Weight 15.5 ounces
Material Other

Thereof, Is it better to use plumbers putty or silicone?

Silicone caulk can be used for any kind of purpose but it works much better for woodworking, ceilings, and walls. You can use it in all the places where soft material like plumber’s putty will not do any good. … Silicone caulking will make a hard sealant and will provide strong protection for a long time.

Also to know is, Why can’t you use plumbers putty on plastic? This putty is not meant to be used on plastic or marble at all, due to the way it has been made, because it will stain that material. The putty is non-drying and resists any seepage caused by liquid.

Subsequently, question is, Is there something better than plumbers putty? Silicone caulk can be used for any kind of purpose but it works much better for woodworking, ceilings, and walls. You can use it in all the places where soft material like plumber’s putty will not do any good. … Silicone caulking will make a hard sealant and will provide strong protection for a long time.

Also, Should I use silicone or plumbers putty for sink drain?

You must seal the area between a sink’s drain body and the actual sink surface. Otherwise water will leak out between the two and begin dripping under the sink. Some plumbers and installers favor plumber’s putty for installing drains, while others lean toward the more modern waterproof material called silicone caulk.

Should I use plumbers putty on sink drain?

It is commonly used when installing bathroom sink drains, and provides a leak-proof seal that can last several years. Plumber’s putty stays soft for a long time, making it easy to remove the drain and make corrections, if necessary. … Turn off the water supply at the valves beneath your bathroom sink.

What can be used instead of plumbers putty?

Silicone Caulk Installation Like the plumber’s putty, some silicone caulk may squeeze out from between the drain body and the sink, which you must wipe off before it hardens. To remove hardened silicone caulk, you must purchase a caulk softener solution at a hardware or home improvement store.

Do they make black plumbers putty?

Black Swan 45377 Stainless Plumber Putty.

How long wait plumbers putty?

If you wait for it to dry, you’ll be waiting maybe 10/15 years. It doesn’t “dry”, but it will “dry out”. You can use the fixture immediately after installation with putty.

Can you use silicone instead of putty?

Silicone caulk can be used for any kind of purpose but it works much better for woodworking, ceilings, and walls. You can use it in all the places where soft material like plumber’s putty will not do any good. Silicone caulking is also used for sinks, pipes fittings, and bathtubs.

Should I use plumbers putty when installing a faucet?

The faucet will typically come with a rubber or plastic gasket, or a trim ring, that you will need to place over the faucet holes in the sink. Sometimes, you may be directed to use plumber’s putty instead of a gasket. … Either way, the point of these pieces is to keep water from leaking from the sink into your cabinet.

Do you have to let plumbers putty dry?

You can start using the sink drain or faucet immediately after installing plumbers putty. There is no drying time because it doesn’t dry. It just seals the gaps and the sink, drain, or faucet which can be used immediately after application of the plumbers putty.

What is better than plumbers putty?

Silicone caulk can be used for any kind of purpose but it works much better for woodworking, ceilings, and walls. You can use it in all the places where soft material like plumber’s putty will not do any good. Silicone caulking is also used for sinks, pipes fittings, and bathtubs.

How do you seal the base of a faucet?

Apply a bead of plumber’s putty or silicone caulk around the bottom of the faucet or the faucet holes on top of the sink, if called for in your instructions. Place the faucet gasket over the tailpieces so that it is between the sink and the base of the faucet.

Does plumbers putty get hard?

It doesn’t “dry”, but plumbers putty will “dry out“. … Plumber’s putty should be pliable and easy to roll. If it’s too hard to roll or it cracks when you try to shape it, it is too old and dried out. Get a new tub of putty.

Do I need plumbers putty for bathtub drain?

A bathtub drain flange is the finished drain part that’s visible in the tub. … Between the underside of the flange and the tub surface, there’s a good amount of plumbers putty that seals the inside of the drain. A rubber gasket underneath the tub seals the drain elbow to the tub.

Can I use plumbers putty on ABS?

A pliable, clay-like substance, putty has been used for decades to create watertight seals between surfaces in and around faucets, sinks, and drains. … For this reason, Sioux Chief always recommends the use of silicone caulk when sealing ABS or PVC shower drains to the shower floor.

Don’t forget to share this post 💖

How to apply plumber's putty

Dinner’s over, and it’s time to wash the dishes. With sleeves rolled up, you reach to turn the water on, and you’re surprised by a squirt in the face from a leaky kitchen faucet base. “Oh, no,” you say, “I need to seal that.” Or maybe you are installing a new faucet.

You’re not intimidated, though. You have tools, a wrench, at least, and you can search online for how-to solutions. It can’t be too hard, you say to yourself. And, you’re right.

First Things First to Seal the Base

As with any leak, turn the water supply lines off first. Reach under the kitchen sink and turn the water off to the faucet. Righty tighty is the rule. That was pretty easy.

Secondly, remove the dishes from the kitchen sink and spread a hand towel over the drain. You don’t want anything going down the drain.

Thirdly, get your wrench and work gloves. And, finally, with the water supply lines off and no chance of another squirt in the face, loosen and remove the base.

Choosing Your Kitchen Faucet Sealant

An Internet search tells you there are three main choices:

  • Silicone caulk
  • Plumber’s Putty
  • A new O-ring

Teflon tape might be a helpful option in some instances, too, but it’s not applicable here as there’s no pipe thread needing attention.

You know the O-ring is fine because you installed a new one just last month. So, let’s focus on the first two, silicone caulk and plumbers putty.

Choosing between Silicone Caulk and Plumber’s Putty

Each of these options is easy to work with, and each can be effective in sealing a faucet leak. The determination of which to use in your case will depend, in part, on the size of the project.

Silicone caulk will dry into a hard form, while plumber’s putty will always remain soft. The former will need time to harden, while the latter needs no time to cure.

Plumber’s putty is not an adhesive. It’s a soft and pliable sealing compound used by plumbers and DIYers to form a watertight seal around faucets, a sink drain, sinks at the counter joint, and other plumbing parts.

The putty is naturally resistant to water and works best if a sealant is needed in only a small area. It’s also very easy to work with.

Working with Silicone Caulk and Plumber’s Putty

You’ve made your choice of a cure for your leaky faucet base, made the purchase, and are ready to work. Each is easy to work with and is pretty straightforward in approach.

For plumber’s putty, take a ping pong ball size of putty, roll it between your hands into a cigar, and form it into a circle that will match the circumference of the leaky faucet base.

The base is then fit into the putty to form a good seal all around and secured into place again. Clean excess putty with your finger, make sure it looks neat around the perimeter of the base plate, and you’re done.

Bigger projects that will require a lot of sealant will be better served by using a silicone caulk that will be allowed to dry.

Silicone caulk will come in a tube, like toothpaste but with a longer nose for a more particular and localized squeeze. It’s easy to apply in the circle around the base of the leaky faucet. Then fit the base plate into the caulk, and secure the base into place again.

For an added measure, squeeze a thin stream of caulk around the outer base of the faucet. Smooth that stream around the base with your finger like you would smooth putty around a window piece of glass. Clean your finger with warm water and soap before the caulk has a chance to dry.

Sourcing Plumber’s Putty and Silicone Caulk

DIY stores, you know their names, your neighborhood hardware stores, and dedicated plumbing supply stores, will offer many choices for putty or silicone products. The salespeople can be very helpful in selecting the best product for your needs, and the right amount to buy for the job.

Because faucets, bases, sinks, and plumbing systems generally do occasionally sprout leaks from time to time, it might be a good idea to buy a little more than you need for the immediate job. It’s always better to have and not need than the other way around.

Final Steps

You’ve finished applying the right sealant for your leak, and the faucet base has been put back in its proper place and secured. There are just a few final steps to take:

  • If you’ve used plumber’s putty, and since it does not require drying, you can turn the water supply back on. This time, lefty loosey.
  • If you’ve used silicone caulk, follow the drying time instructions on the container before you turn on the water.
  • Remove the cloth over the drain.
  • And when the water is back on, wash those dishes.

Don’t be intimidated by the task. It’s something you can do for yourself. You’ll have saved yourself a plumber’s house call, not an inexpensive thing. And, you’ll have the satisfaction of having done the job yourself.

How to apply plumber's putty

Do you need to make a watertight seal somewhere in your home? Then plumber’s putty may be the solution you’ve been looking for.

Here’s what you need to know about how to use plumber’s putty before you decide whether or not it is right for your home. If you want to use it but you’re not comfortable applying it yourself, call us at One Source today. We are your plumber in Colorado Springs and we’ll get everything sealed for you fast.

What is Plumber’s Putty?

Plumber’s putty is a soft, pliable compound that can be used to make watertight seals. It used to be a plumber’s best friend. Now, many plumbers choose to use caulk instead. However, there are still times and places where plumber’s putty is the best option.

What is Plumber’s Putty Used For?

A plumber may choose plumber’s putty whenever he wants to be able to remove the seal later on. Because the putty stays soft for a long time, it can be peeled off a pipe or a joint years later without leaving a residue. Plumber’s putty is also better at filling wide gaps than caulk or other substances are.

How to Apply Plumber’s Putty

It’s easy to use plumber’s putty. Simply get a ball of it, roll it in your hands until it is warm, and make a long roll. Place that roll wherever you need a seal. Then install the second part, the one on the other side of the seal.

How Long for Plumber’s Putty to Dry?

It doesn’t have to dry! In fact, it should stay soft for a long time! If it dries, the seal may break as it cracks.

When you need a “plumber near me” to help with plumber’s putty at your house, call us at One Source!